1-800-419-3436 / 1-800-102-3436 
Support Desk
×
All the transactions performed on 2.0 is available here. To access Market click "Home".
Features - 110 dB of dynamic range from 20 MHz to 8 GHz,105 db of Dynamic range from 8Ghz to 40 Ghz, 650 s/data point for fast field measurements. 1-port measurements Return Loss, VSWR, Cable Loss, Distance-To-Fault, Smith Chart, 1-port phase. 2-port measurements Transmission Measurement and Swept Cable Loss. 8.4 inch touchscreen with daylight/nighttime viewable modes. Explosive Atmosphere MIL-PRF-28800F Section 4.5.6.3 compliant. Fully reversing sweep, Simultaneous measurement of all 4 S-Parameters for a 2 port device. User configurable quad display in 1,2,3 or 4 display trace format with any combination of trace overlays. Large selection of graph types, including Real Impedance and Imaginary Impedance. Reference plane extension both ports feature also allows compensation for loss. Interpolation user selectable on/off reduces need to re-calibrate..
| Other Specifications Download Specification | |
|---|---|
| Description Of The Item | Two port vector network analyzers 6GHz(without spectrum analyser) |
| Frequency Range | NA |
| Aging Rate Of Spectrum Analyzer Frequency: Better Than 1x10-6 /Year | NA |
| Frequency Counter Resolution(min.) | NA Hz |
| Frequency Span | NA |
| Spectral Purity:SSB Phase Noise @10KHz Offset Shall Be Less Than -90dBc/Hz At 1GHz | NA |
| Spectral Purity :Harmonics @ -40 DBm Level Shall Be Less Than Or Equal To -60dBc | NA |
| Sweep Time @span >or= 1 KHz | NA |
| Sweep Time @span = 0 Hz | NA |
| Resolution Bandwidth (-3dB) | NA |
| Video Bandwidth | NA |
| Amplitude : Max Input Level For Protection | NA dBm |
| Amplitude : Max Input Level For Measurement | NA dBm |
| Amplitude :level Measurement Uncertainity | NA dB |
| Average Noise Level Displayed | NA |
| Markers | NA |
| Trigger | NA |
| Display | TFT Colour display |
| Interface | USB and LAN |
| Measurement Features | NA |
| Software For Transfer Of Screen Shot/measurement Data To PC | Yes |
| 2-port Vector Network Analyzer Functionality ,for General Purpose Testing Applications In The Field,specially For Cable And Antenna Measurements, Is Available. | Yes |
| Frequency Range For 2port Vector Network Analyzer | 2 MHz to 6 GHz |
| Frequency Resolution (CW ON) For 2port Vector Network Analyzer | 10 Hz |
| Return Loss For 2port Vector Network Analyzer | 0.00 to 60 dB |
| VSWR For 2port Vector Network Analyzer | 1.01 to 10.00 |
| Cable Loss For 2port Vector Network Analyzer | 0.00 to 30.00 dB |
| For 2port Vector Network Analyzer: Calibration With Precision Calibration Components-open, Short, Load Should Be Included To Achieve Directivity > 35 DB | Yes |
| For 2port Vector Network Analyzer: Distance-to-fault In Co-axial Cables Shall Be Possible | Yes |
| Phase Range For 2port Vector Network Analyzer | -180 to +180 degree |
| Phase Resolution For 2port Vector Network Analyzer | 0.01 deg |
| RF Output Port For 2port Vector Network Analyzer | Type N, female, 50Ohm |
| Dynamic Range For 2port Vector Network Analyzer | 60 dB |
| Nominal Port Power Output For 2port Vector Network Analyzer:Hi Power/Lo-Power Selectable(power Levels Corresponding To Hi And Lo Levels Shall Be Indicated By Bidder. | 1 MHz to 8 GHz: +5 dBm, typical (High); –20 dBm, typical (Low) >8 GHz to 40 GHz: –3 dBm, typical (High); –20 dBm, typical (Low) |
| Measurement Of S11 & S21 And Smith Chart Measurement Shall Be Possible | Yes |
| For 2port Vector Network Analyzer :Vector Voltmeter For Comparision And Verification Of The Phase Of The Phase-matched Cables Shall Be Available | Yes |
| For 2port Vector Network Analyzer:Group Delay Measurement Shall Be Possible.Details To Be Declared | Yes, Less 180 degree of phase change within the aperture |
| Operating Temperature | 5 to 40 degree C & 80 RH 40 degree C |
| Power Requirement | 230 +- 10 VAC, 50Hz |
| Warranty | 3 years |
| OEM Shall Have ISO:14001 Certification For Their Manufacturing Works | yes |
| One Set Of Operation And Maintenance Manual Shall Be Supplied | yes |
| Standard Accessories Shall Be Supplied | yes |
| Availability Of Test Reports From Central Govt/NABL/ILAC Accredited Lab Covering All The Features & Functional Requirements Including Environmental Tests As Per Specifications | yes |
| Test Report No | A2LA Cert. No. 2160.01 |
| Test Report Date | 06/01/2016 |
| Name Of Lab | Anritsu Company |
| Address Of The Lab | 490, Jarvis Drive, Morgan Hill, CA 95037 USA |
Price Dekho Price List in india© 2018 GeM All rights reserved.
