MX104 Chassis with 4 MIC Slots, 4X10GE XFP Built-in Ports License required for activation, AC Power Supply, Fan Tray w/Filter, Packet Forwarding Engine Routing Engine with bundled interfaces and licenses.
Other Specifications Download Specification | |
---|---|
Common Features : (a)Rack Mountable Standalone / Chassis Based Or Equivalent (b)BGP And IPv6 Enabled From Day 1(c)Higher Speed Interface Module Support – STM-1(d)Backplane Performance Be At Least 10Gbps To Ensure Scalability | Yes |
Support Feature : (a)Should Support IP And MPLS Etc.(b)The Modules And Power Supply Should Have Support For Hot Swappable Functionality.(c)Router Performance Should Support 100K For Both IPv4 And IPv6. And Should Support IPv4 And IPv6 Routes-30K Multicast. (d)Power Supply For 230 V AC 50 Hz With Redundant Power Supply | Yes |
Interface / Slots : (a) 1-port OC-3/STM-1 (E1/T1) Or Centralized STM (Total 2 Ports Single Mode From Day1 )(b)2 Nos. Of 1G Ports With LX 1SFP Modules(c)4 Nos. Of 10/100/1000 Mbps Ethernet Ports (scalable To 8 Ports ) . (d)Should Support Minimum 3 I/O Slots(e)Shall Support Variety Of Interfaces Like E3 And Ch-E1 And E1 And G703 Interfaces As Per ITU-T Standard.(f)Should Have Serial V.35 / E1 Interfaces And 8 Ports And Necessary Cables(g)Console Port - 1 Numbers | Yes |
Security : (a)Support For IPSEC Site-to-Site. Should Provide A Hardware Assisted IPSec With Encryptionperformance Up To 150Mbps.(b)Shall Support For NAT And PAT(c)Access Control – Multilevel(d)Support ACL’s To Provide Supervision And Control.(e)Multiple Privilege Levels For Managing & Monitoring(f)Support For Remote Authentication User Service (RADIUS) And AAA(g)Support For Standard Access Lists To Provide Supervision And Control.(h)Controlled SNMP Access Using ACL On Router To Ensure SNMP Access Only To Identified NMS/EMS(i)PPP CHAP Support. PAP (optional)(j)DoS Prevention Through TCP Intercept & DDoS Protection(k) EAL/NDPP Certified. | Yes |
Routing Protocols : Static RoutesRIPv1, RIPv2, RIPngOSPFv2 And V3.BGP And BGP4+IS-IS And IS-ISv6Route Redistribution Between Any Of The Above Protocols | Yes |
Protocols : (a)PPP And Multi-link PPP(b)IPv4 And Should Support IPv6(c)MPLS L2 & L3(d)VRRP / HSR(e)Shall Support IPv6 Features: DHCPv6 And IPv6 QoS And IPv6 Multicast Support And Multicast VPN And PIM(f)SSM (Source Specific Multicast) And IPv6 PIMv2 Sparse Mode And IPv6 PIMv2 Source-Specific(g)Multicas(h)MPLS Features: MPLS VPN And MPLS (mVPN (Multicast VPN) And Carrier Supporting Carrier (CsC) And (i)DiffServ Tunnel Modes And MPLS TE And DiffServ-Aware TE And Inter-AS VPNs | Yes |
Congestion : (a)Random Early Detection(b)Weighted Fair Queuing (c)Priority Queuing | Yes |
IP Multicasting : IGMPv1&v2 And PIM-SM And PIM-DM Or MOSPF | Yes |
Management : (a)Accessibility Using Telnet And SSH And Console Access.(b)Software Upgrades Using FTP And TFTP And Etc.(c)SNMP Support For V1 And V2 And V3 | Yes |
Debug & Diagnostics : (a)Display Of Input And Output Error Status On All Interfaces(b)Display Of Dynamic ARP Table(c)Display Of Physical Layer Line Status Signals Like DCD And DSR And DTR And RTS And CTS On All Interfaces(d)Should Have Support For SLA Monitoring For Metrics Like Delay And Latency And Jitter And Packet Loss And MOS | Yes |