"Product Catgeory","signal generator"
"Product Name","signal generator"
"Specification Title","Specification Value"
Type,"RF Signal Generator"
"Frequency  Range","9 KHz to 6 GHz"
"Frequency Resolution","0,1"
"Ageing Rate for reference frequency (As declared by OEM)","Less than 2"
"Temperature stability for reference frequency","Less than 2"
"SSB Phase Noise at 1GHz,on 20KHz offset (dBc/Hz)","less than -105"
"Harmonics at 3 GHz level at 0 dBm","less than  -30"
"Non Harmonics (>10 KHz carrier offset)","less than -60"
"Non Harmonics (>50 KHz carrier offset)",NA
"Reverse Power Protection","50V DC, 20W at 6GHz Watt"
"Minimum Output Level",-120
"Maximum Output Level",+13
"Output Level Resolution","0,1"
"Total Accuracy forall specified Output Level at 25 Degree C in continuous wave mode","+-0.8 "
"VSWR on all operating frequencies",1.9
"Memory (Minimum Storage Settings)",1000
"Amplitude Modulation (AM) Operating Modes","Internal & External"
"Minimum Amplitude Modulation Frequency (3 dB), f > 100 KHz","DC or 10Hz Hz"
"Maximum Amplitude Modulation Frequency (3 dB), f > 100 KHz","50 KHZ"
"Modulation Depth","0 to 100"
"Resolution of AM",0.10
"AM Distortion at 1 KHz",<2
"Frequency Modulation (FM) Operating Modes","Internal & External"
"Minimum Frequency Modulation Frequency (-3 dB) Standard","DC or 1Hz"
"Maximum Frequency Modulation Frequency (-3 dB) Standard","7 MHZ"
"Minimum Frequency Deviation",1
"Maximum Frequency Deviation","40 MHZ"
"Resolution of FM","0.025 of deviation or 1 Hz"
"Setting Error (at AF=1 KHz and 50% max. Deviation) for FM",<0.4
"Phase Modulation",Available
"If Available, Phase Modulation Operatinf Mode","Internal & External"
"Minimum Phase Deviation","1.25 Rad Radians"
"Maximum Phase Deviation","20 Radians Radians"
"Resolution of Phase Modulation",1
"Setting Error (at AF=1 KHz) for Phase Modulation","< 0.2 (typ) [1 kHz rate"
"Internal Modulation Generator For AM/FM/PM","0.1 Hz to 2 MHz tunable to 3 MHz with resolution of 0.1 Hz"
"Pulse Modulation",Not-Available
"If Available, Pulse Modulation Operating Modes",NA
"Rise and Fall Time",NA
"On/Off Ratio",NA
"Minimum Pulse Width",NA
"Input Level",NA
"RF Digital Sweep Range and Width","9KHz to 6GHz"
"RF Digital Sweep Time Range","100 s to 100 s"
"RF Analog sweep",Not-Available
"If Available, RF Analog Sweep Range and Width",NA
"RF Analog Sweep Time Range",NA
"Pulse Generator",Not-Available
"If Available, Pulse Generator Operating Mode",NA
"Pulse Width",NA
"Pulse Delay",NA
"Pulse Period",NA
"Vector Modulation",Not-Available
"Internal Base Band Generator Bandwidth",NA
"Arbitory waveform memory",NA
Modulation,NA
"Error Vector Magnitude (EVM)",0
"Phase Modulator",Not-Available
"If available, Range of Modulating Signal (Wide Mode)",NA
"If available, Range of Modulating Signal (Narrow Mode)",NA
"Interface Available","USB, LAN, GPIB"
"Standard Acessories (To be supplied)","Country-specific power cord Documentation set (CD-ROM) 3-year return-to-JK warranty"
"Power Requirements","230 V +/-10 AC, 50 Hz +/- 3"
"Operating Temperature Range","0 to 55 degree"
"Operating Humidity (RH)","Relative humidity at 95, 40 degree C "
""Availability of Test Reports from Central Govt / NABL approved / ILAC acredited lab to prove conformity to the specification including environmental tests as under :                                1. Dry Heat Test : 45 deg C for 16 hours as per IS:9000/Pt.3/sec.5/1977  (reaffirmed in 2007)  2. Cold test : 0 deg C for 4 hours as per IS:9000/Pt.2/sec.4/1977  (reaffirmed in 2007)  3. Damp Heat Test: 95% RH at 45 deg C, two cycles of 24 hours each  separated by a gap of 4 hours as per IS:9000/Pt.5/sec.  1/1991 (reaffirmed in 2007)  All the functional paramteres are to be verified before and after recovery  period of 1 hours of above environmental test sequence as above. There shall be no deterioration in functional parameters.",Yes
"Test Report No.",1016QFL04
"Test Report Date",05/09/2016
"Name of the Lab",JAS-ANZ
Warranty,3