"Product Catgeory","composite hand held terminal"
"Product Name","cpu stand"
"Specification Title","Specification Value"
"Display Size",25
"Display Type","Colour TFT"
"Display Resolution",27
Backlight,"LED Backlight"
"Light Immunity","Clear Visibility and legibility under direct sunlight"
Processor,"Dual Core or higher ARM"
"Processor Speed",1
"Operating System","Android 4.0 or higher"
RAM,256
"Inbuilt Storage (Flash Memory)","1 or higher"
"Storage Expandability through Micro SD Card",8
"Integrated QRcode/ Barcode Reader",Available
"Scanning Speed of QRcode/ Barcode Reader",NA
"Camera (for Reading QRcode/ Barcode)",Available
"Camera Resolution","Minimum 5 Mega Pixel with Flash"
"Key Pad","Hard alphanumeric"
Interface,"USB 2.0 or higher"
"WI-fi Connectivity",Available
"Bluetooth Connectivity",Available
"GPS Connectivity",Available
"GSM SIM Slot",Available
"No. of SIM Available","Single SIM with 4G"
"SAM Slot",Available
"Built-in Speaker",Available
"In built Debit /Credit Card Reader",Available
"In built Debit /Credit Card Reader specification","Inbuilt IC Card and MSR Card Supported with PCI 4.0 or higher Compliance and EMV (Europay, MasterCard and VISA) L1 & L2 Certification"
"In built Contact smart card Reader/Writer",Available
"In built Contact smart card Reader/Writer","Inbuilt Minimum 1 number of contact type smart card reader (SCOSTA Compliant)"
"Integrated Printer","Minimum 2 thermal / Dot Matrix Printer integrated with hand held device"
"Software Development Kit (SDK)","Appropriate SDK need to be provided along with device"
"Inbuilt Finger Print Scanner",Available
"Inbuilt Finger Print Scanner specification","Aadhaar enabled In-built finger print scanner with latest certification.  UIDAI/STQC certified finger print sensor and Scratch resistant sensor surface"
"Battery Chemistry","Lithium Ion"
"Battery Capacity",5000
"Battery Back up (Device in operation while all function of device active)","Minimum 6"
"Connectivity (presence/absence) Indicator",Available
"Signal Strength Indicator",Available
"Battery Status Indicator",Available
"Accessories to be supplied with the equipment","Supply Carrying case and User manual along with the devices."
"Terminal Management","Device is remotely manageable in secured mode through functionality like MDM"
"Certifications Required",NA
"Environmental Resistance (IP Rating)",Available
"If Available, Environmental Resistance ( IP 54 or better)",65
"Drop /Free Fall Test","Drop /Free Fall test in unpacked, switched off and normal handling conditions (Height: 1.2 m , Total No. of falls:2)"
"Vibration Test","Vibration Test should be in packed condition, switched off condition (10-150Hz, 0.15mm/2g, 10 sweep , cycles/axes)"
"Bump Test","Bump test should be in packed condition, switched off condition. (1000 Bumps, 40g, in vertical position"
"Operating Temperature Range","-10 to +50 degree Celsius"
"Operating Humidity","10  90 noncondensing"
"Dimensions (H x W x L)",35x25x15
Weight,500
"BIS Registration no. under Compulsory Registration Scheme & its Validity",Yes
"Availability of Test Reports from Central Govt / NABL approved / ILAC acredited lab to prove conformity to the specification including environmental tests as under :                                (a) Dry Heat : For 16 hrs. at a temp. of 55 degree C in accordance with IS:9000/part-3/section-5/1977 (reaffirmed in 2007). (b) Cold Test : For 4 hrs. at a temp. of -10 degree C in accordance with IS:9000/part-2/section-4/1977 (reaffirmed in 2007). (c) Damp Heat (Cyclic)Test : For 2 Cycles of 24 h each at a temp. of 40 degree C & 95% RH in accordance with IS:9000/part-5/section-1/ 1991 (reaffirmed in 2007). After environmental conditioning sequence  as above and a recovery period of two hours, the instrument shall be checked for complete functional parameters, which should be with in limits including 1:1 authentication (Test reports are to be furnished when demanded by buyer)",Yes
"Test Report No.",NA
"Test Report Date",NA
"Name of the Lab",NA
Warranty,1