"Product Catgeory","dewatering pumps"
"Product Name",nff500
"Specification Title","Specification Value"
"Indian Standrad for Code of acceptance tests for centrifugal, Mixed Flow and Axial Pumps.","IS:9137  latest Amendment"
"ISI marked",No
"CM/L No. and date (If Yes) , otherwise put NA",NA
"Make of Pump",NewAge
"Model No. of Pump",NFF500
"Capacity (Rate of Flow)",50
"If other Rate of Flow Please Specify  in m3/h",48
"Total Head (min.) Corrsponding to Capacity and Speed",50
"Speed in RPM",3600
"Pump Efficiency at Duty point  Corrsponding to Capacity and Speed  ( water delivered / Pump Input )",85
"Power input to pump at Duty Point",13.42
"NET positive suction head(NPSH)",7
Service/Duty,Continuous
"Temperature must be  upto 40 degree",Yes
Location,Outdoor
Casing,"Cast Iron of Grade FG200 of IS 210"
Impeller,"Stainless Steel of Grade 12 Cr13 of IS 6603"
"Casing and Impeller Wearing Ring If provided otherwise put NA",NA
"Shaft :","Stainless Steel"
"Gland packing","Non Asbestor"
"Type :","Air cooled"
"No. of Cylinder:",2
"Blade Material",Aluminium
"Lub. Oil Consumption(g/k Wh):",2
"Sleeve :","Stainless Steel"
Bracket:,Others
"Suction Flange:",Others
"Volute Casing",Others
"Gland Packing set :",Brass
"Delivery Flange:","Mild Steel"
"Rotation: clock wise while facing the flywheel end",Yes
"Complete unit including pump & engine duly coupled along with auto prime system, fuel tank etc shall be mounted on a two wheeled trolley for easy transportability,The trolley shall be equipped with Leaf Springs for Suspension, Support for Rear end and Towing Bar, Parking Breaks etc and The trolley must have minimum ground clearance of 300 mm, below leaf spring.",Yes
"Material of Trolley","MS fabricated"
".Type of pump:","Back pull out"
".Fuel supply:","Fuel pump by gravity feed through tank"
".Starting :",Both
"Suction and Delivery Pipe Dimensions ( mm x mm)","100 mm Suction and 63 mm Delivery"
"Fuel Tank Capacity for  min.24 hours continous running at full load",8.5
"All rotating parts be dynamically balanced for longer bearing life and vibration free smooth and silent operation",Yes
"Supply of Auto prime, horizontal, end suction, centrifugal  type pumping unit capable handling floating material/soft solids like wooden pieces , muddy water, etc.",Yes
"The pump shall be capable of developing required head at rated capacity for continuous outdoor operation.  External conditions like Rain, Snow and humidity should not affect pumping operation.",Yes
"The shut off head of the pump shall not less than 12% of head at rated capacity for 3 cusec and 5 cusec pumps  having 10 mtrs. As duly point head.",Yes
"The pump should be capable of starting without external priming and should  be capable of operation with least human intervention.",Yes
"The pump must have non-overloading characteristics and the prime mover i.e. engine shall not get overloaded in the entire range of operation",Yes
"Engine Capacity",18
"Engine Make","Briggs & Stratton"
"The engine shall be Vertical, inline, diesel engine capable of continuous operation and must be equipped with 12 volt starter and alternator, control panel, wiring harness for panel fuel pipes  and suitable battery.",Yes
"One number suitable size suction strainer and Non Return Value to be supplied with each pump.",Yes
"Diesel engine be closed coupled and mounted on a base plate robust",Yes
"Material of Base Plate on which Engine is Mounted","Mild Steel"
"Make of Engine Control panel",OTHERS
"If Others , Please Specify the Make for Engine Control","Briggs & Stratton"
"Engine Control Panel with Following Items: i. Engine START switch                                                    ii. Engine oil Pressure meter                                    iii. Engine Temperature meter                                   iV. Ampere Meter                           V.Emergency Engine Stop Switch Engine oil Pressure meter                                                      Vi. Engine Hour Meter                                      Vii.Fuel Indication meter                                   Viii. RPM Meter",Yes
"No. of Stages",1
"Dimension of Pump Set ( L x B x H )","660 x 625 x 650"
"Weight of Pump Set","Not more than 90 kg"
"Minimum Submerge",7
"Safety controls to shutdown the engine in the event of low lub oil pressure or high cylinder head temperature in case of air cooled engines",Yes
"Exhaust silencer of Residential type application",Yes
"12 V starting system complete with starter motor, charging alternator and Cutout",Yes
"Standard set of tools consisting of set of 3 spanners ,one screw driver ,one standard plier and one nose plier of appropriate engine size shall be provided to the consignee along with , free of cost for each of Pump Set.",Yes
"Availability of Type Test Report for conformity IS as per IS:10,001latest/IS 11170latest/IS:7347latest forEngines,to IS:11501 latest and IS:9137 latest for pumps and other parameters to specification  from any ILAC/NABL accredited/Central Gov. LAB .",Yes
"Test cetificate No.",BU1370/1051:1115
"Test Report Date","30th Nov 2015"
"Name and address of the Lab  where test Conducted.","BSCIC Certifications Pvt Ltd"
Warranty,1