"Product Catgeory","video conferencing system" "Product Name","avaya scopia xt-5000" "Specification Title","Specification Value" "Video conferencing System","Full HD(1080p)" "Type of Video Conferencing System","All in one MCU based" "Minimum Bandwidth Requied for Specified video quality at Codec/MCU End",11 "Minimum Bandwidth Requied for Specified video quality at End point/far-site end",1 "Supported Video Coding Standards",H.264 "Supported Audio Coding Standards",G.711/G.722 "Supported Live video Feature",60fps "Number of ports on IP in all in one MCU",10 "End point Based Video Conferencing System","P-to-P, (1+3 Multiparty)" "Number of End points",1 "Admin and Authentication Unit",Available "Media Relay Unit",Available "Concurrent video-caling Line",Available "Legacy Inter-Connect Unit",Available "Video Recording and streaming unit",Available "If available, type of USB camera ","USB interface 1080p HD camera with PTZ operation and minimum 3x digital zoom integrated with speaker phone having on-board H.264 encoding with remote control." "If Available, Number of USB Camera ",5 "Desktop and Mobile Clients Licence for End Point",Available "If Provided, Number of Desktop and Mobile Clients Licence for End Point",5 "Operating Temp. Range","3 to 50 Degree C" "Operating Humidity (Rh)","90% %" Warranty,1 "All the Hardware be UL/CE Certified",Yes "UL/CE Certificate Number (furnished to buyer when demandeed)",UL7415-02 "All in one MCU based system features & Specification : (a) MCU support IP connectivity for video. (b) All components of the MCU solution and desktop client software are from the same OEM. (c) Hardware or Software Based MCU capable of delivering the video bridging performance as defined in the specifications. (d) MCU is a low power consumption appliance/ server and have a power on/off switch so that when the MCU is not used it can be switched off. (e) MCU support up to 10/24/50/100 Full HD video ports @ 4 Mbps or more at 1080p or more in Continuous Presence mode and voice activated mode for sending and receiving. (f) MCU support audio ports on IP if required. (g) MCU is IP based and Network management systems and should be external or internal to the system. (h) MCU solution supports 10/24/50/100 or more concurrent calls and 300/500/1000/2000 respectively or more registrants on an external/ internal (Internet/Intranet) server. (i) MCU supports Audio algorithms :(G.711, G.722, or equivalent or better wideband audio coding support 18Khz or more. (OEM certification to be acceptable) (j) MCU support Telnet /USB /RJ45 /ssh (k) MCU support video resolutions (1080p) (l) MCU support Frame rates upto 30fps or more. (m) MCU support control of a conference like adding participants, removing participants, muting participants video and/ or audio, lock a conference. (n) MCU support Far End Camera Control, in voice activated and continuous presence modes. (o)MCU support sending/receiving multiple streams of video and presentation content without losing MCU port capacity. (p) MCU support layout choices of different layouts. (q) MCU configurable to adapt the continuous presence screen layouts to accommodate newly added or dropped participants from the conference, up to 16 participants automatically. (r) MCU provide a complete `conference control' interface browser to support all `in call' management functions with add and drop' manipulation of parties in the call and within screen layouts. (s) MCU provide standards based method of compensating and correcting for packet loss media streams loss. (t) MCU support a configurable text overlay function, wherein the Name, Site Identifier or terminal info is displayable. (u) MCU solution support maximum bandwidth control per endpoint or per groups of endpoints. (v) MCU solution support distributed architecture. (w) MCU solution support real time monitoring. (x) Scheduling support through outlook integration. (y) The solution allow registration of users, endpoints their authentication and providing each a unique ID and presence status for simplified dialing. (z) MCU solution support both Microsoft and Lotus Notes scheduling with email notifications to individual participants. (aa) MCU solution support personal address book. (bb) The conference scheduling application support Dial-in or Dial-out to terminals. (cc) The conference MCU solution support Direct Inward Dial to scheduled meetings. (dd) The network management software of the MCU/bridge provide CDR data and view of current calls. It allows to view all components of the solution and allow them to be maintained and upgrade centrally. (ee) MCU management software is capable to send e-mail notification to all participants using Microsoft outlook and Lotus notes plug in. (ff) Both the MCU management software to be installed on server and appliances. (gg) MCU support Desktop Client Facility at 1080p @ 30fps Tx and Rx from day one. (hh) Dual video feature to be available in desktop. (ii) MCU support multiple conferences with total number of participants equal to number of ports of MCU. (jj) MCU (with 10/24/50/100 ports) is with redundant power supply in same chassis. (kk) The desktop Client downloadable from central server or available on CD/USB. (ll) The desktop client is capable to display the presentation/ data sharing, shared by remote sites. (mm) The desktop client is capable to share presentations, desktop display or documents/application sharing to the participants. (nn) The desktop client support standard USB HD Webcams and echo cancelling mic/speakers. (oo) It support AES 128 bit encryption and support NAT/firewall traversal to connect sites on internet. (pp) The desktop client is capable to run on latest Windows/Mac/Linux platforms along with mobile devices of IOS and Android. (qq) All equipments are in compliance with the requirements of ITU-T Standard related to Video Conferencing. (rr) All the hardware to be CE and /or UL certified. (ss) System to be IPv6 ready from day one. (tt) System uses standards based protocols and the offered system is interoperable with any existing H.323 based video conferencing equipment on all the ports in the video conferencing MCU. All Hardware and Software required to make it interoperable is included in the scope of supply. System is also tropicalized and report available from ILAC/NABL/Govt Lab with all add on if being supplied to buyer as per following requirement (a) Dry Heat Test : For 16 hrs. at a temp. of 55 degree C in accordance with IS:9000/part-3/section-5/1977 (Reaffirmed 2007). (b) Cold Test : For 4 hrs. At a temp. of 0 degree C in accordance with IS:9000/part-2/section-4/1977 (Reaffirmed 2007). (c) Damp Heat Test : For 2 Cycles of 24 h each at a temp. of 40 degree C & 95% RH in accordance with IS:9000/part- 5/section-1/ 1991 (Reaffirmed 2007). After each environmental test and a recovery period of two hours, the video conferencing system has been checked for complete functional parameters, and the results found satisfactory.","In-compliance with the specification" "End Point based System Features & Specification : The End Point is an End Point / Point to Point system/ System upgradable to Multiparty Video conferencing with full high definition camera and codec for simple installation with a TV / Plasma display (TV / Plasma display not included in the scope of supply, however same may be purchased through GeM Portal as per user’s requirements ) suitable for specified bandwidth of IP network through RJ-45 connectivity: (a) Multiparty System is upgradable to 4/6/8 sites Full HD multiparty conference as applicable as per model by using add-on software and/or hardware. (b) System includes camera with 1920 x 1080p (CCD/CMOS/MOS imager), 10X optical zoom,56 deg Field of View at min zoom, +/- 80 deg pan range, +/-10 deg tilt range in order to accept Full HD resolution video. The camera shall be supplied with min. 1.5m cord and connectors. (c) System delivers Full HD video and voice & Full HD content for an overall Full HD experience at specified bandwidth . (d) System is with H.264 / H.264 HP / H.264 AVC/SVC / H.265 video coding support. (OEM Certificate may be furnished to buyer if so demanded). (e) System has G.722 / G.711 /MPEG4/ etc or equivalent wideband audio coding support and suitable for 18 KHz audio or better audio quality. (OEM Certificate may be furnished to buyer if demanded). (f) System supports sharing of Full HD video and graphics content during the video call. (g) System has live resolution of 1920 X 1080 and deliver Full High definition video at 30fps from 2 Mbps onwards. (h) It is possible to see both the near and far site on one Screen thus making most efficient use of a single display area. (i) System is equipped with one or more Omni directional High Definition Microphones as required to cover large conference room. (j) RJ-45, 10/100/1000 Mbps Base-T Ethernet connection. (k) System is with AES encryption video calls. System / MCU has Encryption On and Off capability. (l) Video Codec shall support 16:9 format for supporting LCD/ Plasma display and PAL / NTSC video standard. (m) Operating conditions: 230 + or - 10% volts, 50 Hz. (n) Shall come with easy to use infra-red hand held remote control with operating distance of at least 4.5 m. (o) All equipments are in compliance with the requirements of ITU-T Standard related to Video Conferencing. (p)All the hardware to be CE and /or UL certified. (q) System to be IPv6 ready from day one. (s) System uses standards based protocols and the offered system is interoperable with any existing H.323 based video conferencing equipment. All Hardware and Software required to make it interoperable is included in the scope of supply. Minimum Number of Ports : (a) 2 x DVI or 2 x HDMI or 2 x equivalent HD for Video output. (b) 1 x HDMI or equivalent for Main Camera. (c) 1 x DVI or 1 x HDMI or USB or RGB or VGA for PC connectivity. System is supplied complete with the following components from the same OEM : (a) Codec Full HD (b) Full High Definition Camera (c) At least one Omni Directional Microphones with suitable connectivity (d) Remote Control (e) Data sharing capability using hardware or software (f) All cables necessary for above features System is also tropicalized and report available from ILAC/NABL/Govt Lab with all add on if being supplied to buyer as per following requirement (a) Dry Heat Test : For 16 hrs. at a temp. of 55 degree C in accordance with IS:9000/part-3/section-5/1977 (Reaffirmed 2007). (b) Cold Test : For 4 hrs. At a temp. of 0 degree C in accordance with IS:9000/part-2/section-4/1977 (Reaffirmed 2007). (c) Damp Heat Test : For 2 Cycles of 24 h each at a temp. of 40 degree C & 95% RH in accordance with IS:9000/part- 5/section-1/1991 (Reaffirmed 2007). After each environmental test and a recovery period of two hours, the video conferencing system has been checked for complete functional parameters, and the results found satisfactory.","In-compliance with the specification" "Availability of Test Report to prove confirmity to the specifications (Furnished when demanded by buyer)",Yes "Free installation and commissioning",Included "USB Camera ",Available