"Product Catgeory","signal generator"
"Product Name","6ghz rf vector signal generator - keysight n5172b"
"Specification Title","Specification Value"
Type,"RF Vector Signal Generator"
"Frequency  Range","9 KHz to 6 GHz"
"Frequency Resolution","0,1"
"Ageing Rate for reference frequency (As declared by OEM)","Less than 2"
"Temperature stability for reference frequency","Less than 2"
"SSB Phase Noise at 1GHz,on 20KHz offset (dBc/Hz)","less than -100"
"Harmonics at 3 GHz level at 0 dBm","less than  -30"
"Non Harmonics (>10 KHz carrier offset)","less than -60"
"Non Harmonics (>50 KHz carrier offset)",NA
"Reverse Power Protection","50V DC voltage, 50W- RF Power"
"Minimum Output Level",-120
"Maximum Output Level",+13
"Output Level Resolution","0,1"
"Total Accuracy forall specified Output Level at 25 Degree C in continuous wave mode","± 0.6 dB"
"VSWR on all operating frequencies",1.6
"Memory (Minimum Storage Settings)",1000
"Amplitude Modulation (AM) Operating Modes","Internal & External"
"Minimum Amplitude Modulation Frequency (3 dB), f > 100 KHz","DC or 10Hz"
"Maximum Amplitude Modulation Frequency (3 dB), f > 100 KHz","50 kHz"
"Modulation Depth","0 to 100%"
"Resolution of AM","0.1% of depth"
"AM Distortion at 1 KHz",2%
"Frequency Modulation (FM) Operating Modes","Internal & External"
"Minimum Frequency Modulation Frequency (-3 dB) Standard","DC or 1Hz"
"Maximum Frequency Modulation Frequency (-3 dB) Standard","7 MHz"
"Minimum Frequency Deviation",1MHz
"Maximum Frequency Deviation",40MHz
"Resolution of FM","0.025% of deviation or 1 Hz"
"Setting Error (at AF=1 KHz and 50% max. Deviation) for FM",0.4%
"Phase Modulation",Available
"If Available, Phase Modulation Operatinf Mode","Internal & External"
"Minimum Phase Deviation","1.25 Radians"
"Maximum Phase Deviation","20 Radians"
"Resolution of Phase Modulation",1
"Setting Error (at AF=1 KHz) for Phase Modulation","0.2 percent"
"Internal Modulation Generator For AM/FM/PM","0.1 Hz to 2 MHz with resolution of 0.1 Hz"
"Pulse Modulation",Available
"If Available, Pulse Modulation Operating Modes","Internal & External"
"Rise and Fall Time","< 10 ns (7 ns)"
"On/Off Ratio",">80 dB"
"Minimum Pulse Width","≥ 2 micro second-ALC on and ≥ 20 ns - ALC off"
"Input Level",TTL
"RF Digital Sweep Range and Width","Within instrument frequency range - 9KHz to 6GHz"
"RF Digital Sweep Time Range","100 micro second to 100 second"
"RF Analog sweep",Not-Available
"If Available, RF Analog Sweep Range and Width",NA
"RF Analog Sweep Time Range",NA
"Pulse Generator",Available
"If Available, Pulse Generator Operating Mode","Automatic, externally triggered, external gate mode, single pulse, double pulse, delayed pulse(externally triggered)"
"Pulse Width","20 ns to pulse period –10 ns"
"Pulse Delay","Free run –3.99 to 3.97 micro second, Triggered- 0 to 40 s"
"Pulse Period","30 ns to 42 seconds"
"Vector Modulation",Available
"Internal Base Band Generator Bandwidth","60 MHz and 120 MHz"
"Arbitory waveform memory","32 MSa"
Modulation,"BPSK, QPSK, OQPSK, π/4DQPSK, gray coded and unbalanced QPSK, 8PSK, 16PSK, D8PSK, QAM-4,16,32,64,128,256,1024 and FSK, MSK, ASK"
"Error Vector Magnitude (EVM)",1.2
"Phase Modulator",Not-Available
"If available, Range of Modulating Signal (Wide Mode)",NA
"If available, Range of Modulating Signal (Narrow Mode)",NA
"Interface Available","USB, LAN, GPIB"
"Standard Acessories (To be supplied)","Power Chord, USB Cable, Documentation CD"
"Power Requirements","230 V +/-10% AC, 50 Hz +/- 3%"
"Operating Temperature Range","0 to 55 degree C"
"Operating Humidity (RH)","95% at 40 degree C"
""Availability of Test Reports from Central Govt / NABL approved / ILAC acredited lab to prove conformity to the specification including environmental tests as under :                                1. Dry Heat Test : 45 deg C for 16 hours as per IS:9000/Pt.3/sec.5/1977  (reaffirmed in 2007)  2. Cold test : 0 deg C for 4 hours as per IS:9000/Pt.2/sec.4/1977  (reaffirmed in 2007)  3. Damp Heat Test: 95% RH at 45 deg C, two cycles of 24 hours each  separated by a gap of 4 hours as per IS:9000/Pt.5/sec.  1/1991 (reaffirmed in 2007)  All the functional paramteres are to be verified before and after recovery  period of 1 hours of above environmental test sequence as above. There shall be no deterioration in functional parameters.",Yes
"Test Report No.","NTH (SR)/EL(C )/2013/027D"
"Test Report Date",04/02/2013
"Name of the Lab","NTH Taramani, Chennai"
Warranty,3