1-800-419-3436 / 1-800-102-3436 
Support Desk
×
All the transactions performed on 2.0 is available here. To access Market click "Home".
Keysight Technologies, FieldFox brings bench-level accuracy into the field by delivering precise handheld RF and microwave measurements that agree with benchtop analyzers. FieldFox RF and microwave combination analyzers N991x base function is a cable and antenna analyzer and can be configured to include spectrum and network analysis.Rugged and weather resistant-Meets MIL-PRF-28800F Class 2, Meets IEC/EN 60529 IP53 requirements,Type tested and meets Procedure 1 requirements for operation in explosive environments. MIL-810G, No vents or fans extends instrument reliability and withstands salty, humid environments.Spectrum analyzer provides best amplitude accuracy 0.5 dB, no warm up required. VNAs offer the most accurate calibration technique full 2-port unknown thru. VNAs can test cable and antenna systems without external cal kits-Quick cal/CalReady.Keysight N9913A having frequency from 30KHz to 4GHz for VNA mode,5KHz to 4GHz in Spectrum Analyzer mode.Refer OEM Datasheet for more detail.
| Other Specifications Download Specification | |
|---|---|
| Description Of The Item | Two port vector network analyzers 3GHz |
| Frequency Range | 9 kHz to 3 GHz |
| Aging Rate Of Spectrum Analyzer Frequency: Better Than 1x10-6 /Year | Yes |
| Frequency Counter Resolution(min.) | 1 Hz |
| Frequency Span | 0Hz(zero span),1kHz to 3GHz |
| Spectral Purity:SSB Phase Noise @10KHz Offset Shall Be Less Than -90dBc/Hz At 1GHz | Yes |
| Spectral Purity :Harmonics @ -40 DBm Level Shall Be Less Than Or Equal To -60dBc | Yes |
| Sweep Time @span >or= 1 KHz | NA |
| Sweep Time @span = 0 Hz | 100 micro S to 20 S |
| Resolution Bandwidth (-3dB) | 10 Hz to 3 MHz in steps |
| Video Bandwidth | 10Hz to 1 MHz in steps |
| Amplitude : Max Input Level For Protection | +27 dBm |
| Amplitude : Max Input Level For Measurement | +20 dBm |
| Amplitude :level Measurement Uncertainity | <or=2 dB |
| Average Noise Level Displayed | 300HzRBW,10Hz VBW: |
| Markers | Normal and delta |
| Trigger | Free run, video, External |
| Display | TFT Colour display with provision for three traces |
| Interface | USB and LAN |
| Measurement Features | CN ratio,AM,time domain power measurement,channel power measurement,Phase noise measurement,TOI,OBW |
| Software For Transfer Of Screen Shot/measurement Data To PC | Yes |
| 2-port Vector Network Analyzer Functionality ,for General Purpose Testing Applications In The Field,specially For Cable And Antenna Measurements, Is Available. | Yes |
| Frequency Range For 2port Vector Network Analyzer | 2 MHz to 3 GHz |
| Frequency Resolution (CW ON) For 2port Vector Network Analyzer | 10 Hz |
| Return Loss For 2port Vector Network Analyzer | 0.00 to 60 dB |
| VSWR For 2port Vector Network Analyzer | 1.01 to 10.00 |
| Cable Loss For 2port Vector Network Analyzer | 0.00 to 30.00 dB |
| For 2port Vector Network Analyzer: Calibration With Precision Calibration Components-open, Short, Load Should Be Included To Achieve Directivity > 35 DB | Yes |
| For 2port Vector Network Analyzer: Distance-to-fault In Co-axial Cables Shall Be Possible | Yes |
| Phase Range For 2port Vector Network Analyzer | -180 to +180 degree |
| Phase Resolution For 2port Vector Network Analyzer | 0.01 deg |
| RF Output Port For 2port Vector Network Analyzer | Type N, female, 50Ohm |
| Dynamic Range For 2port Vector Network Analyzer | 60 dB |
| Nominal Port Power Output For 2port Vector Network Analyzer:Hi Power/Lo-Power Selectable(power Levels Corresponding To Hi And Lo Levels Shall Be Indicated By Bidder. | Selectable and Hi-power= + 3 dB at 3 GHz Low-power = -45dBm |
| Measurement Of S11 & S21 And Smith Chart Measurement Shall Be Possible | Yes |
| For 2port Vector Network Analyzer :Vector Voltmeter For Comparision And Verification Of The Phase Of The Phase-matched Cables Shall Be Available | Yes |
| For 2port Vector Network Analyzer:Group Delay Measurement Shall Be Possible.Details To Be Declared | Yes Available |
| Operating Temperature | 5 to 40 degree C & 80 RH 40 degree C |
| Power Requirement | 230 +- 10 VAC, 50Hz |
| Warranty | 3 years |
| OEM Shall Have ISO:14001 Certification For Their Manufacturing Works | yes |
| One Set Of Operation And Maintenance Manual Shall Be Supplied | yes |
| Standard Accessories Shall Be Supplied | yes |
| Availability Of Test Reports From Central Govt/NABL/ILAC Accredited Lab Covering All The Features & Functional Requirements Including Environmental Tests As Per Specifications | yes |
| Test Report No | NTH(SR)/EL(C)/2013/024C |
| Test Report Date | 04/02/2013 |
| Name Of Lab | National Test House |
| Address Of The Lab | NTH Taramani, Chennai |
Price Dekho Price List in india© 2018 GeM All rights reserved.
