Reduced operating costs can be realised through good battery management, utilising rechargeable batteries and battery chargers. Minelabs Intelligent Multi Charger IMC is an ultra fast battery charger that is robust enough to handle field conditions providing a cost effective solution.Minelabs IMC has been designed for global portability and is capable of operating from worldwide power supplies ranging from 100 volts to 240 volts AC mains as well as portable generators self regulating. The IMC will independently charge 8 batteries two sets within 3 hours.The IMC will charge up to eight of the following battery types AA, AAA, C and/or D Cell batteries. The IMC will charge both NiCad and NiMH batteries and will also charge higher capacity batteries.When a battery is inserted into the IMC, after analysing the battery, the IMC will automatically begin rapid charging of the battery. The IMC has voltage and temperature protection, with additional user selectable charging modes..
Other Specifications Download Specification | |
---|---|
Charger Technology | Transformer Based |
Compatibility With Battery Type (User Selectable) | Tubular |
Battery/battery Bank Voltage | 12 Volts |
Capacity Of The Battery To Be Charged(User Selectable) | 4.5 AH AH |
Maximum Charger Output Current | 2.5 Amp Amp |
Number Of Independent Charging Stations | 8 Nos. |
Charging Cut-off Voltage Per 12V Battery | 13.6V Volts |
Input Voltage Range | 100 to 240V VAC |
Efficiency | 100 % |
Ripple (Peak To Peak At Full Load) | 00 millivolts |
Reverse Polarity Protection | Yes |
Short Circuit Protection | Yes |
Over Current Protection | Yes |
AC Surge Protection | with MOV |
Soft Start And Soft Stop Feature Without Inrush Current | Yes |
Over Voltage Cutoff Protection | Yes |
Facility For Charging Deep Discharged Battery Through Pulse Charging. | Yes |
Cut-in Voltage For Charging A Discharged Battery | 10.5V Volts |
Cut-off Voltage For Charging A Discharged Battery | 13.6V Volts |
Not To Charge Battery In Case One Or More Cells Are Internally Short/ Battery Voltage Less Than 10.5V | Yes |
Digital Display Of Output Voltage And Current | Yes |
LED Indication For Charging Status, Charged Condition Status And Reverse Polarity | Yes |
Cabinet Material | CRCA Sheet |
Cabinet Thickness | 6mm mm |
Length Of Charging Cable For Each Station. | 2 M metre |
Size Of Charging Cable For Each Station. | 2 M sq. mm |
Minimum Operating Temperature | -20 Degree Celsius Degree Celsius |
Maximum Operating Temperature | 55 Degree Celsius Degree Celsius |
Availability Of Type Test Report From Central Govt. /NABL/ILAC Accredited Lab. To Prove Conformity To The Specification. | Yes |
Type Test Report No. | ETDC(MH)/T&M/073 |
TTC Report Date | 10.09.2013 |
Name Of Lab | Electronic Test & Devlopment Center Mohali. |
Address Of Lab | B-108 Phase-VIII, Ind Area SAS Nagar Mohali-160071 |