T SHIRT ROUND NECK SHORT SLEEVE DISRUPTIVE PATTERN CAMOUFLAGE PRINT FOR CRPF AND BSF SSB MADE OF 58 PERCENT COTTON AND 42 PERCENT POLYESTER AVAILABLE IN MEDIUM LARGE AND XL SIZE RATE ARE SAME.
Other Specifications Download Specification | |
---|---|
T Shirt Utility | For Men |
Size | Medium |
Width Across Chest | 44 cm |
Length Of T Shirt | 29.5 cm |
Neck Type | Round Neck |
Number Of Buttons In T Shirt With Collor | not applicable |
Sleeve | Half Sleeve |
Sleeve Type | Set in |
Sleeve Length | 9.5 cm |
Material | Blended |
Blend Composition ( In Case Of Blended ) | 52.48 |
Mass Of Material | 205-210 g/ m² |
Count Of Yarn | 24 Ne |
Knitting | Plain ( Single Jersey ) Knitted |
Colour/ Design | As per buyers requirements |
Colourfastness To Washing ( IS/ISO 105-C10, Test- C (3)) | Change in Colour- 4 Staining of Adjacent Fabric- 3-4 |
Colourfastness To Rubbing ( IS 766) | Dry- 4 / Wet- 3 |
Colourfastness To Perspiration ( IS 971 ) | 4 |
Colourfastness To Light ( IS 2454 ) | 5 |
Without Pocket | |
Size And Position Of Pocket ( In Case Of T Shirt With Pocket ) | not applicable |
Neckline Binding | Rib knitted fabric |
Sleeve End Binding | Self material |
Bottom Hem | Self material |
Construction, Composition And Depth Of Rib Knitted Fabric ( In Case Rib Knitted Fabric Is Used For Neckline, Sleeve End And Bottom Binding ) | 1x1 |
Depth Of Hemming/binding ( In Case Self Material Is Used For Neckline, Sleeve End And Bottom Binding | as per requirement |
Side Slit | Without |
Depth Of Side Slit ( In Case Of T Shirt With Side Slit ) | not applicable cm |
Dimensional Stability To Washing, Shrinkage Or Elongation Percentage, Max ( IS 2977), In Lengthwise And Widthwise Direction | -5 |
Spirality, Percentage, Max ( After One Wash ) ( IS/ ISO 16322-1:2005 ) ( Washing As Per ISO 6330-2A At 60 Degree C | +/- 4 |
Pilling Resistant (after 5 Hours Test As Per IS 10971 (Part 1)), Min | 4 |
Label | Tagless |
Logo To Be Printed As Per Buyer's Requirements | Yes |
Availability Of Test Report From NABL/ ILAC Accredited Or Central Government Lab To Prove Conformity Of Products To The Specification. | Yes |
Test Reports To Be Furnished To Buyer On Demand | Yes |
Test Report No. | will be provided if required |
Test Report Date | will be provided if required |
Name Of The Lab | will be provided if required |
Address Of The Lab | will be provided if required |