Android Based Point Of Sale/ Hand Held Terminal - Adhaar Enabled / PCI , EMV Certified, IP 54/ ISO 786 Card Reader/ 5.5 Inches IPS Display 1280x720/ 1GB RAM/ 8GB Internal Storage Expandable To 32GB/ Android/ Quad Core Processor 1.1GHZ/ Onscreen Keypad/ Dual SIM 4G/LTE/3G/2G/ WIFI, BLUETOOTH/ GPS/ Micro USB Port/ Camera - 5MP/ Battery Backup Of 8-10 Hrs/ Debit -Credit Card Reader/ Integrated 2 Inch Thermal Printer/STQC Certified Finger Print Scanner/ Can Drop Test/ Resistance 1.2 Mtr Drop Test On Concrete/ Camera For QR Code Reader/ Magnetic Card Reader/ Smart Card Reader/ Contact Less Card Reader/ CE, EMV 4.3 L1 And L2, PCI, BIS/ Including Mobile Device Management For Managing The Terminal Remotely...
Other Specifications Download Specification | |
---|---|
Display Size | 5.5 Inch |
Display Type | Scratch resistant multi point capacitive touch screen |
Display Resolution | 1280720 Pixels |
Backlight | LED Backlight |
Light Immunity | Clear Visibility and legibility under direct sunlight |
Processor | Quad Core or higher ARM |
Processor Speed | 1.1 GHz |
Operating System | Android 5.1 or higher |
RAM | 1024 MB |
Inbuilt Storage (Flash Memory) | 8 or higher GB |
Storage Expandability Through Micro SD Card | 32 GB |
Integrated QRcode/ Barcode Reader | Available |
Scanning Speed Of QRcode/ Barcode Reader | 1.1 Scans/sec |
Camera (for Reading QRcode/ Barcode) | Available |
Camera Resolution | Minimum 5 Mega Pixel with Flash pixels |
Key Pad | Onscreen Qwerty |
Interface | USB 2.0 or higher |
WI-fi Connectivity | Available |
Bluetooth Connectivity | Available |
GPS Connectivity | Available |
GSM SIM Slot | Available |
No. Of SIM Available | Dual Sim (one SIM mandatorily with 4G other with 4G/3G) GSM Network with GPRS |
SAM Slot | Available |
Built-in Speaker | Available |
In Built Debit /Credit Card Reader | Available |
In Built Debit /Credit Card Reader Specification | Inbuilt IC Card and MSR Card Supported with PCI 4.0 or higher Compliance and EMV (Europay, MasterCard and VISA) L1 & L2 Certification |
In Built Contact Smart Card Reader/Writer | Available |
In Built Contact Smart Card Reader/Writer | Inbuilt Minimum 1 number of contact type smart card reader (SCOSTA Compliant) |
Integrated Printer | Minimum 2 thermal / Dot Matrix Printer integrated with hand held device |
Software Development Kit (SDK) | Appropriate SDK need to be provided along with device |
Inbuilt Finger Print Scanner | Available |
Inbuilt Finger Print Scanner Specification | Aadhaar enabled In-built finger print scanner with latest certification. UIDAI/STQC certified finger print sensor and Scratch resistant sensor surface |
Battery Chemistry | Lithium Ion |
Battery Capacity | 7.4v 2200Mha mAH |
Battery Back Up (Device In Operation While All Function Of Device Active) | Minimum 8 Hour |
Connectivity (presence/absence) Indicator | Available |
Signal Strength Indicator | Available |
Battery Status Indicator | Available |
Accessories To Be Supplied With The Equipment | Supply Carrying case and User manual along with the devices. |
Terminal Management | Device is remotely manageable in secured mode through functionality like MDM |
Certifications Required | CE,BIS |
Environmental Resistance (IP Rating) | Available |
If Available, Environmental Resistance ( IP 54 Or Better) | IP54 |
Drop /Free Fall Test | Drop /Free Fall test in unpacked, switched off and normal handling conditions (Height: 1.2 m , Total No. of falls:2) |
Vibration Test | Vibration Test should be in packed condition, switched off condition (10-150Hz, 0.15mm/2g, 10 sweep , cycles/axes) |
Bump Test | Bump test should be in packed condition, switched off condition. (1000 Bumps, 40g, in vertical position |
Operating Temperature Range | -10 to +50 degree Celsius Degree C |
Operating Humidity | 10 90 noncondensing % |
Dimensions (H X W X L) | 78x120x280 mmxmmxmm |
Weight | 500 gms |
BIS Registration No. Under Compulsory Registration Scheme & Its Validity | R-84000701 |
Availability Of Test Reports From Central Govt / NABL Approved / ILAC Acredited Lab To Prove Conformity To The Specification Including Environmental Tests As Under : (a) Dry Heat : For 16 Hrs. At A Temp. Of 55 Degree C In Accordance With IS:9000/part-3/section-5/1977 (reaffirmed In 2007). (b) Cold Test : For 4 Hrs. At A Temp. Of -10 Degree C In Accordance With IS:9000/part-2/section-4/1977 (reaffirmed In 2007). (c) Damp Heat (Cyclic)Test : For 2 Cycles Of 24 H Each At A Temp. Of 40 Degree C & 95% RH In Accordance With IS:9000/part-5/section-1/ 1991 (reaffirmed In 2007). After Environmental Conditioning Sequence As Above And A Recovery Period Of Two Hours, The Instrument Shall Be Checked For Complete Functional Parameters, Which Should Be With In Limits Including 1:1 Authentication (Test Reports Are To Be Furnished When Demanded By Buyer) | Yes |
Test Report No. | ATCC2/453 |
Test Report Date | 04/09/2017 |
Name Of The Lab | AMIT TEST ANDCALIBRATION CENTER |
Warranty | 3 Year |