1-800-419-3436 / 1-800-102-3436 
Support Desk
×
All the transactions performed on 2.0 is available here. To access Market click "Home".
Signal Generator Synthesized with sweep and burst function / usb interface/ Frequency range of Micro Hz to 25 Mhz with 1 Micro frequency resolution builtin 120 MSAs 10 bit resolution and arbitrary waveform editing function with 4k point memory / dual channel model support with coupling tracking and phase function/ square waveform can adjust the dutycycle from 1 to 99 / support various waveform arbitrary modes/ built in am/pm/fm/fsk and sum modulation /.
| Other Specifications Download Specification | |
|---|---|
| Type | RF Signal Generator |
| Frequency Range | 9 KHz to 1 GHz |
| Frequency Resolution | 0,1 Hz |
| Ageing Rate For Reference Frequency (As Declared By OEM) | Less than 1 PPM/Year |
| Temperature Stability For Reference Frequency | Less than 1 PPM |
| SSB Phase Noise At 1GHz,on 20KHz Offset (dBc/Hz) | less than -95 dBc |
| Harmonics At 3 GHz Level At 0 DBm | less than -30 dBc |
| Non Harmonics (>10 KHz Carrier Offset) | less than -50 dBc |
| Non Harmonics (>50 KHz Carrier Offset) | less than -55 dBc |
| Reverse Power Protection | 5 Watt |
| Minimum Output Level | -105 dBm |
| Maximum Output Level | +5 dBm |
| Output Level Resolution | 0,1 dB |
| Total Accuracy Forall Specified Output Level At 25 Degree C In Continuous Wave Mode | +- 0.1 dB |
| VSWR On All Operating Frequencies | 1 |
| Memory (Minimum Storage Settings) | 11 |
| Amplitude Modulation (AM) Operating Modes | Internal & External |
| Minimum Amplitude Modulation Frequency (3 DB), F > 100 KHz | 3 Hz |
| Maximum Amplitude Modulation Frequency (3 DB), F > 100 KHz | 3 KHz |
| Modulation Depth | 5 % |
| Resolution Of AM | 5 |
| AM Distortion At 1 KHz | 1 |
| Frequency Modulation (FM) Operating Modes | Internal & External |
| Minimum Frequency Modulation Frequency (-3 DB) Standard | 5 |
| Maximum Frequency Modulation Frequency (-3 DB) Standard | 5 |
| Minimum Frequency Deviation | 5 |
| Maximum Frequency Deviation | 5 KHz |
| Resolution Of FM | 1 |
| Setting Error (at AF=1 KHz And 50% Max. Deviation) For FM | 5 |
| Phase Modulation | Not-Available |
| If Available, Phase Modulation Operatinf Mode | Internal & External |
| Minimum Phase Deviation | NA Radians |
| Maximum Phase Deviation | NA Radians |
| Resolution Of Phase Modulation | NA % |
| Setting Error (at AF=1 KHz) For Phase Modulation | NA |
| Internal Modulation Generator For AM/FM/PM | 0.1 |
| Pulse Modulation | Available |
| If Available, Pulse Modulation Operating Modes | Internal & External |
| Rise And Fall Time | 1 ns |
| On/Off Ratio | 80 dB |
| Minimum Pulse Width | 1 ns |
| Input Level | TTL |
| RF Digital Sweep Range And Width | 1 |
| RF Digital Sweep Time Range | 5 |
| RF Analog Sweep | Available |
| If Available, RF Analog Sweep Range And Width | NA |
| RF Analog Sweep Time Range | 30 |
| Pulse Generator | Available |
| If Available, Pulse Generator Operating Mode | Automatic, externally triggered, external gate mode, single pulse, double pulse, delayed pulse(externally triggered) |
| Pulse Width | 30 |
| Pulse Delay | 1 |
| Pulse Period | 1 |
| Vector Modulation | Available |
| Internal Base Band Generator Bandwidth | NA MHz |
| Arbitory Waveform Memory | NA Mega samples |
| Modulation | NA |
| Error Vector Magnitude (EVM) | 1 % |
| Phase Modulator | Not-Available |
| If Available, Range Of Modulating Signal (Wide Mode) | NA |
| If Available, Range Of Modulating Signal (Narrow Mode) | NA |
| Interface Available | USB |
| Standard Acessories (To Be Supplied) | Patch Chords and manual |
| Power Requirements | 230 V +/-10 AC, 50 Hz +/- 3 |
| Operating Temperature Range | 10 to 45 Degree C |
| Operating Humidity (RH) | 85 % |
| "Availability Of Test Reports From Central Govt / NABL Approved / ILAC Acredited Lab To Prove Conformity To The Specification Including Environmental Tests As Under : 1. Dry Heat Test : 45 Deg C For 16 Hours As Per IS:9000/Pt.3/sec.5/1977 (reaffirmed In 2007) 2. Cold Test : 0 Deg C For 4 Hours As Per IS:9000/Pt.2/sec.4/1977 (reaffirmed In 2007) 3. Damp Heat Test: 95% RH At 45 Deg C, Two Cycles Of 24 Hours Each Separated By A Gap Of 4 Hours As Per IS:9000/Pt.5/sec. 1/1991 (reaffirmed In 2007) All The Functional Paramteres Are To Be Verified Before And After Recovery Period Of 1 Hours Of Above Environmental Test Sequence As Above. There Shall Be No Deterioration In Functional Parameters. | Yes |
| Test Report No. | 468 |
| Test Report Date | 23.02.2012 |
| Name Of The Lab | ETDC Indore MP |
| Warranty | 3 Years |
Price Dekho Price List in india© 2018 GeM All rights reserved.
