1-800-419-3436 / 1-800-102-3436 
Support Desk
×
All the transactions performed on 2.0 is available here. To access Market click "Home".
FC.
| Other Specifications Download Specification | |
|---|---|
| Frequency Range | 2 mHz to 3 GHz |
| No. Of Channels | 2 No. |
| Input Connector | BNC & N connector |
| Type Of Input Signal | Burst, AM, FM and Noise Signal etc. |
| Resolution | 10 or better Digit |
| Input Impedance | 1 Mega Ohm |
| Trigger Slope | Positive |
| Display Type | Backlit (LCD Graphics Screen for Menu Control, Numerical Read Output & Status Information. |
| Measurement | Frequency Period, Time, Phase, Volt,Duty Cycle, Pulse, Rise Time |
| Indication | Frequency Level Status Indication (Bar Graph, Histogram) |
| No. Of Digits | Switchable |
| Time Base Type | OCXO |
| Gate Time | 20 ns to 1000 s |
| Single Shot Time Resolution | 100 Pico Sec |
| Calibration | Electronic |
| Aging Rate Per Year (AS Declared By The OEM) | 2 PPM |
| Temperature Stability At 26 Degree C | 0.02 PPM |
| Interface | GPIB & USB |
| Operating Temperature | 50 Degree C |
| Storage Temperature | 0-35 Degree C |
| Short Warm Up Time | 45 Minutes |
| Power Rating | 90 Watt |
| Power Supply | 100 -240 Volt |
| Operating Humidity (RH) | 90 % |
| Safety Certification (Certificate To Be Furnished When Demanded By Buyer) | UL |
| Standard Accessories Supplied With The Equipment | POWER CHORD , MANUAL |
| Dimensions (H X W X L) | 18X40X25 mm x mm x |
| Weight | .6 Kg |
| Availability Of Test Reports From Central Govt / NABL Approved / ILAC Acredited Lab To Prove Conformity To The Specification Including Environmental Tests As Under : (a) Dry Heat : For 16 Hrs. At A Temp. Of 55 Degree C In Accordance With IS:9000/part-3/section-5/1977 (reaffirmed In 2007). (b) Cold Test : For 4 Hrs. At A Temp. Of -20 Degree C In Accordance With IS:9000/part-2/section-4/1977 (reaffirmed In 2007). (c) Damp Heat (Cyclic)Test : For 2 Cycles Of 24 H Each At A Temp. Of 40 Degree C & 95% RH In Accordance With IS:9000/part-5/section-1/ 1991 (reaffirmed In 2007). After Environmental Conditioning Sequence As Above And A Recovery Period Of Two Hours, The Instrument Shall Be Checked For Complete Functional Parameters, Which Should Be With In Limits.(Test Reports Are To Be Furnished When Demanded By Buyer) | Yes |
| Test Report No. | IAS/QMS/B1694 |
| Test Report Date | 24/11/2017 |
| Name Of The Lab | CCPL |
| Warranty | 1 Year |
Price Dekho Price List in india© 2018 GeM All rights reserved.
