Upper- Genuine LeatherSPLITSole- PU -Single Density Lining- Black Skin Fit Inner Lining- Non wovenFitting- Nickel EyeletSteel Toe- YesSteel Mid Sole- Yes APDInsole- better insole Socks- molded socksStitching- Grey /black/Orange 6 PlyCollar- Leather Laces- Flat black /Grey/OrangeWarranty- 6 MonthsColor- BlackSize- 38 to 45Origin- INDIAPackaging- Cartons Branding- Street Cobbler.
Other Specifications Download Specification | |
---|---|
Conforming To Specification For Anti Riot Shoes Approved By MHA Vide Their Letter No-U.II-98(Spec)/2015-16-Prov-(RAF-ARShoe) 86 Dated 21-01-2016. | YES |
Specification For Anti Riot Shoe | https://dgserver.dgsnd.gov.in/rc/46181605.pdf |
Specification Seen And Understood | Yes |
Size (English Sizing System ) | 5 |
Colour | any other colour as per buyers requirement |
Protection Against | protection against fire, sharp objects, stone pelting impact, water, oil, electical shocks, slip, which may come across during riots. |
Mass Per Pair For Size-6 Shall Not Exceed 1500 Gms (with Increase Or Decrease Of 50 Grams For Each Bigger Or Smaller Size Respectively) | YES |
Leg Height For Size-8 Shall Be 170 Mm With Increase Or Decrease Of 4 Mm For Each Bigger Or Smaller Size Respectively) | YES |
Direct Moulded, Cleated Sole Of Neoprene, Nitrile Rubber PVC Blend Or Any Other Suitable Polymer Blend With Anti Slip Design | Yes |
Minimum Thickness Of Sole | 4 mm |
Cleat Height | 4 mm |
Hardness Of Sole | 56 to 64 Shore A |
Upper | Fire Resistat, Water repellent/ resistent, chrome tanned CG smooth upper Leather for Vamp, quarters, counter, toe cap, Tounge and Jug Loop |
Thickness Of Leather For Vamp, Quarters, Couner And Toe Cap | 1.8 to 2.0 mm |
Thickness Of Leather For Tongue And Jug Loop | 1.0 to 1.2 mm |
Vamp Lining | 100 percent non woven sweat absorbing material, 210 GSM (min ) |
Quarter Lining | Nylon non woven, sweat absorbing material, 150 GSM (min ) |
Counter Lining | Suade leather having thickness of 0.9 to 1.1 mm. |
Thermoplastic Stiffner Of 1.8mm Thickness Shall Be Used For Counter | Yes |
Toe Cap Of Any Suitable Material To To Withstand 200 Joules Of Impact. | Yes |
Fire Resistant ( Aramid ) Round Laces , 130 Cm Long | Yes |
Fire Resistant Sewing Thread | Yes |
The Shoe Shall Meet The Basic And Additional Requirements Mentioned In Clause 5.2.3 Of MHA Approved Speciification As Per IS 15298 Part 2. | Yes |
Availability Of Test Report From NABL/ ILAC Accredited Or Central Government Lab To Prove Conformity Of Products To The Specification. | Yes |
Test Report No. | 0000 |
Test Report Date | 0000 |
Name Of The Lab | 0000 |
Address Of The Lab | 0000 |
Test Reports To Be Furnished To Buyer On Demand | Yes |