Mobile iron barrier for traffic police and Army.
Other Specifications Download Specification | |
---|---|
Type | Mobile Barricade- Large of Size 2440x1220x535 mm with +- 5 mm tolerance |
DGS&D Drawing No DGS&D/GE/277/MB-S/00 To 12 And DGS&D/GE/277/MB-L/00 To 12 | YES |
Read DGS&D Drawing And Fully Understood | YES |
Frame | Made of ISI Marked MS pipe , Light Category of NB 40 mm and thickness 2.9 mm conforming to IS 1239(Part 1)-2004 , having 3 Nos Supports on base and Top and 2 Nos Supports on each side |
Movable Dual Lever Of MS On Right Side For Interlocking | YES |
4 Nos Wheels Of Diameter 160 Mm Fitted On The Two Axles Of Size 25x25mm | YES |
Locking Arrangement In The Wheel | YES |
Compliance To DGS&D Drawing | YES |
Length Of Axle | 736 mm for Mobile Barricade -Large |
ISI Marked CRC Sheet Coforming To IS 513/2008 Fitted In The M S Angles And Supported By MS Flat From Back Side In The Centre | YES |
Size Of CRC Sheet | 2338x454 mm with +- 5 mm tolerance for Mobile Barricade -Large |
Thickness Of CRC Sheet | 1.6 mm |
Size Of Back Side Support Of M S Flat In The CRC Sheet | 454x20x5 mm in Mobile Barricade -Large |
Wire Mesh Fabricatin At Upper And Lower Side Of CRC Sheet | Wire Mesh of Square Size 35x35 mm made from M S Wire of diameter 5 mm fabricated in the M S Angle frame and supported by MS Flat all around |
Hut Structure | 380 mm wide and Wire Mesh of Square Size 35x35 mm made from M S Wire of diameter 5 mm fabricated in the M S Angle frame and supported by MS Flat all around |
Hut Top | Two wire Meshes fabricated in the single MS Angle on the top |
Length Of Hut | 2440 mm in Mobile Barricade -Large |
Size Of MS Angle | 25x25x3 mm conforming to Grade E 250 of IS 2062-2011 |
Size Of M S Flat | 20x5mm |
Minimum Weight | 160 Kg of Mobile Barricade -Large |
Reflectors | 12 Nos Plastic reflectors , 6 Nos on each side and 3 Nos in each row of triangular shape of size 150 to 205 mm fitted in the wire mesh |
Finish | Surface treated for rust removal before applying red oxide and then two coats of yellow colour ennamel paint |
Marking | Indenters Name should be written in the Centre of CRC sheet with reflective paint with letter size of 150 mm Height |