Rated Capacity 3 KVA / 2700 Watts Input Voltage Range Load 50 118 295 V 5 V Input Voltage range Load 50 160 295 V 5 V Frequency 40 70 Hz Phase Single Phase with Ground Power Factor 0.99 @ full load Output Voltage Range 208 / 220 / 230 / 240 V AC THD Linear Load 2 Efficiency 85 92 Battery Charge Current 1.5 Amps DC Voltage 72 V6 7.2 AH Battery inside.
Other Specifications Download Specification | |
---|---|
Technology | (a) IGBT based PWM Technology (b) Microprocessor controlled Digital Design (c) Double Conversion True On-line UPS (d) Manufacturer: IS9001 and IS14001 Certifiedand Small 2U height maximizes available space. Rack-mount with user replaceable battery and Add on batteries for extended back-ups |
Overall Efficiency (AC-AC) (in %age) | > 87 Percentage % |
Input Voltage And Range (in Volts) | 230V 50Hz and Range 160 Volt - 280 Volt ( Full Load) and 230 Volt 50Hz and Range 100 Volt - 280 Volt ( Half Load) Volt |
Input Frequency Range (in Hz) | 50-60 Hz Hz |
Input Phase | Single Phase with ground |
Input Power Factor | 0.95 or better |
Output Voltage (in Volt) | 220 Volt AC-230 Volt AC Volt |
Voltage Regulation (in %age) | +/-3 Percentage % |
Frequency (in Hz) | 50 Hz +/- 0.1 Percentage Hz |
Harmonic Distortion (THD) | < 3 Percentage (linear load) % |
Output Waveform | Pure Sine wave |
Crest Factor | 3 ratio 01 |
Output Power Factor | 0.9 or more |
Battery Backup | Minimum 1 hour battery backup ( Minimum VAH 12000) |
Battery Type | Sealed Lead Maintenance Free VRLA type (Lead Calcium SMF batteries NOT acceptable) |
DC Bus Voltage | As per OEM Architecture |
Transfer Time | 0 milli second milli sec |
Battery Enclosure | MS Rack Powder Coated |
Operating Temperature | 0 to 40 Degree C deg.C |
Noise Level | <55 dB at 1 Meter dB |
Alarms And Indications | All necessary alarms and indications essential for performance monitoring of UPS to be incorporated. |
Bypass | Automatic Bypass Switch |
Compatibility | UPS tbe compatible with DG Set supply |
Communication Interface | (a)Standard RS 232 port for software interface (b)Standard SNMP interface support |
Dimension In Mm (Height X Height X Width) | 45.77 x 34.7 x 5.8 mm mm |
Certifications | IS9001 and IS14000 and EN 60950 and EN/IEC 62040-2 and cULus and CE and Federal Communications Commission |
Environnemental Compliance | RoHS 7b Exemption |