1-800-419-3436 / 1-800-102-3436 
Support Desk
×
All the transactions performed on 2.0 is available here. To access Market click "Home".
1. SCREW DRIVERS i. arm dia 5 mm arm length 100 mm, blade 84 mm ii. arm dia 5 mm arm length 150 mm, blade 94 mm iii. arm dia 9.5 mm arm length 300 mm, blade 114 mm 2, TESTER 3. COMBINATION SIDE CUTTING PLIER 200 mm 4. ISI MARKED PRESSURE SENSITIVE ADHESIVE INSULATING TAPE FOR ELECTRICAL PURPOSE 1.8 cm x 9 meter x 0.125 mm 5. TESTING LAMP 6. HAND DRILLING MACHINE 7. END CUTTING NIPPER nominal size 140 mm 8. WIRE STRIPPING PLIER 9. KNIFE blade length 104 cm, cutting edge length 90 mm, handle length 97 mm, thickness of blade 1 mm 10. ISI MARKED SOLDERING IRON 11. ISI MARKED RUBBER GLOVES ELECTRICAL PURPOSE.
| Other Specifications Download Specification | |
|---|---|
| Conforming To Indian Standard | IS 2594 : latest |
| ISI Marking | No |
| CML Number | N/A |
| Type | All Hard Blade (Type A) |
| Type Of Hacksaw Blade | Hand Hacksaw Blades |
| Nominal Length | 250 mm |
| Width | 12.5 mm |
| Thickness | 0.63 mm |
| Pitch | 0.8 mm |
| Number Of Teeth Per 25 Mm Length | 32 Nos |
| Material | High-speed steel shall be according to Designation XT87W6M05Cr4V2 of IS 7291 |
| Hardness (Near To The Tip Of The Tooth Minimum Of 760 HV And Hardness Around The Pin Holes Shall Be 270 To 500 HV) | 350 HV |
| General Requirement | As per IS 2594 : latest |
| Workmanship And Finish | Blades shall be free from burrs, rust, scale, other defects and freedom from distortion requirements |
| Availability Of Test Report From Central Govt./NABL/ILAC Accredited Lab To Prove Conformity To Specification | Yes |
| Test Report Number | 12347 |
| Test Report Date | Cyber Techno Science |
| Name Of The Lab | sadar bazar, bilaspur |
| Address Of The Lab | sadar bazar, bilaspur |
| Test Report Shall Be Furnish To Buyer On Demand | Yes |
Price Dekho Price List in india© 2018 GeM All rights reserved.
