1-800-419-3436 / 1-800-102-3436 
Support Desk
×
All the transactions performed on 2.0 is available here. To access Market click "Home".
All the T series junction boxes are UV-resistant. They are made of a thermoplastic polypropylene plastic with plug-in sealsmade of ethylene vinyl acetate EVA. This plastic is soft, which means that it is malleable. This allows installation ofcables through the 16x M32 8x M40 seals, or the seals can be cut with a knife at the pre-marked points, in order to createan insertion opening for cables or pipes. Alternatively, instead of seals, cable glands can be inserted through the openingsand be countered internally with a locknut.The junction boxes can be mounted on mounting plates in the openings on the floor using steel bolts 3.5 x 9.5.Clear internal dimensions 267x182x110 mmCover with labelling panel and lead-sealed..
| Other Specifications Download Specification | |
|---|---|
| Switch Board Boxes For Instalation Of Modular Type Of Electrical Accessories | With |
| Materail Of Switch Board Boxes | Galvanised Iron Sheet |
| Thickness Of Materail | 1.2 mm |
| Type Of Installtion | Indoor |
| Provision Of Earthing | Yes |
| Holes With Knook Out For The Entry Of Cable On All Sides | Yes |
| Switch Board Box,frame Plate And Cover Plate Shall Be Of Configuration A X B X C Where A-Number Of Rows, B-Number Of Opening, C-size Of Opening I.e. 1M Or 2M (1M Is The Normal Width Of The Switch ) & (2M Is The Normal Width Of 3 Pin Socket As Seen From The Front) | Yes |
| No. Of Modules Which Can Be Accomodated And Configuration Defined As Above ( Ax B X C) | Three module (1 x 1 x 3M) |
| Minimum Size Of The Box | 230×80×50 mmxmmxmm |
| Switch Board Boxes Shall Have Proper Threading For Fixing The Frame Plate And Shall Be Supported With Fixing Screws Made Of NiCr Plated Brass Or Stainless Steel | Yes |
| Matching Frame Plate | With |
| Materail Of The Cover Plate | Polycarbonate Electrical Grade |
| Colour: Matching With The Accessories | White |
| Mirror Finish Surface Of The Cover Plate | Yes |
| Cover Plate Shall Be Clip On Type | Yes |
| Cover Plate Shall Be Snapfit Which Shall Withstand Atleast 5 Operations Of Fixing & Removing Causing No Damage To The Component Nor They Shall Fall Loose | Yes |
| Interchangeability Of The Cover Plate | Yes |
| All The Switch Board Boxes, Frame Plate And Cover Plate Shall Be Indelibly Marked With Manufacturers Name / Trade Mark | Yes |
| Colour Of Frame Plate | Light Grey |
| Matching Cover Plate | With |
| Materail Of The Cover Plate | Polycarbonate Electrical Grade |
Price Dekho Price List in india© 2018 GeM All rights reserved.
