1-800-419-3436 / 1-800-102-3436 
Support Desk
×
All the transactions performed on 2.0 is available here. To access Market click "Home".
Tested according to EN 60998Screwless terminal to connect electrical conductors. The type of conductor can either be flexible,multi-wire or rigid.If rigid conductors are used, an opening of the release lever is not necessary. The conductor canbe plugged into the terminal directly.To extract the conductors, simply open the release lever. The strand can then be easily pulled-out.Nominal cross-section3 x 0.2 - 2.5 mm multi-wire cables / single-wire conductorsRated voltage 450 VRated current 24 AStripping length 9 mm 1 mmInspection opening Phase tester and testing pin max. 2 mm, very easily accessible on the topside of the terminalMax. approved ambient temperature according to EN 60998 85C. Polycarbonate.
| Other Specifications Download Specification | |
|---|---|
| Switch Board Boxes For Instalation Of Modular Type Of Electrical Accessories | With |
| Materail Of Switch Board Boxes | Galvanised Iron Sheet |
| Thickness Of Materail | 1.2 mm |
| Type Of Installtion | Indoor |
| Provision Of Earthing | Yes |
| Holes With Knook Out For The Entry Of Cable On All Sides | Yes |
| Switch Board Box,frame Plate And Cover Plate Shall Be Of Configuration A X B X C Where A-Number Of Rows, B-Number Of Opening, C-size Of Opening I.e. 1M Or 2M (1M Is The Normal Width Of The Switch ) & (2M Is The Normal Width Of 3 Pin Socket As Seen From The Front) | Yes |
| No. Of Modules Which Can Be Accomodated And Configuration Defined As Above ( Ax B X C) | One module (1 x 1 x 1M) |
| Minimum Size Of The Box | 75×75×50 mmxmmxmm |
| Switch Board Boxes Shall Have Proper Threading For Fixing The Frame Plate And Shall Be Supported With Fixing Screws Made Of NiCr Plated Brass Or Stainless Steel | Yes |
| Matching Frame Plate | With |
| Materail Of The Cover Plate | Polycarbonate Electrical Grade |
| Colour: Matching With The Accessories | White |
| Mirror Finish Surface Of The Cover Plate | Yes |
| Cover Plate Shall Be Clip On Type | Yes |
| Cover Plate Shall Be Snapfit Which Shall Withstand Atleast 5 Operations Of Fixing & Removing Causing No Damage To The Component Nor They Shall Fall Loose | Yes |
| Interchangeability Of The Cover Plate | Yes |
| All The Switch Board Boxes, Frame Plate And Cover Plate Shall Be Indelibly Marked With Manufacturers Name / Trade Mark | Yes |
| Colour Of Frame Plate | Transparent |
| Matching Cover Plate | With |
| Materail Of The Cover Plate | Polycarbonate Electrical Grade |
Price Dekho Price List in india© 2018 GeM All rights reserved.
