1-800-419-3436 / 1-800-102-3436 
Support Desk
×
All the transactions performed on 2.0 is available here. To access Market click "Home".
Fixed Compactor Transfer Station Incorporating 2 Fixed Compactor, 3 Containers, 1 Hook Loader With 2 Nos. Traversing Shuttle Trolleys. The Transfer Station Fixed Compactor is suitable for receiving municipal Solid Waste from Small Garbage Tipper/Hand Cart / Tri Cycle Rickshaw, compacting and loading into Roll-on-Roll off containers of 16 Cum Capacity and transportation by hook loader into the dumping ground..
| Other Specifications Download Specification | |
|---|---|
| Chassis Certification ARAI/VRDE/ICAT | Yes |
| Chassis Certification ARAI/VRDE/ICAT No. | AAFN 0225 |
| Form 22 A - For Compliance With Pollution Standards, Safety Standards Of Components And Road Worthiness As Per CMVR Rules. | Yes |
| Availability Of Test Reports For All Critical Components From The Manufacturer Or OEM Of Hydraulic Pumps, Hydraulic Cylinders, Power Takeoff Unit, Electric Motor Etc. Shall Be From Any ILAC /NABL Accredited / Central Govt. Lab. To Be Furnished To Buyers On Demand. | Yes |
| Registration To Local RTO(Regional Transport Office)/RTA(Regional Transport Authority) By Seller | Yes |
| NGT Approval Needs To Be Provided By The Govt. Department | Yes |
| Hydraulic Cylinder And Hydraulic Pump Used Conforming Of ISO/IS Specifications | Yes |
| Welding Of Structure Should Be Conformed To Relevant IS Standards | Yes |
| Chassis Type | Heavy Motor Vehicle with Face Cowl |
| Type Of Fuel | Diesel |
| Chassis Gross Vehicle Weight | 25000 Kg |
| Kerb Weight | 7000 Kg |
| Engine Capacity | 6692.4 cc |
| Pay Load Capacity | 18 Tonne Load |
| Vehicle Emission Compliance | BS-IV |
| Engine BHP@rpm (hp@rpm) | 212 hp@rpm |
| Engine Torque Max@rpm (Engine Torque Max@rpm) | 750 N-M@rpm |
| Maximum Speed Of Vehicle | 80 Kmph |
| No. Of Speed/ Forward Gears | 6 |
| Braking Distance | 5 metre |
| Gradeability Of Vehicle | 23 % |
| Wheel Base | 4880 mm |
| Engine Aspiration System | Turbocharged Intercooler |
| Mount Type | Truck Mounted Unit |
| Fuel Tank Capacity | 350 Litre |
| Power Take Off Unit | Yes |
| Number Of Axles | 3 |
| Number Of Front Tyres | 2 |
| Number Of Rear Tyres | 8 |
| Type Of Hydraulic Pump In Hook Loader | Van type |
| Hydraulic Tank Capacity | 65 Litre |
| Hydraulic Pump Filter | 10 micron |
| Operating Pressure | 140 Bar |
| Arm Cylinder | 2 |
| Jib Cylinder | 1 |
| Container And Boom Locking Cylinder | 1 |
| Jib Cylinder/Slide Cylinder(Double Acting ,Equipped With Counter Balance Valve Hoses,tubes And Fittings | Yes |
| Lifting Hook(with Complete Test Report) | Yes |
| Stablizers At Suitable Location Along The Rear Of Vehicle To Ensure Stability Of The Vehicle During Loading / Unloading | Yes |
| Lifting /Dumping Capacity Of Hook Loader (to Be Checked With Test Report By Buyer) | 18000 Kgs |
| Hook-lift Length | 1800 mm |
| Hooklift Height( From The Bottom Of The Hook Bar) | 1300 mm |
| Dumping Angle | 45 degree |
| Tipping Time | 40 Seconds |
| Refuse Container Volume | 1667 |
| Floor Plate Thickness Of Container | 6 |
| Side Plate Thickness Of Container | 5 |
| Type Of Rollers | Heavy Duty on Rear side |
| Overall Length Of Container | 6000 mm |
| Overall Width Of Container | 2400 mm |
| Overall Height Of Container | 2400 mm |
| Weight Of Container | 3500 Kg |
| Volume Of Charge Chamber Of Fixed Compactor | 1.75 cu.m |
| Operating Pressure Of Fixed Compactor | 180 bar |
| Compaction Thrust Of Fixed Compactor | 340 KN |
| Power Of Electrical Motor Of Fixed Compactor | 7.5 KW |
| Phase Of Power Supply | 3 |
| Capacity Of Hydraulic Operated Bucket | 1800 Liters |
| Floor Thickness Of Charge Box | 8 mm |
| Side Thickness Of Charge Box | 6 mm |
| Charge Box Opening Length | 1580 mm |
| Charge Box Opening Width | 850 mm |
| Cycle Time | 45 Seconds |
| Boost Force | 340 KN |
| Weight Of Fixed Compactor | 7400 Kgs |
| Loading Height | 3800 mm |
| The Hydraulic Container Coupling Consists Of A Pair Of Hydraulically Operated Hook With Lever Which Pulls, Align And Attaches The Container To The Compactor Unit Before Loading The Garbage Into The Container. After The Container Is Loaded The Hydraulic Coupling Releases The Container Which Is Detached From The Compactor Before Lifting By The Hook Loader. | Yes |
| Hydraulic Vertical Container Gate Opening/Closing Mechanism (The Container Opening Is Provided With A Sliding Steel Gate. The Gate Is Lifted By A Hydraulic Vertical Mechanism Before Loading The Garbage Into The Container. After The Container Is Loaded, The Hydraulic Vertical Mechanism Pushes The Container Sliding Gate Downward And Closes The Opening. The Complete Operation Is Controlled By Means Of Push Buttons.) | Yes |
| Number Of Hydraulic Cylinders | 7 |
| Capacity Of Hydraulic Pump | 10 cc/rev |
| Oil Cooler | Oil Cooler completely integrated to the Hydraulic Power Pack. |
| Control System (PLC Based Control Unit Control Panel With Main Switches, Emergency Stop Button, Functional Control For Compaction Unit, Hydraulic Compaction Container Coupling, Hydraulic Vertical Container Gate Opening/Closing Mechanism, Functional Light And 75% Full Warning Indication.) | Yes |
| Minimum Two Numbers Of Guide Plates For Roll-On Roll-off For One Container | Yes |
| Container Shifting System (2 Nos. Electrically Operated Shuttle Car (A And B) Each To Accommodate One Roll On Roll Off Container Moving On Rails. The Empty Containers Are Placed On Both The Shuttle Cars ‘A & B’. One Of The Shuttle Car ‘A’ Is Positioned Opposite To The Compactor And The Garbage Is Compacted Into This Container ’A’. After Container ‘A’ Is Full, It Is Picked Up By The Hook Loader And Transported To The Dumping Ground For Discharge Of Material. The Shuttle Car ‘A’ Is Then Shifted To One Side And The Shuttle Car ‘B’ With Empty Container Is Positioned Opposite To The Compactor And The Garbage Being Received Is Compacted Into The Second Container ‘B’. The Hook Loader After Dumping The Garbage Returns To The Transfer Station And Unload The Empty Container ‘A’ On The Shuttle Car ‘A’ And Picks Up Loaded Container ’B’ From Shuttle Car ‘B’. Thereafter, The Shuttle Car ‘B’ Is Shifted To One Side And The Empty Container On Shuttle Car ‘A’ Is Positioned Opposite To The Compactor For Loading The Garbage. The Above Cycle Is Repeated. The Offered System Shall And This Ensure That While One Container Is Transported To The Dumping Ground For Disposal Of Garbage, The Second Container Is Available For Loading The Garbage.) | Yes |
| Length Of Each Car | 6000 mm |
| Width Of Each Car | 2500 mm |
| Height Of Each Car | 500 mm |
| Number Of Electric Motor Required To Drive Shuttle Car | 4 |
| Individual Power Of Electric Motor With Gear Box For Driving Shuttle Car | 1 HP |
| Length Of Rail On Which Shuttle Car Will Move | 9 metre |
| Length Of Electric Cable | 20 metre |
| Provision Of Lecheate Collection Tray/drainage System | Yes |
| Requirement Of PLC Electronic System For Monitoring The Operational Parameter Of Machine | Yes |
| Safety Device (provision Of Automatic Locks/ Safety Valves) | Yes |
| Warranty Time | 24 Months |
| Warranty Distance | 10000 Km |
| No. Of Free Service | 4 |
| Chassis Make | TATA LPT 2521/48 BSIV |
| Chassis Model Number | TATA LPT 2521/48 BSIV |
| Make Of Hydraulic Cylinders | Wipro/Dantal/Canara or equivalent |
| Make Of Hydraulic Pump | Yuken/Dowty or Equivalent |
| Number Of Shuttle Car | 2 Nos. |
| Test Certificate For Lifting Capactiy /Dumping Capacity/Stability Of Hook Loader From Any ILAC /NABL Accredited / Central Govt. Lab. To Be Furnished To Buyers On Demand. | Yes |
| Material For Container Body (COR-TEN Steel) | CORTEN STEEL |
Price Dekho Price List in india© 2018 GeM All rights reserved.
