1-800-419-3436 / 1-800-102-3436 
Support Desk
×
All the transactions performed on 2.0 is available here. To access Market click "Home".
6 FEET MEDIUM DUTY LATHE MACHINE, 10 CENTER HEIGHT, 11 BED HEIGHT, 75 MM SPINDLE BORE, FLAME HARDENED BED WAYS.NORTON GEAR BOX..
| Other Specifications Download Specification | |
|---|---|
| Lathe Machine Confirming To IS 6893-1988part 1 With Latest Amndmt. | Yes |
| Lathe Machine Confirming To IS 210 :1993 With Latest Amndmt. | Yes |
| Manually Operated Lathe | Yes |
| Geared Mechanism | Yes |
| Distance Between Centers (mm) X Swing Over Bed (mm) | 500 x 300 |
| Type | Standard |
| Distance Between Centres | 1800 mm |
| Swing Over Bed | 300 mm |
| Center Height | 250 mm |
| Swing Over Cross Slide | 50 mm |
| Swing Over Carriage Wing | 30 mm |
| Swing In Gap | 30 mm |
| Width Of Gap In Front | 50 mm |
| Type Of Bed | FLAME HARDENED |
| Length Of Bed | 1800 mm |
| Width Of Bed | 269.5 mm |
| Gap In Bed | 50 mm |
| Rapid Transverse Of Saddle | 1000 mm |
| Rapid Transverse Of Cross Slide | 1000 mm |
| Maximum Feed Force | 50 N |
| Maximum Facing Diameter | 250 mm |
| Maximum Weight Of Workpiece That Can Be Held Between Chuck And Supported By Live Centre | 200 kg |
| Maximum Weight Of Workpiece That Can Be Held Between Chuck And Supported By Dead Centre | 150 kg |
| Torque ,Maximum On Spindle | 200 Nm |
| Type Of Spindle | ROTARY TYPE |
| Size Of Spindle | 50 mm |
| Type Of Spindle Nose | TAPER |
| Taper Bore In Spindle As Per IS 2582-1972 With Latest Amndmt. | 50 |
| Taper Bore In Spindle Sleeve As Per IS1715-1986 With Latest Amndmt. | 50 |
| Bore In Spindle | 75 mm |
| No. Of Spindle Speed In Forward Direction | 1000 |
| No. Of Spindle Speed In Reverse Direction | 1000 |
| Spindle Speed Range In Forward Direction | 100 TO 1000 |
| Spindle Speed Range In Reverse Direction | 100 TO 1000 |
| Type Of Chuck | 3 Jaw Self Centered |
| Diameter Of Chuck ,Maximum | 300 mm |
| Diameter Of Chuck ,Minimum | 75 mm |
| Travel Of Cross Slide | 200 mm |
| Travel Of Top Slide | 150 mm |
| Type Of Tool Holder | ADJUSTABLE |
| Tool Shank Size As Per IS 1983:1958 With Latest Amndmt.(mm X Mm) | 200 |
| Tail Stock Sleeve Diameter | 50 mm |
| Tail Stock Spindle Taper As Per IS 1715:1986 With Latest Amndmt. | 100 |
| Maximum Offset Of Tailstock On Either Side Of Center Line | 50 mm |
| Sleeve Travel Type ( Tail Stock) | Manual |
| Travel Of Sleeve | 1200 mm |
| Lead Screw Diameter | 50 mm |
| Lead Screw Pitch | 2 mm |
| Lead Screw Feed Range ( Longitudnal Mm/min) | 250 |
| Lead Screw Feed Range ( Cross In Mm/min) | 200 |
| Metric Thread Range In Mm | 6 TO 250 |
| British Thread Range In TPI | 2 TO 80 INCH |
| Module Of Thread | 50 mm |
| Diameteral Pitch | 250 mm |
| Rapid Traverse Motor Power In Kw | 10 kw |
| Type Of Cooling | AUTOMATIC |
| Coolant Pump Output As Per IS 2161 :1962 With Latest Amndmt. | 5 kw |
| Coolant Pump Speed In Rev/min | 500 |
| Coolant Pump Discharge At Maximum Working Height As Per IS 2161 :1962 With Latest Amndmt.in L/min | 2 |
| Type Of Lubrication | COOLANT AUTOMATIC FEED |
| Length Of Lathe Machine | 1800 mm |
| Width Of Lathe Machine | 375 mm |
| Height Of Lathe Machine | 1000 mm |
| Weight Of Lathe Machine With Electrical And Standards Accessories | 400 kg |
| Noise Emitted By Machine As Per IS 10998:1984with Latest Amndmt. | 20 dB |
| Mechanical Guarding As Per IS 9474 :1980 With Latest Amndmt. | Yes |
| Colour Of Lathe Machine As Per IS 5 :1978with Latest Amndmt. | LIGHT BLUE |
| In Possession Of Technical Evaluation Report As Per IS :11118 | Yes |
| Lead Screw -Ground Profile& Pitch Accuracy 0.03 Mm Over A Length Of 300 Mm. | Yes |
| Machine Confirming Full Power Cutting Load Test To Full Length Turning Capacity Of Machine | Yes |
| Lubrication System Requirement As Per IS:11118 | Yes |
| Cooling System Requirement As Per IS :11118 | Yes |
| Positioning Accuracy Meets The Minimum Requirement As Per IS:1878 For Cumulative Error | Yes |
| Positioning Accuracy Meets The Minimum Requirement As Per IS:1878 For Repeatibility | Yes |
| Positioning Accuracy Meets The Minimum Requirement As Per IS:1878 For Backlash | Yes |
| Positioning Accuracy Meets The Minimum Requirement As Per IS:1878 For Minimum Possible Requirement | Yes |
| Geometric Accuracy Test Of General Purpose Parallel Lathe Machines As Per IS 1878-1971 With Latest Amndmt. | Yes |
| Geometric Accuracy Test Of Precision Lathe Machines As Per IS 6040-1972 With Latest Amndmt. | Yes |
| Machine Bed & Tail Stock Casting Grade Confirming To FG-260 With Hardness 180-230BHN As Per IS 11118-1997 With Latest Amndmt. | Yes |
| Tailstock Sleeve Case Hardening Steel 15Ni7Cr4M02 ,, Hardened And Ground To A Hardness Of 58-62 HRCas Per IS 1118-1997 With Latest Amndmt. | Yes |
| Head Stock Drive Gears Confirming To Alloy Steel Material Specification 15 Ni 7 Cr 4 M02 , Hardened 58-62 HRC And Profile Ground With 0.8 Micron Surface Roughness Ra Value | Yes |
| Main Spindle Confirming To C2R Grade Forged Steel And Hardened 58-62 HRC. / Ground With 0.8 Micron Surface Roughness Ra Value | Yes |
| Main Spindle Bearing Confirming Pre-loaded GAMET/TIMKEN Make Spindle Bearing High Precision Class Double Row Taper Roller Bearings At Front & Single Row Taper Roller Bearing At Back | Yes |
| Machine Confirming Dynamically Balanced Spindle And Other Parts Rotating With Peripheral Speed Of More Than 3m/sec | Yes |
| Spindle Forward/Reverse Drive Transmission Through Hydraulic Friction Clutch | Yes |
| "Electric Equipment I.e. Motor And Control Gear Suitable For Operation On 415 V, 3 Phase, 50 Hz., 4 Wire, A.C.supply With Suitable Ammeter " | Yes |
| DRIVING PLATE WITH PEG | Yes |
| Coolant Equipment & Swarf Tray | Yes |
| SPLASH GAURD : | Yes |
| SPINDLE REDUCTION SLEEVE: | Yes |
| 60Deg.DEAD CENTRE-2 Nos.: | Yes |
| ROTATING CENTE-1Nos.: | Yes |
| QUICK CHANGE TOOL POST WITH TOOL HOLDERS | Yes |
| QUICK INDEXIBLE SQUARE TOOL POST | Yes |
| SET OPERTING INSTRUCTION MANUAL& A SET OF OPERATING TOOLS. | Yes |
| 3Jaw Self Centring Chuck | Yes |
| Precision 3 Jaw Self Centring Chuck ( Hydraulic /Pneumatic Complete Chuck ) | No |
| Chuck Gurad | Yes |
| Rear Tool Post | Yes |
| Universal Face Plate | Yes |
| Precision Face Plate | Yes |
| Cast Iron Face Plate | Yes |
| Collet Chuck & Collets. | Yes |
| Rear Tool Holder. | Yes |
| Steady Rest. | Yes |
| Roller Steady Rest | Yes |
| Follow Rest | Yes |
| Longitudinal Stop. | Yes |
| Roller Stop. | Yes |
| Taper Turning Attachment. | Yes |
| A Set Of Change Gear For DP Threads. | Yes |
| Multi Copying Attachment | Yes |
| Machine Lamp | Yes |
| Swraf Tray Complete With Coolant Equipment | Yes |
| Four Jaw Chuck | Yes |
| Availability Of Drawing For Foundation | Yes |
| Warranty | 1 Years |
| Annual Maintenance Contract For Machine | Yes |
| Period Of AMC | 0 Years |
| Availability Of Test Report From Central Govt./NABL/ILAC Acredited Lab To Prove Confirmity To Specification | Yes |
| Test Report No. | AA/YUG/7865455 |
| Test Report Date | 01/03/2015 |
| Name Of The Lab | PARTH LAB, MIDC NAGPUR |
| Address Of The Lab | B 16 MIDC NAGPUR |
| Purpose Classification | General Purpose |
| Lathe Machine Type | Center Lathe |
| Main Motor Power ( For Light Duty Lathe ≥ 3kw,For High Speed Precision Lathe ≥ 11kw, For Heavy Duty Lathe ≥ 18kw) | 11 kw |
| Erection And Commisioning Charges Included In Offered Prices Without Foundation | Yes |
| Spindle Forward/Reverse Drive Transmission Through Electro Magnetic Double Clutch | Yes |
| Nature Of Duty Of Operation Of Lathe | Light Duty Lathe |
Price Dekho Price List in india© 2018 GeM All rights reserved.
