1-800-419-3436 / 1-800-102-3436 
Support Desk
×
All the transactions performed on 2.0 is available here. To access Market click "Home".
Consists of one voltmeter of 10 Volt, one ammeter of250mA range. Two 4mm socket terminals shall be provided for the connection of unknown resistance another two terminals for D.C. supply. An on/off switch and a potentiometer of 25 ohms, 3 watt is also provided. The whole system is enclosed in a superior quality plastic box. Supplied without resistance coil and D.C. supply.
| Other Specifications Download Specification | |
|---|---|
| DC Voltage Output Rating | 0 to 30 Volt |
| DC Current Output Rating | 0 to 4 Ampere |
| Maximum Power | 120 Watt |
| Load Regulation (Voltage) ± (% Of Output + Offset) | less than 0.01 + 2 mV |
| Load Regulation (Current) ± (% Of Output + Offset) | less than 0.05 + 1.5 mA |
| Line Regulation (Voltage) ± (% Of Output + Offset) | less than 0.01 + 1 mV |
| Line Regulation (Current) ± (% Of Output + Offset) | less than 0.05 + 0.1 mA |
| Over Voltage Protection Accuracy | +- 0.5 + 0.5 V |
| Over Voltage Protection Response Time | less than 10 milli sec |
| Ripple And Noise Voltage (20 Hz To 20 MHz) | less than 1 mVrms less than 4 mVpp |
| Ripple And Noise Current (20 Hz To 20 MHz) | less than 4 mArms |
| Readback Voltage Accuracy | 0.05 + 10 mV |
| Readback Current Accuracy | 0.15 + 4 mA |
| Readback Voltage Resolution | 1 mV |
| Readback Current Resolution | 0.1 mA |
| Operating Temperature | N/A Degree C |
| Gperating Humidity (RH) | N/A % |
| PC Interface | USB |
| Dimensions | N/A mm x mm x |
| Weight | GPIB gms |
| Availability Of Test Reports From Central Govt / NABL Approved / ILAC Acredited Lab To Prove Conformity To The Specification Including Environmental Tests As Under : (a) Dry Heat : For 16 Hrs. At A Temp. Of 55 Degree C In Accordance With IS:9000/part-3/section-5/1977 (reaffirmed In 2007). (b) Cold Test : For 4 Hrs. At A Temp. Of -20 Degree C In Accordance With IS:9000/part-2/section-4/1977 (reaffirmed In 2007). (c) Damp Heat (Cyclic)Test : For 2 Cycles Of 24 H Each At A Temp. Of 40 Degree C & 95% RH In Accordance With IS:9000/part-5/section-1/ 1991 (reaffirmed In 2007). After Environmental Conditioning Sequence As Above And A Recovery Period Of Two Hours, The Instrument Shall Be Checked For Complete Functional Parameters, Which Should Be With In Limits.(Test Reports Are To Be Furnished When Demanded By Buyer) | Yes |
| Test Report No. | N/A |
| Test Report Date | N/A |
| Name Of The Lab | N/A |
| Warranty | 1 Year |
Price Dekho Price List in india© 2018 GeM All rights reserved.
