MODULAR WORKSTATIONS 45 MM THICK SPECIFICATION PARTITION PANEL CONSISTING OF FRAME MADE OF 1.0MM THICK ALUMINUM OF 45 MM THICKNESS AND WOULD BE FINISHED BY ALUMINUM ALLOY EXTRUSIONS. FURTHER THE FRAME WORK SHOULD CONSIST OF AN INFILL STRUCTURE OF BATTEN, PARTICLE BOARD AS REQUIRED. THE OUTER LAYERS SHALL BE MADE OF PPB, BOTTOM PANEL & FABRIC FOR TOP PANEL. THIS SHALL BE ATTACHED TO TOP PANEL BY MEANS OF SELF-TAPPING SCREWS. ALL STEEL PARTS SHALL BE PRETREATED FOR SEVEN STAGE ANTI-CORROSION TREATMENTS FOLLOWED BY EPOXY POWDER COATING. HEIGHT OF SKIRTING WILL BE 150MM. ONE INTERMEDIATE RACEWAY IS TO BE PROVIDED BELOW OR ABOVE THE WORKTOP. PARTITION TO BE SUPPORTED BY STABILITY BRACKETS WHEREVER REQUIRED. WORKSTATION CONSISTS OF WORK SURFACE OF 25MM THICK PRE LAMINATED BOARD HAVING PVC EDGE LIPPING OF 2MM THICK ON ALL EXPOSED EDGES AND 0.8MM ON ALL BUTT EDGES & PRESSED AT 200 DEG C WITH HOT MELT GLUE ON EDGE BANDING MACHINES. THE WORKSTATION SHOULD HAVE A KEYBOARD OF SIZE 600MM X 300MM MADE OF 18MM THICK POST LAMINATED BLOCK BOARD, AS WELL AS A CPU TROLLEY MADE OF MS 1MM THICK SHEET DULY POWDER COATED IN THE DESIRED SHADE. A THREE DRAWER PEDESTAL OF SIZE 700MM (H) X 400MM(W) X 450MM(D) MADE OF 18MM THICK PRE LAMINATED BOARD IN THE DESIRED SHADE. FIRST TWO DRAWERS ARE 150MM AND THE BOTTOM WILL BE OF 300MM IN SIZE WITH PROPER PROVISION OF GOOD QUALITY LOCKS AND SS HANDLES. KEY BOARD TRAY WITH TELESCOPIC SLIDES (NYLON ROLLER SLIDES) OF SIZE 600X350 MM MADE OUT OF 18 MM THICK PRE LAMINATED PARTICLE BOARD IN WORK STATIONS..

• Availability: 100 In Stock
• Min. Qty. Per Consignee: 1

• Product Id: 16779
• Sold by: 1 Seller(s)

• Frame Type - Free Standing
• System of Paneling - Tile based
• Number of seats in workstation - 4 Nos.
• Width of Table Top - 400 mm
• Material of Board of Workstation - Particle Board