1-800-419-3436 / 1-800-102-3436 
Support Desk
×
All the transactions performed on 2.0 is available here. To access Market click "Home".
The Pump used for dewatering and firefighting operations either for direct firefighting operations or to obtain water supplies from an open source for filling relaying or de-watering in flooding situations.It should be self containing engine driven unit and uses unleaded petrol .It should be capable of being carried by two men and weighs not more than 90 kgs dry weight including battery.
| Other Specifications Download Specification | |
|---|---|
| Indian Standrad For Code Of Acceptance Tests For Centrifugal, Mixed Flow And Axial Pumps. | IS:9137 latest Amendment |
| ISI Marked | No |
| CM/L No. And Date (If Yes) , Otherwise Put NA | NA |
| Make Of Pump | Phoenix |
| Model No. Of Pump | Millennium 800 |
| Capacity (Rate Of Flow) | 50 m³/hr |
| If Other Rate Of Flow Please Specify In M3/h | 48 m3/h |
| Total Head (min.) Corrsponding To Capacity And Speed | 60 metres |
| Speed In RPM | 3600 rpm |
| Pump Efficiency At Duty Point Corrsponding To Capacity And Speed ( Water Delivered / Pump Input ) | 650 % |
| Power Input To Pump At Duty Point | 17 Kilowatt |
| NET Positive Suction Head(NPSH) | 6 metre |
| Service/Duty | Continuous |
| Temperature Must Be Upto 40 Degree | Yes |
| Location | Outdoor |
| Casing | Cast Iron of Grade FG200 of IS 210 |
| Impeller | Stainless Steel of Grade 12 Cr13 of IS 6603 |
| Casing And Impeller Wearing Ring If Provided Otherwise Put NA | NA |
| Shaft : | Stainless Steel |
| Gland Packing | Non Asbestor |
| Type : | Air cooled |
| No. Of Cylinder: | 1 No |
| Blade Material | Aluminium |
| Lub. Oil Consumption(g/k Wh): | 2 (g/k Wh) |
| Sleeve : | Stainless Steel |
| Bracket: | Others |
| Suction Flange: | Others |
| Volute Casing | Others |
| Gland Packing Set : | Brass |
| Delivery Flange: | Mild Steel |
| Rotation: Clock Wise While Facing The Flywheel End | Yes |
| Complete Unit Including Pump & Engine Duly Coupled Along With Auto Prime System, Fuel Tank Etc Shall Be Mounted On A Two Wheeled Trolley For Easy Transportability,The Trolley Shall Be Equipped With Leaf Springs For Suspension, Support For Rear End And Towing Bar, Parking Breaks Etc And The Trolley Must Have Minimum Ground Clearance Of 300 Mm, Below Leaf Spring. | Yes |
| Material Of Trolley | MS fabricated |
| .Type Of Pump: | Back pull out |
| .Fuel Supply: | Fuel pump by gravity feed through tank |
| .Starting : | Both |
| Suction And Delivery Pipe Dimensions ( Mm X Mm) | 100 mmXmm |
| Fuel Tank Capacity For Min.24 Hours Continous Running At Full Load | 9 litres |
| All Rotating Parts Be Dynamically Balanced For Longer Bearing Life And Vibration Free Smooth And Silent Operation | Yes |
| Supply Of Auto Prime, Horizontal, End Suction, Centrifugal Type Pumping Unit Capable Handling Floating Material/soft Solids Like Wooden Pieces , Muddy Water, Etc. | Yes |
| The Pump Shall Be Capable Of Developing Required Head At Rated Capacity For Continuous Outdoor Operation. External Conditions Like Rain, Snow And Humidity Should Not Affect Pumping Operation. | Yes |
| The Shut Off Head Of The Pump Shall Not Less Than 12% Of Head At Rated Capacity For 3 Cusec And 5 Cusec Pumps Having 10 Mtrs. As Duly Point Head. | Yes |
| The Pump Should Be Capable Of Starting Without External Priming And Should Be Capable Of Operation With Least Human Intervention. | Yes |
| The Pump Must Have Non-overloading Characteristics And The Prime Mover I.e. Engine Shall Not Get Overloaded In The Entire Range Of Operation | Yes |
| Engine Capacity | 23 HP |
| Engine Make | Briggs & Stratton |
| The Engine Shall Be Vertical, Inline, Diesel Engine Capable Of Continuous Operation And Must Be Equipped With 12 Volt Starter And Alternator, Control Panel, Wiring Harness For Panel Fuel Pipes And Suitable Battery. | Yes |
| One Number Suitable Size Suction Strainer And Non Return Value To Be Supplied With Each Pump. | Yes |
| Diesel Engine Be Closed Coupled And Mounted On A Base Plate Robust | Yes |
| Material Of Base Plate On Which Engine Is Mounted | Mild Steel |
| Make Of Engine Control Panel | OTHERS |
| If Others , Please Specify The Make For Engine Control | M800 |
| Engine Control Panel With Following Items: I. Engine START Switch Ii. Engine Oil Pressure Meter Iii. Engine Temperature Meter IV. Ampere Meter V.Emergency Engine Stop Switch Engine Oil Pressure Meter Vi. Engine Hour Meter Vii.Fuel Indication Meter Viii. RPM Meter | Yes |
| No. Of Stages | 1 |
| Dimension Of Pump Set ( L X B X H ) | 600x500x630 mm mmXmmXmm |
| Weight Of Pump Set | 95 kg Kg |
| Minimum Submerge | 6 metres |
| Safety Controls To Shutdown The Engine In The Event Of Low Lub Oil Pressure Or High Cylinder Head Temperature In Case Of Air Cooled Engines | Yes |
| Exhaust Silencer Of Residential Type Application | Yes |
| 12 V Starting System Complete With Starter Motor, Charging Alternator And Cutout | Yes |
| Standard Set Of Tools Consisting Of Set Of 3 Spanners ,one Screw Driver ,one Standard Plier And One Nose Plier Of Appropriate Engine Size Shall Be Provided To The Consignee Along With , Free Of Cost For Each Of Pump Set. | Yes |
| Availability Of Type Test Report For Conformity IS As Per IS:10,001latest/IS 11170latest/IS:7347latest ForEngines,to IS:11501 Latest And IS:9137 Latest For Pumps And Other Parameters To Specification From Any ILAC/NABL Accredited/Central Gov. LAB . | Yes |
| Test Cetificate No. | yes |
| Test Report Date | yes |
| Name And Address Of The Lab Where Test Conducted. | yes |
| Warranty | 1 |
Price Dekho Price List in india© 2018 GeM All rights reserved.
