1-800-419-3436 / 1-800-102-3436 
Support Desk
×
All the transactions performed on 2.0 is available here. To access Market click "Home".
drilling machine In drilling machine.
| Other Specifications Download Specification | |
|---|---|
| Confirmity To Standards For Purcahse Specification For Machine Tools , Part 6 Bench /Pillar Type Drill Machine | IS : 6893-6 (1985) with latest amndmt. |
| Type Of Drill Machine | Pillar |
| Drive | Gear Drive |
| Colour Of The Driiling Machine As Per IS :5:2004 With Latest Amndmnt. | NA |
| Drilling Capacity In Steel Having 600 Mpa Tensile Strength | 32 mm |
| If Others , Please Specify The Drilling Capacity In Steel Having 600 Mpa Tensile Strength | NA mm |
| Drilling Capacity In Cast Iron | NA mm |
| Tapping Capacity In Steel Having 600 Mpa Tensile Strength | NA mm |
| Tapping Capacity In Others Materials | 0 mm |
| Cutting Speed | NA m per min |
| Feed | NA mm per rev |
| Type Of Machine Vice | Push Type |
| Machine Vice Arrangement | Fixed Base |
| Normal Size Of Machine Vice | 80 mm |
| If Other Size Of Machine Vice Please Declare | 0 mm |
| Maximum Drilling Radius | 1 mm |
| Distance Between Work Table And Spindle , Max As Per IS :7764 With Latest Amdmnt. | 1 mm |
| Distance Between Spindle And Base Plate , Max As Per IS :7764 With Latest Amdmnt. | 1 mm |
| Distance Between Centre Of Spindle & Pillar Front | 1 mm |
| Type Of Work Table | Rectangular |
| Clamping Area | NA mm x mm |
| Nominal Size Of T Slots As Per IS 2013-1985 With Latest Amndmt. | 1 mm |
| Spacing Of T Slots | 1 mm |
| Maximum Weight Of The Job ( Including Fixture ) That Can Be Loaded On The Work Table | 1 kg |
| Spindle Travel | Automatic |
| Taper In Spindle Bore As Per IS 1715:2002 | NA mm |
| Range Of Spindle Speed (i.e. 640-1040-1600-2280) | NA rev/ min |
| No. Of Feed | NA mm per min |
| Clamping Range | 1 mm |
| Travel Of Rail ( Vertical) | NA mm/min |
| Travel Of Drilling Head ( Horizontal) | NA mm/min |
| Type Of Lubrication | NA |
| Weight Of Drill Machine With Electrical And Standards Accessories | 1 kg |
| Floor Space Required ( Length X Width ) | NA mm x mm |
| Piller Length , If Not Put 0 (in Case Of Bench Type Drill Machine) | 1 mm |
| Pillar Diameter If Not Put 0 (in Case Of Bench Type Drill Machine) | 1 mm |
| Geometric And Practical Drilling Machine Accuracy As Per IS 2425 & IS 2426 With Latest Amndmnt. | Yes |
| List Of Standards Accessories Including Motor Pulley, Drill Drift Etc. | NA |
| List Of Optional Accessories | NA |
| Motor Output | 0.5 hP |
| If Others Motor Output Please Specify | NA hP |
| Power Supply ( V, Ph, Hz ) | 220 VOLT |
| Make Of Motor | NA |
| Frame Size And Mounting For Motor As Per IS : 1231:1974 With Latests Amndmt. | Yes |
| Auxiliary Motor | yes |
| If Yes Auxiliary Motor Output, Voltage, Phase, Frequency And Make ,otherwise Put NA | 50 HZ 220 VOLT |
| Output Of Coolant Pump | 0.5 Kw |
| Speed Of Coolant Pump | na rev /min |
| Discharge Of Pump At Max Working Height | NA l per min |
| Noise Emitted By Machine | 1 dB |
| Mechanical Gurading As Per IS : 9474-1980 With Latest Amndmnt. | Yes |
| Angle Of Drilling Head Rotation | NA degree |
| Angle Of Drilling Head Swivel From Horizontal Upwards And Downwards | NA degree |
| Size Of Box Table (mm X Mm X Mm) | NA mm3 |
| Size Of Universal Table ( Mm X Mm X Mm) | NA mm3 |
| Availability Of Test Report As Per IS : 6893-6 (1985) Used For Purcahse Specification For Machine Tools , Part 6 Bench /Pillar Type Drill Machine With Latest Amndmt.from Central Govt./NABL/ILAC Acredited Lab To Prove Confirmity To Specification | Yes |
| Test Report No. | NA |
| Test Report Date | NA |
| Name Of The Lab | NA |
| Address Of The Lab | NA |
Price Dekho Price List in india© 2018 GeM All rights reserved.
