× All the transactions performed on 2.0 is available here. To access Market click "Home".

hand held device for e challan (sisl)(SISL SM-T116IR)

` 59,750.00

  • MRP: `80000.00

Hand Held Device for E Challan with Biometrics, thermal printer, Bluetooth, battery, power management and charger.

  • Availability: 100 In Stock
  • Min. Qty. Per Consignee: 10
  • Display Type - Scratch resistant multi point capacitive touch screen
  • Display Resolution - 1024X600 Pixels
  • Processor - Dual Core or higher ARM
  • Operating System - Android 5.1 or higher
  • Storage Expandability through Micro SD Card - 32 GB
Other Specifications Download Specification
Display Size 7 inch mm
Display Type Scratch resistant multi point capacitive touch screen
Display Resolution 1024X600 Pixels
Processor Dual Core or higher ARM
Processor Speed 1 GHz
Operating System Android 5.1 or higher
RAM 1024 MB
Inbuilt Storage (Flash Memory) 8 or higher GB
Storage Expandability Through Micro SD Card 32 GB
Integrated QRcode/ Barcode Reader Not Available
If Available, Scanning Speed NA Scans/sec
Camera (for Reading QRcode/ Barcode) Available
If Available, Camera Resolution Minimum 5 Mega Pixel
Key Pad Soft in case of Touch Screen
Interface USB 2.0 or higher
WI-fi Connectivity Available
Bluetooth Connectivity Available
GPS Connectivity Available
GSM SIM Slot Available
SAM Slot Not Available
Built-in Speaker Available
Battery Chemistry Li battery
Battery Capacity 3600 mAH
Battery Back Up (Device In Operation While All Function Of Device Active) Minimum 6 Hours
Connectivity (presence/absence) Indicator Available
Signal Strength Indicator Available
Battery Status Indicator Available
Accessories To Be Supplied With The Equipment NA
Terminal Management Device is remotely manageable in secured mode for Software/Patches updation through available communication
Certification Available BIS
Drop /Free Fall Test Drop /Free Fall test in unpacked, switched off and normal handling conditions (Height: 1 m , Total No. of falls:2)
Vibration Test Vibration Test should be in packed condition, switched off condition (10-150Hz, 0.15mm/2g, 10 sweep , cycles/axes)
Bump Test Bump test should be in packed condition, switched off condition. (1000 Bumps, 40g, in vertical position
Dimensions (H X W X L) 193.4x116.4x9.7mm mm x mm x
Weight 327 gms
BIS Registration No. Under Compulsory Registration Scheme & Its Validity BIS
Availability Of Test Reports From Central Govt / NABL Approved / ILAC Acredited Lab To Prove Conformity To The Specification Including Environmental Tests As Under : (a) Dry Heat : For 16 Hrs. At A Temp. Of 55 Degree C In Accordance With IS:9000/part-3/section-5/1977 (reaffirmed In 2007). (b) Cold Test : For 4 Hrs. At A Temp. Of -10 Degree C In Accordance With IS:9000/part-2/section-4/1977 (reaffirmed In 2007). (c) Damp Heat (Cyclic)Test : For 2 Cycles Of 24 H Each At A Temp. Of 40 Degree C & 95% RH In Accordance With IS:9000/part-5/section-1/ 1991 (reaffirmed In 2007). After Environmental Conditioning Sequence As Above And A Recovery Period Of Two Hours, The Instrument Shall Be Checked For Complete Functional Parameters, Which Should Be With In Limits Including 1:1 Authentication (Test Reports Are To Be Furnished When Demanded By Buyer) Yes
Test Report No. can be provime at time of inspection
Test Report Date can be provime at time of inspection
Name Of The Lab can be provime at time of inspection
Warranty 1 Year

Price Dekho Price Dekho Price List in india