DEFENCE-Eicher - Pro 1075 E WTank 3.5 KL RHD BS4 NGB-Non Potable.
Other Specifications Download Specification | |
---|---|
Engine Capacity | 3298 cc |
Water Tanker Capacity | 3000 Litres |
Vehicle Certification ARAI/VRDE/ICAT No. | AALN 0307 |
Make Of Chassis | SAPH 45 |
Chassis Model No. | Eicher PRO 1075 |
Category Of Vehicle For Which Chassis To Be Used | Light Capacity Commercial Vehicles |
Body Style | Water Tanker on Cabin Chassis |
Body Options | Fixed Side Deck |
Type Of Fuel | Diesel |
Vehicle Emission Compliance | BS-IV |
Vehicle Mileage ( Declared By OEM As Certified By Test Agency Under Rule 115of CMVR 1989) | 9.09 Km/Ltr |
Speed, Max | 80 Km/Hr |
Engine Power BHP@rpm | 107HP@2600RPM BHP@rpm |
Engine Torque Max,@ Rpm | 350Nm @ 1200 - 1800RPM N-M@rpm |
Engine Aspiration | Turbocharged |
No. Of Cylinder In Engine | 4 Nos |
Fuel Tank Capacity | 100 Litres |
Length Of Chassis | 5987 mm |
Width Of Chassis | 2035 mm |
Height Of Chassis | 2380 mm |
Gradeability Of Chassis( %) | 33 % |
Ground Clearance | 210 mm |
Wheel Base | 3515 mm |
Kerb Weight | 2980 Kg |
Gross Vehicle Weight | 7450 Kg |
No Of Axle | 2 Nos |
Axle Configuration ( No. Of Outside Tyre X No. Of Driving Tyre) | 4X2 |
Type Of Front Axle And Suspension System | Reverse Elliot I section Front axle Semi-elliptical laminated leaf springs, with shock absorber" |
Type Of Rear Axle And Suspension System | Fully floated banjo type Rear Axle Semi-elliptical laminated leaf springs, with optional shock absorber" |
BIS Marked Pneumatic Tyres And Tubes For Both Front And Rear | Yes |
Size Of Front Tyres | 7.50x16 - 16PR |
Size Of Rear Tyres | 7.50x16 - 16PR |
Size Of Wheel | 6Gx16 |
Chassis Transmission System | Manual |
No. Of Speed/ Forward Gears | 5 |
Type Of Steering | Manual |
Turning Radius | 6500 mm |
Speed Governers With Valid Certification | No |
ABS Fitted | No |
Front Vehicle Brake | Drum |
Rear Vehicle Brake | Drum |
Type Of Clutch | Single Dry Plate |
Side View Mirror | Yes |
Low Fuel Warning Light | Yes |
Fog Lights | No |
Standard Sparewheel And Tool Kit | Yes |
Constructional Details Of Cabin Truck With Water Tank : Seating Capacity(in The Cabin) | 1+2 |
Seating Capacity Layout With Dimensions | Yes |
Nominal Thickness Of M.S.Plate Used For Fabrication Of Water Tank To IS:1730 Latest And IS :2062 Latest For E-250BR Steel Grade. | 3.15 mm |
Size Of Channel Used For Frame For Mounting On Chassis. | 4150x65x125 |
Dimensions (L X W X H) | 4150x65x125 mm |
Gross Weight Of Water Tanker | 755 Kg |
Total Capacity Of Water Tank | 3500 Litres |
Net Water Carrying Capacity | 3500 Litres |
Relavent Surface Treatment /paint Details For Inner Surface Ensuring The Potability Of Water As Per IS | No |
Hat Type Tube Diameter/or Other Frame For Body Of Main Structure Welded With/ For Monocoque . | NA for factory built cabins mm |
Base Frame Structure ISMC To Be Fastened With Chassis With U Bolts/ For Monocoque | ISMC mm |
Exterior Panel Thickness Of Side Body And Roof / For Monocoque | Aluminium sheet of thickness 1 mm (min.) |
Interior Panel Thickness Of Side Body And Roof/ For Monocoque | NA for Monocoque |
Flooring Made Out From ISI Marked 12 Mm Thick BWR Grade Plywood Covered With Vinyle/Aluminium Sheet | NA for factory built cabins |
"Seating Plan:- (i)Co- Driver Seat Suitable For One/ Two Persons (tilt Able Type/fixed Type). " | Yes |
"Doors:- Flap Type Door With Fixed Toughened Glass & Locking Mechanism Manually Operated Window For Driver, Co-driver Compartment." | Yes |
"Glasses:- Front Wind Screen, Rear Glass In Two Pieces (toughened Type Glass As Per ARAI Approved). Window With Lock Cum Handle." | Yes |
Top Portion Of Fixed Glass Window & Bottom Portion In Two Halves In Sliding Pattern. | No |
Standard Automobile Paint To The Exterior Body As Per CMVR Rules For Water Tanker. | Yes |
Front Bumper Hook | Yes |
Rear Hook | Yes |
Fire Extinguisher | Yes |
Warranty Time | 12 Month |
Warranty Distance | 300000 kms or 12 months which ever is earlier Km |
Battery Warranty | 12 Months |
No. Of Free Service | 3 |
Transportation Charge In Rupees Per Km | 13.5 Rs/Km |
Hat Type Tube Diameter/or Other Frame( Thickness Of 1.6mm(min.)) For Side And Roof Of Main Structure Welded With/ For Monocoque | NA |