1-800-419-3436 / 1-800-102-3436 
Support Desk
×
All the transactions performed on 2.0 is available here. To access Market click "Home".
DC Voltage Range Volts 200mV-1000V DC Voltage Accuracy 0.5 percent 3AC Voltage Range Volts 200mV to 700V AC Voltage Accuracy 0.8 percent 5DC current range Amp 20uA - 10A DC current accuracy 1.0 percent 5 AC current range Amp 20uA - 10A AC current accuracy 1.8 percent 5Resistance range Ohm 200 - 200M Resistance accuracy 0.8 percent 3 - 5 percent.
| Other Specifications Download Specification | |
|---|---|
| Type | Hand Held |
| Display | 3.5 Digit |
| Measurement Type | True RMS |
| Count | 4000 |
| AC Voltage Measurement | 600 Volt |
| AC Voltage Measurement Accuracy | 0.08 % |
| DC Voltage Measurement | 600 Volt |
| DC Voltage Measurement Accuracy | 0.005 % |
| AC Current Measurement | 3 Ampere |
| AC Current Measurement Accuracy | 0.5 % |
| DC Current Measurement | 3 Ampere |
| DC Current Measurement Accuracy | 0.2 % |
| Resistance Measurement | 40 Mega Ohm |
| Resistance Measurement Accuracy | 0.06 % |
| Frequency Measurement | 50 Kilo Hertz |
| Frequency Measurement Accuracy | 100 % |
| Capacitance Mreasurement Range | 1 to 100 Micro Fara |
| Capacitance Measurement Accuracy | 1.5 % |
| Temperature Measurement | -40 to 400 Degree C |
| Temperature Measurement Accuracy | 1.5 % |
| Feature Of Continuity Test And Diode Test | Available |
| Feature Of Data Logging | Not Available |
| If Data Logging Feature Is Available, Internal Memory | min. 5000 points 200 readings |
| Computer Interface Alongwith Software | Not Available |
| True RMS AC Voltage Band Width | 100 |
| Safety Rating | Category II 600 V of IEC 61010. |
| Overload Protection | Through Fuse |
| Operating Temperature Range | NA |
| Operating Humidity (RH) | NA |
| Power Requirements | 230 V +-10 AC, 50 Hz +- 3 through Adaptor |
| Safety Certification (Certificate To Be Furnished When Demanded By Buyer) | UL |
| If Battery Operated, Type And No. Of Battery | RACTANGULAR BATTERY 9V |
| Total Voltage Of Battery | 9V |
| Standard Accessories Supplied With The Equipment | TEST LEADS |
| Dimensions (H X W X L) | Caution: Kindly do not use the multimeter to check AC voltage while on DC mode. The meter will get damaged with this and won't be replaced even in the return period. Data hold diode test hFE test continuity checking with buzzer. Display is 1999 counts. Auto power off lower battery indication. mm x mm x |
| Weight | 662 gms |
| Availability Of Test Reports From Central Govt / NABL Approved / ILAC Acredited Lab To Prove Conformity To The Specification Including Environmental Tests As Under : (a) Dry Heat : For 16 Hrs. At A Temp. Of 55 Degree C In Accordance With IS:9000/part-3/section-5/1977 (reaffirmed In 2007). (b) Cold Test : For 4 Hrs. At A Temp. Of -20 Degree C In Accordance With IS:9000/part-2/section-4/1977 (reaffirmed In 2007). (c) Damp Heat (Cyclic)Test : For 2 Cycles Of 24 H Each At A Temp. Of 40 Degree C & 95% RH In Accordance With IS:9000/part-5/section-1/ 1991 (reaffirmed In 2007). After Environmental Conditioning Sequence As Above And A Recovery Period Of Two Hours, The Instrument Shall Be Checked For Complete Functional Parameters, Which Should Be With In Limits.(Test Reports Are To Be Furnished When Demanded By Buyer) | Yes |
| Test Report No. | NA |
| Test Report Date | NA |
| Name Of The Lab | NA |
| Warranty | 1 Year |
Price Dekho Price List in india© 2018 GeM All rights reserved.
