1-800-419-3436 / 1-800-102-3436 
Support Desk
×
All the transactions performed on 2.0 is available here. To access Market click "Home".
Overall size of the panel is about 82 mm dia with dial of about 57mm dia, scale length is about 47mm 2mm.Accuracy 1.5 F.S.D. with anti parallax mirror. The Ammeters Voltmeters shall have jewel bearings, hardened polished pivots. The spring shall be treated with anticorrosive chemicals. The meters shall be fitted with Alnicohigh flux density magnets. The scale shall be with linear measurements with knife-edge pointer. Fitted with zero adjuster accessible from the front. The meters shall be housed in phenolic moulded dust proof cases having electrical connection from back. The type details are as below D.C.Ammeter 1,1.5,2.5,3, 5 Amps. D.C.Ammeter 10,15,20,25,30 Amps. D.C. Milliammeter 50,100,250,500 or 75...
| Other Specifications Download Specification | |
|---|---|
| DC Voltage Output Rating | 0 to 30 Volt |
| DC Current Output Rating | 0 to 4 Ampere |
| Maximum Power | 120 Watt |
| Load Regulation (Voltage) ± (% Of Output + Offset) | less than 0.01 + 2 mV |
| Load Regulation (Current) ± (% Of Output + Offset) | less than 0.05 + 1.5 mA |
| Line Regulation (Voltage) ± (% Of Output + Offset) | less than 0.01 + 1 mV |
| Line Regulation (Current) ± (% Of Output + Offset) | less than 0.05 + 0.1 mA |
| Over Voltage Protection Accuracy | +- 0.5 + 0.5 V |
| Over Voltage Protection Response Time | less than 10 milli sec |
| Ripple And Noise Voltage (20 Hz To 20 MHz) | less than 1 mVrms less than 4 mVpp |
| Ripple And Noise Current (20 Hz To 20 MHz) | less than 4 mArms |
| Readback Voltage Accuracy | 0.05 + 10 mV |
| Readback Current Accuracy | 0.15 + 4 mA |
| Readback Voltage Resolution | 1 mV |
| Readback Current Resolution | 0.1 mA |
| Operating Temperature | 0-50 Degree C |
| Gperating Humidity (RH) | N/A % |
| PC Interface | USB |
| Dimensions | N/A mm x mm x |
| Weight | GPIB gms |
| Availability Of Test Reports From Central Govt / NABL Approved / ILAC Acredited Lab To Prove Conformity To The Specification Including Environmental Tests As Under : (a) Dry Heat : For 16 Hrs. At A Temp. Of 55 Degree C In Accordance With IS:9000/part-3/section-5/1977 (reaffirmed In 2007). (b) Cold Test : For 4 Hrs. At A Temp. Of -20 Degree C In Accordance With IS:9000/part-2/section-4/1977 (reaffirmed In 2007). (c) Damp Heat (Cyclic)Test : For 2 Cycles Of 24 H Each At A Temp. Of 40 Degree C & 95% RH In Accordance With IS:9000/part-5/section-1/ 1991 (reaffirmed In 2007). After Environmental Conditioning Sequence As Above And A Recovery Period Of Two Hours, The Instrument Shall Be Checked For Complete Functional Parameters, Which Should Be With In Limits.(Test Reports Are To Be Furnished When Demanded By Buyer) | Yes |
| Test Report No. | N/A |
| Test Report Date | N/A |
| Name Of The Lab | N/A |
| Warranty | 1 Year |
Price Dekho Price List in india© 2018 GeM All rights reserved.
