The Fluke 1587 Insulation Multimeter combine a digital insulation tester with a full-featured, true RMS digital multimeter in a single, compact, handheld unit, which provides maximum versatility for both troubleshooting and preventative maintenance. Large display with backlight. Insulation testing from 0.01M Ohm to 2G Ohm. Test voltages 50V,100V,250V, 500V, 1000V.Live circuit detection prevents insulation test if voltage is greater than 30V is detected for added user protection. Auto discharge of capacitive voltage for added user protection. Filter for motor drive measurements. CAT III 1000 V, CAT IV 600 V measurement category. 3 Year warranty,.
Other Specifications Download Specification | |
---|---|
Type | Hand Held |
Measurement Range | 0.01 M Ohm to 10 G Ohm 0.01 M Ohm to 10 G Ohm 0.01 M Ohm to 10 G Ohm |
Test Voltage | 50, 100, 250, 500 and 1000 Volt |
AC/DC Voltage Measurement | 600 Volt |
AC/DC Voltage Measurement Resolution | 0. 1 % |
AC/DC Voltage Measurement Accuracy | 2 % |
Auto Discharge Time | Less than 0.5 Second |
Live Circuit Detection | Live circuit indicator 30 V to 600v ACDC,50 Hz |
Pass Fail Function | Yes |
Data Logging | NA |
Software | Not Available |
Safety Rating | Category III 600 V of IEC 61010 |
Leakage Current | 1 milliamper |
Operating Temperature Range | –20 °C to +55 °C Degree C |
Operating Humidity (RH) | 0% - 95% (10 °C – 30 °C),0% - 75% (30 °C – 40 °C), 0% - 40% (40 °C – 55 °C) % |
Power Requirements | Battery Operated |
Type Of Battery | AA Qty. 04 Nos. |
PC Interface | Available |
Standard Accessories Supplied With The Equipment | • Remote probe, Test leads, Alligator clips, K-type thermocouple, Hard case, Four AA alkaline batteries, Quick Reference Guide, CD Rom with Manual, |
Dimensions (H X W X L) | 203X100X50 mm x mm x |
Weight | 624 gms |
Availability Of Test Reports From Central Govt / NABL Approved / ILAC Acredited Lab To Prove Conformity To The Specification Including Environmental Tests As Under : (a) Dry Heat : For 16 Hrs. At A Temp. Of 55 Degree C In Accordance With IS:9000/part-3/section-5/1977 (reaffirmed In 2007). (b) Cold Test : For 4 Hrs. At A Temp. Of -20 Degree C In Accordance With IS:9000/part-2/section-4/1977 (reaffirmed In 2007). (c) Damp Heat (Cyclic)Test : For 2 Cycles Of 24 H Each At A Temp. Of 40 Degree C & 95% RH In Accordance With IS:9000/part-5/section-1/ 1991 (reaffirmed In 2007). After Environmental Conditioning Sequence As Above And A Recovery Period Of Two Hours, The Instrument Shall Be Checked For Complete Functional Parameters, Which Should Be With In Limits.(Test Reports Are To Be Furnished When Demanded By Buyer) | Yes |
Test Report No. | Standard |
Test Report Date | Standard |
Name Of The Lab | Standard |
Warranty | 3 |