LED Tube Light from the house of FortuneArrt is an ideal choice for your home or office needs. Aluminium Frame For Fixing On To Any Exterior Surface. Durable yet light weight, weighs only 500 grams apprx. Ultra Thin at only 35mm width. Over an average life time of 50,000 hours, this zero-maintenance LED light lasts more than 10 times that of your regular CFL Light Bulb. Reduce your carbon foot-print and switch to FortuneArrt LED Tube light. Save on electricity bill and maintenance costs..
Other Specifications Download Specification | |
---|---|
LED Lamp Efficacy | 120 Lm/W |
Led Tube Light Power Rating & Corresponding Min Luminious Flux | 20 Watt/2000 lumen |
Colour Temperature | 5700 K |
Light Source | SMD LED Chip |
LED Make | NICHIA |
LED Chip Wattage (Individual) | 0.25 Watt |
Length Of Tube Light (Nominal) | 1219.2 mm |
Type Of Tube Light Cap | G-13 Bi-pin |
Lamp Shell Material | Polycarbonate |
LED Chip Efficacy | 130 Lm/W |
Colour Rendering Index(CRI) | 85 |
Total Harmonics | 15 % |
Beam Angle | 120 Degree |
Driver Efficiency | 85 % |
Power Factor | 0.95 |
Rated Voltage For Performance And Life | 220-240 Volt |
Operating Voltage Range | 100-300 Volt |
Ingress Protection In IP | 20 |
EMC Test | Yes |
LED Tubelight Life Of 25,000hours Predicted As Per TM21 Report On Data Obtained As Per Test Conducted For 6000 Hours As Per LM80 | Yes |
Lumen Maintenance@25°C After 6000 Hrs | 99 % |
Certificare For Luminaire Photometric Data As Per LM79 | Yes |
Certificate No And Date Of Luminaire Photometric Data As Per LM 79 Report | 4787133798-01-NABL-S4 And 27.01.2016 |
Surge Voltage Withstand | 2.5 KV |
Compulsory Registration (CRS) BIS For Safety To IS 16102-I | Yes |
BIS Registration Certificate Under (CRS) No. & Date | HYBO/5121//L-4784181 & 05.08.2015 |
Warranty For Free Replacement | 3 Years |
LED Fixture With Al Back, Front With Polycarbonate/Acrylic Diffuser More Than 85%efficiency Of Lig | With |
Temprature Cyling Test And Supply Voltage Switching Test (1)product Shall Be Subjected To Minus 10 Degree C For 1 Hour,then Switch To 50 Degree C For 1 Hour In Total 5 Cycles.(2)30 Sec ON And 30 Sec Off .At The End Of Test As Per (1) And(2) ,no Visual Damage Shall Be Observed And Light Should Alight For More Than 15 Min After The Test | Yes |