1-800-419-3436 / 1-800-102-3436 
Support Desk
×
All the transactions performed on 2.0 is available here. To access Market click "Home".
The Testo 410-1 vane anemometer measures air velocity in m/s, fpm, knots, mph, km/h, and Beaufort scale and air temperature in degrees C and F calculates windchill temperature and has hold, maximum, minimum, and timed mean calculation functions for analyzing air flow. Hold function freezes a reading on the display to aid documentation, maximum and minimum functions display highest and lowest readings since the meter was powered on or reset, and timed mean calculation function displays an average reading over time. The meter includes a calibration certificate. The LCD shows air velocity and temperature measurement simultaneously and a backlight provides visibility in low light. The unit has an auto-off mode that shuts it down after 10 minutes of non-use to conserve battery life and has a low-battery indicator. A wrist strap provides a secure hold during one-hand operation. This anemometer is used for weather monitoring and for checking air flow and temperature in ductwork,.
| Other Specifications Download Specification | |
|---|---|
| Type Of Power Analyzer | Single phase |
| Display Type | LCD Backlit |
| Display Mode | LED Type |
| Number Of Current Channels | 0 Nos. |
| Number Of Voltage Channels | 0 Nos. |
| Facility To Measure RMS Voltage | Available |
| Measurable Voltage Range | 60 Volts |
| Measurable Voltage Accuracy | 6 |
| Measurable Voltage Resolution | 21 Volts |
| Facility To Measure RMS Current | Available |
| Measurable Current Range | 0-10 Ampere |
| Measurable Current Accuracy | +-0.1 |
| Measurable Current Resolution | 0.01 Ampere |
| Facility To Measure Active, Reactive And Apparent Power | Available |
| Maximum Power That Can Be Measured | 0.60 KW |
| Power Accuracy | 5 |
| Power Resolution | 120 Watt |
| Facility To Measure Active, Reactive And Apparent Energy | Available |
| Facility To Measure Sag(dips) And Swell(surge) | Available |
| Facility To Measure Frequency | Available |
| Frequency Range That Can Be Measured | NA Hz |
| Facility To Measure Total Harmonic Distortion | Available |
| Accuracy In Measurement Of Total Harmonics Distortion | NA |
| Resolution In Measurement Of Total Harmonics Distortion | NA |
| Facility To Measure Inter Harmonics | Available |
| Order(n) To Which Facility To Measure Harmonics Available | NA |
| Facility To Measure Power Factor | Available |
| Accuracy In Measurement Of Power Factor | NA |
| Facility To Measure Distortion Factor | Available |
| Accuracy In Measurement Of Distortion Factor | NA |
| Facility To Measure Ripple Factor | Available |
| Accuracy In Measurement Of Ripple Factor | NA |
| Facility To Measure Voltage And Current Unbalance | Available |
| Facility To Measure Inrush Current | Available |
| Facility To Measure Flicker | Available |
| Facility To Measure Crest Factor | Available |
| Measurable Crest Factor Range | NA |
| Measurable Crest Factor Accuracy | NA |
| Measurable Crest Factor Resolution | NA |
| Screen Memory | NA |
| Data Transfer Software Provided For Analysis On PC | Yes |
| Internal Memory | 1024 MB |
| Type Of Battery Used | 3AAA micro batteries |
| Battery Backup | 20 Hours |
| Power Supply(volts In AC) | 230 |
| Weight Of The Analyser | 150 Grams |
| Dimensions(LXWXH) | 4.9 x 3.7 x 3.6 cmXcmXcm |
| Provision For External SD Card | Yes |
| Operating Temperature Range | 0°C to +50°C degree celsius |
| Operating Humidity | 21 % |
| All Connecting Cables And Accessories To Be Supplied Along With The Analyzer | Yes |
| Details Of All Connecting Cables And Accessories To Be Supplied Along With The Analyzer | NA |
| Compliance To IEC 61000-4-30 | Yes |
| Category Of Safety Rating | NA |
| Dry Heat Test As Per IS :9000(Part 3/Section 5) | Yes |
| Damp Heat(cyclic Test): Two Cycles Of 24 Hours Each As Per IS: 9000(Part 5/section 1) | Yes |
| Cold Test At -20 Degree C For Four Hours As Per IS: 9000(Part2 /section 4) | Yes |
| Availability Of Type Test Report From Central Govt. /NABL/ILAC Accredited Lab. To Prove Confirmity To The Specification. | Yes |
| Type Test Report No. | As per OEM |
| TTC Report Date | As per OEM |
| Name Of Lab | As per OEM |
| Address Of Lab | As per OEM |
| Interface | No |
Price Dekho Price List in india© 2018 GeM All rights reserved.
