1-800-419-3436 / 1-800-102-3436 
Support Desk
×
All the transactions performed on 2.0 is available here. To access Market click "Home".
USABLE CAPACITY OF SAN SYSTEM 2 PB, HARDWARE FORM FACTOR OF SAN SYSTEM 4U Controller, TYPE OF DRIVE FMD/Flash/SSD/SAS/NL-SAS, MINIMUM NUMBER OF FRONT END PORTS 8 x 8Gbps, MINIMUM NUMBER OF BACK END PORTS 16 x 12 Gbps SAS Lanes, NO OF CONTROLLERS AVAILABLE IN SAN SYSTEM 2 Nos., TOTAL CONFIGURABLE CACHE PER CONTROLLER 64 GB, DRIVE SLOT SCALABILITY 480, NO OF DRIVE SLOTS POPULATED IN THE SAN SYSTEM 84, CAPACITY OF DRIVE AND TYPE 1.9TB SSD, 3.2TB/6.4TB/7TB/14TB Flash 600GB/1200GB/1800GB SAS 10K RPM4TB/6TB/10TB NL-SAS Drives, RAID OPTION 5, 6 10.
| Other Specifications Download Specification | |
|---|---|
| Usable Capacity Of SAN System | 100 TB |
| Type Of Drive | SAS |
| Minimum Number Of Front End Ports | 8 |
| Minimum Number Of Back End Ports | 4 |
| Total Configrable Cache Per Controller | 64 GB |
| Drive Slot Scalability | 500 No. |
| No Of Drive Slots Populated In The SAN System | 84 No. |
| Broad Specification Of SAN System On 6Gbps Or Higher On SAS Drive 10 K RPM / SSD : The System Comprise Of : 1. Set Of Fibre Channel Cables With LC-LC Connectors 5 M Long (for Each Active Port On The Storage). 2. Min Two Controllers (or As Applicable For Model Uploaded On The GeM )in Specified Configuration With Front End Port, Back End Port And Disc With 6 Gbps Speed. 3. Disk Array Populated With Dual Ported Drives Of 6Gbps Or Higher Disk, Redundant Power Supply And Fans, Hot-swappable. For Every 30 Disk, One Spare Disks Needs To Be Configured Over And Above The Required Capacity. 4. Two Redundant Hot-swappable Active-active RAID Controllers Configured For RAID 5/6 RAID Levels Or Better. The Useable Capacity Shall Be Configured On RAID 5/6 Or Better. 5. Storage Management Software For Configuration And Multi-pathing(part Of The Supply). 6. Multi-pathing And Load Balancing And Fail Over Software (part Of Supply) With License For 16 Windows/Linux Servers Or Shall Support Native Multipathing Of OS. 7. All Interconnecting Cables And Connectors. 8. The Array Be Supplied With 4 X 1 Gbps Or Higher ISCSI Ports Native Or Through Additional Controllers(part Of The Supply) For Item Uploaded. 9. Snapshot License Of The Provisioned Capacity (part Of The Supply). 10. The Storage Is Configured To Connect Minimum 16 Hosts. 11. The Storage Is Configured Along With Host Kit. The System Supports: 1. Hardware Based Data Replication At The Array Controller Level. 2. Storage Array Based Management Of Complete Array, The Software For Array Management Shall Be Turning On Array Controllers In High Availability. 3. The Array Is Capable To Support Remote Replication To DR Location. 4. On Line Micro Code Upgrade And Disk Expansion Upgrade Without Downtime. 5. Configuration In "No Single Point Of Failure" For Disk Drives, Power Supply. 6. SAN Storage To Be Configured With Host Kits Which Will Connect To The SAN Storage. | In-compliance with the specifications |
| Broad Specification Of SAN System On SATA II/NL-SAS Drive 0n 7.2 K RPM : The System Comprise Of : 1. Set Of Fibre Channel Cables With LC-LC Connectors 5 M Long (for Each Active Port On The Storage). 2. Min Two Controllers (or As Applicable For Model Uploaded On The GeM ) In Specified Configuration. 3. SATA II Disk Array Populated With Dual Ported SATA II Or NL-SAS Drives, Redundant Power Supply And Fans, Hot-swappable. 4. Two Redundant Hot-swappable Active-active RAID Controllers Configured For RAID 0, 5/6 RAID Levels Or Better. The Usable Capacity Should Be Configured On RAID 5/6 Or Better. For Every 30 Disk, One Spare Disks Needs To Be Configured Over And Above The Required Capacity. 5. Storage Management Software For Configuration And Multi-pathing (part Of The Supply). 6. Multi-pathing And Load Balancing And Fail Over Software With License For 16 Windows/Linux Servers Or Shall Support Native Multipathing Of OS (part Of The Supply). 7. All Interconnecting Cables And Connectors. 8. Snapshot License Of The Provisioned Capacity (part Of The Supply). 9. The Array Is Supplied With 4 X 1 Gbps Or Higher ISCSI Ports Native Or Through Additional Controllers (part Of The Supply). The System Shall Support : 1. 1/2/3/4TB LFF 7200RPM SATA/NL-SAS Drives. 2. Hardware Based Data Replication At The Array Controller Level. 3. The Array Is Capable To Support Remote Replication To DR Location. 4. On Line Micro Code Upgrade And Disk Expansion Upgrade Without Downtime. 5. Configuration In "No Single Point Of Failure" For Disk Drives, Power Supply. 6. SAN Storage To Be Configured With Host Kits Which Will Connect To The SAN Storage. | In-compliance with the specifications |
| SAN Switch | Available |
| Storage System Is Compliance With IPv6 | Yes |
| Scope Of Supply | It includes installation, commissioning & integaration togather with all necessary software to make the system fully functional as intended. |
| Additional Capacity (Compatible With Main Usable Capacity Of SAN) | Yes |
| If Yes, Additional Capacity Added | Minimum Upgrade capacity - 1 Raid Group TB |
| Capacity Of Each Drive, Number Of Drive & Type Of Drive To Achieve Additional Capacity | Depends on the requirement |
| Operating Temp. Range | 10°C to 40°C Degree C |
| Storage Temp. Range | -10°C to 50°C Degree C |
| Operating Humidity (Rh) | 8-80 % |
| Storage Humidity (Rh) | 8-80 % |
| BIS Registration Under CRS Of MeiTY | Yes |
| BIS Registration No ( Shall Be Furnished When Demanded By The Buyer) | Can provide on delivery |
| Other International Certification | Yes |
| If Yes, Type Of Certification & Certification No (Shall Be Furnished When Demanded By Buyer) | Can provide on delivery |
| Warranty | 3 Year |
| No Of Contrllers Available In SAN System | 2 |
| Capacity Of Drive And Type | 1.9TB SSD, 3.2TB/6.4TB/7TB/14TB Flash 600GB/1200GB/1800GB SAS 10K RPM 4TB/6TB/10TB NL-SAS Drives |
| RAID Option | 5, 6 & 10 |
| No Of SAN Switch Provided With The Sorage System | 2 |
| If Available, Type Of SAN Switch (@ 8Gbps Or Higher FC) | 16 Ports |
| No Of Active Ports In The SAN Switch | Depends on the requirement |
| Standby Power Consumption Of System | 4760 Watt KW |
| Max Power Consumption Of System | 7160 Watt KW |
| Hardware Form Factor Of SAN System | 4U Controller RU RU |
| Hardware Form Factor Of SAN Switch | Depends on the requirement RU RU |
| Protocols Supported By The Storage From Day 1 | FC,iSCSI - Mandatory CIFS/NFS/https/http/Webdev/S3 - Optional, depending on the requirement |
| Operating System Platforms And Clustering Supported By The Storage From Day 1 | WINDOWS SERVER 2008/2012, SUN SOLARIS, HP-UX, IBM AIX, RHEL, SUSE, Vmware |
Price Dekho Price List in india© 2018 GeM All rights reserved.
