× All the transactions performed on 2.0 is available here. To access Market click "Home".

hpe storeasy nas 1650 network array storage (hpe)(hpe storeasy nas 1650)

` 499,890.00

  • MRP: `650000.00

HP StoreEasy 1650 2 U Rack MountCapacity 16TB RAW HDDs 8x2TB LFF SAS ,RAID 5 pre-configured Usable Storage 12TB,upgradable upto 96TB, Processor Intel Xeon E5-2609v3 1.9GHz six core processor, RAM 16 GB DDR4 ECC RAM , scalable to 128 GB DDR4 RAM ,File Type Support CIFS, NFS, FTP, SMB3.0, SMB Direct RDMA, TCP/IP,HTTTP, Including iSCSI Support.LAN 2x 1Gb Nw PortsOS 2 x SFF SSDs for OS Microsoft Windows Storage Server -2012 R2 64 bit edition NAS optimized pre-installed, including powered OS drivers.Power Supply Redundant Hot-plug 800W AC power Input module, Warranty 3 Years.

  • Availability: 2 In Stock
  • Min. Qty. Per Consignee: 1
  • Type of Drive - SAS
  • Minimum number of Front end ports - 12
  • Minimum number of back end ports - 2
  • Drive slot Scalability - 100 No.
  • Broad Specification of SAN System on SATA II/NL-SAS Drive 0n 7.2 K RPM : The system comprise of : 1. Set of fibre channel cables with LC-LC connectors 5 m long (for each active port on the storage). 2. Min Two controllers (or as applicable for model uploaded on the GeM ) in specified configuration. 3. SATA II disk array populated with dual ported SATA II or NL-SAS drives, redundant power supply and fans, hot-swappable. 4. Two redundant hot-swappable active-active RAID controllers configured for RAID 0, 5/6 RAID levels or better. The usable capacity should be configured on RAID 5/6 or better. For every 30 disk, one spare disks needs to be configured over and above the required capacity. 5. Storage management software for configuration and multi-pathing (part of the supply). 6. Multi-pathing and load balancing and fail over software with license for 16 windows/Linux servers or shall support native multipathing of OS (part of the supply). 7. All interconnecting cables and connectors. 8. Snapshot license of the provisioned capacity (part of the supply). 9. The array is supplied with 4 x 1 Gbps or higher iSCSI ports native or through additional controllers (part of the supply). The System shall support : 1. 1/2/3/4TB LFF 7200RPM SATA/NL-SAS drives. 2. Hardware based data replication at the array controller level. 3. The array is capable to support remote replication to DR location. 4. On line micro code upgrade and disk expansion upgrade without downtime. 5. Configuration in "No Single Point of Failure" for disk drives, power supply. 6. SAN Storage to be configured with Host kits which will connect to the SAN Storage. - NA
Other Specifications Download Specification
Usable Capacity Of SAN System 10 TB
Type Of Drive SAS
Minimum Number Of Front End Ports 12
Minimum Number Of Back End Ports 2
Total Configrable Cache Per Controller 16 GB
Drive Slot Scalability 100 No.
No Of Drive Slots Populated In The SAN System 8 No.
Broad Specification Of SAN System On 6Gbps Or Higher On SAS Drive 10 K RPM / SSD : The System Comprise Of : 1. Set Of Fibre Channel Cables With LC-LC Connectors 5 M Long (for Each Active Port On The Storage). 2. Min Two Controllers (or As Applicable For Model Uploaded On The GeM )in Specified Configuration With Front End Port, Back End Port And Disc With 6 Gbps Speed. 3. Disk Array Populated With Dual Ported Drives Of 6Gbps Or Higher Disk, Redundant Power Supply And Fans, Hot-swappable. For Every 30 Disk, One Spare Disks Needs To Be Configured Over And Above The Required Capacity. 4. Two Redundant Hot-swappable Active-active RAID Controllers Configured For RAID 5/6 RAID Levels Or Better. The Useable Capacity Shall Be Configured On RAID 5/6 Or Better. 5. Storage Management Software For Configuration And Multi-pathing(part Of The Supply). 6. Multi-pathing And Load Balancing And Fail Over Software (part Of Supply) With License For 16 Windows/Linux Servers Or Shall Support Native Multipathing Of OS. 7. All Interconnecting Cables And Connectors. 8. The Array Be Supplied With 4 X 1 Gbps Or Higher ISCSI Ports Native Or Through Additional Controllers(part Of The Supply) For Item Uploaded. 9. Snapshot License Of The Provisioned Capacity (part Of The Supply). 10. The Storage Is Configured To Connect Minimum 16 Hosts. 11. The Storage Is Configured Along With Host Kit. The System Supports: 1. Hardware Based Data Replication At The Array Controller Level. 2. Storage Array Based Management Of Complete Array, The Software For Array Management Shall Be Turning On Array Controllers In High Availability. 3. The Array Is Capable To Support Remote Replication To DR Location. 4. On Line Micro Code Upgrade And Disk Expansion Upgrade Without Downtime. 5. Configuration In "No Single Point Of Failure" For Disk Drives, Power Supply. 6. SAN Storage To Be Configured With Host Kits Which Will Connect To The SAN Storage. NA
Broad Specification Of SAN System On SATA II/NL-SAS Drive 0n 7.2 K RPM : The System Comprise Of : 1. Set Of Fibre Channel Cables With LC-LC Connectors 5 M Long (for Each Active Port On The Storage). 2. Min Two Controllers (or As Applicable For Model Uploaded On The GeM ) In Specified Configuration. 3. SATA II Disk Array Populated With Dual Ported SATA II Or NL-SAS Drives, Redundant Power Supply And Fans, Hot-swappable. 4. Two Redundant Hot-swappable Active-active RAID Controllers Configured For RAID 0, 5/6 RAID Levels Or Better. The Usable Capacity Should Be Configured On RAID 5/6 Or Better. For Every 30 Disk, One Spare Disks Needs To Be Configured Over And Above The Required Capacity. 5. Storage Management Software For Configuration And Multi-pathing (part Of The Supply). 6. Multi-pathing And Load Balancing And Fail Over Software With License For 16 Windows/Linux Servers Or Shall Support Native Multipathing Of OS (part Of The Supply). 7. All Interconnecting Cables And Connectors. 8. Snapshot License Of The Provisioned Capacity (part Of The Supply). 9. The Array Is Supplied With 4 X 1 Gbps Or Higher ISCSI Ports Native Or Through Additional Controllers (part Of The Supply). The System Shall Support : 1. 1/2/3/4TB LFF 7200RPM SATA/NL-SAS Drives. 2. Hardware Based Data Replication At The Array Controller Level. 3. The Array Is Capable To Support Remote Replication To DR Location. 4. On Line Micro Code Upgrade And Disk Expansion Upgrade Without Downtime. 5. Configuration In "No Single Point Of Failure" For Disk Drives, Power Supply. 6. SAN Storage To Be Configured With Host Kits Which Will Connect To The SAN Storage. NA
SAN Switch Not-Available
Storage System Is Compliance With IPv6 Yes
Scope Of Supply It includes installation, commissioning & integaration togather with all necessary software to make the system fully functional as intended.
Additional Capacity (Compatible With Main Usable Capacity Of SAN) No
If Yes, Additional Capacity Added na TB
Capacity Of Each Drive, Number Of Drive & Type Of Drive To Achieve Additional Capacity na
Operating Temp. Range na Degree C
Storage Temp. Range na Degree C
Operating Humidity (Rh) na %
Storage Humidity (Rh) na %
BIS Registration Under CRS Of MeiTY Yes
BIS Registration No ( Shall Be Furnished When Demanded By The Buyer) na
Other International Certification Yes
If Yes, Type Of Certification & Certification No (Shall Be Furnished When Demanded By Buyer) na
Warranty 3 Year
No Of Contrllers Available In SAN System 2
Capacity Of Drive And Type 2TB SAS
RAID Option 0,1,5
No Of SAN Switch Provided With The Sorage System NA
If Available, Type Of SAN Switch (@ 8Gbps Or Higher FC) NA
No Of Active Ports In The SAN Switch 0
Standby Power Consumption Of System .10 KW
Max Power Consumption Of System .80 KW
Hardware Form Factor Of SAN System 2 U RU
Hardware Form Factor Of SAN Switch na RU
Protocols Supported By The Storage From Day 1 iSCSI, SMB, CIFS, NFS
Operating System Platforms And Clustering Supported By The Storage From Day 1 Windows Storage Server 2012 Preloaded

Price Dekho Price Dekho Price List in india