1-800-419-3436 / 1-800-102-3436 
Support Desk
×
All the transactions performed on 2.0 is available here. To access Market click "Home".
The Dual Trace Oscilloscope is a solid state portable instrument designed to operate in a wide range of environmntal conditions. Featuring a well organized front panel and full size CRT, this light weight Oscilloscope can be easily transported, While providing the performance necessary for accurate high frequency measurements. The low noise Dual channel DC to 20MHz vertical system provides calibrated deflection factors from 5mv/div to 20V/div.Sweep rate of horizontal system is 0.3usec /cm to 0.1sec /cm in 12 calibrated steps. FEATURES - 5 mV vertical sensitivityDC-20 MHz BandwidthInternal, External and mains triggerCalibrated scopewith component testerCH1,CH2,DUAL,ADD,ALT/CHOP, X-Y modeTrigger modes Auto, Normal LF / HFControls Intensity,Focus,Trace rotate,DCBalance for both channelsCalibrated signal output square wave @1KHz.
| Other Specifications Download Specification | |
|---|---|
| Type | Analog |
| Operating System | Non -Windows |
| Bandwidth Upgradability | No |
| No. Of Analog Channels | 2 Number |
| Digital Channels | No |
| No. Of Digital Channels | NA Number |
| Record Length Per Digital Channel Simultaneously | NA GS/sec |
| Sampling Rate Per Digital Channel Simultaneously | NA Mega Points |
| Min. Detectable Pulse Width | NA ns |
| Memory Upgradability | No |
| Segmented Memory Feature Availability | No |
| Vertical Sensitivity | 1mV/Div to 5 V/Div |
| Vertical Resolution | NA bits |
| Coupling | AC, DC ,GND (Switch Selectable) |
| Time Base Range | 0. 2sec /div to 0.5 usec/div |
| Trigger Types | pulse width,pattern/state, External |
| Measurements | NA |
| Frequency Analysis Feature | No |
| In-built Frequency Counter | No |
| In-built Function Generator | No |
| Acquisition Modes | Normal |
| Display Type | Monochrome |
| Display Size | 14 CM |
| I/O Interface | NA |
| Standard Accessories To Be Supplied | ProProbes, Manual , Power Chord |
| Operating Temperature Range | 55 C Degree C |
| Operating Humidity (RH) | 95 % |
| Power Supply | 230V +- 10 , 50Hz |
| Availability Of Test Reports From Central Govt / NABL Approved / ILAC Acredited Lab To Prove Conformity To The Specification Including Environmental Tests As Under : 1. Dry Heat Test : 45 Deg C For 16 Hours As Per IS:9000/Pt.3/sec.5/1977 (reaffirmed In 2007) 2. Cold Test : 0 Deg C For 4 Hours As Per IS:9000/Pt.2/sec.4/1977 (reaffirmed In 2007) 3. Damp Heat Test: 95% RH At 40 Deg C, Two Cycles Of 24 Hours Each Separated By A Gap Of 4 Hours As Per IS:9000/Pt.5/sec. 1/1991 (reaffirmed In 2007) The Oscilloscopes Shall Be Checked Functionally Before And After Recovery Period Of 1-2 Hours Of The The Environmental Test Sequence As Above. Functional Tests Shall Include Switching ON And Calibration | yes |
| Test Report No. | IAS/QMS/B1694 |
| Test Report Date | 24/11/2017 |
| Name Of The Lab | CCPL |
| Warranty | 1 Year |
| Real Time Bandwidth | 20 MHz |
| Record Length Per Analog Channel Simultaneously | NA Mega Point |
| Sample Rate Per Analog Channel Simultaneously | NA GS/sec |
| Waveform Update Rate | NA Waveforms/ |
| Time Base Accuracy | 3 PPM |
Price Dekho Price List in india© 2018 GeM All rights reserved.
