SIGLENTs new SDS1000X-E Series Super Phosphor Oscilloscope is available in one bandwidth, 200 MHz. It has a maximum sample rate of 1 GSa/s and a standard recordlength of 14 Mpts. For ease-of-use, the most commonly used functions can be accessed with its user-friendly front panel design.The SDS1000X-E series employs a new generation of SPO Super Phosphor Oscilloscope technology that provides excellent signal fidelity and performance. The system noise is also lower than similar products in the industry. It comeswith a minimum vertical input range of 500 uV/div, an innovative digital trigger system with high sensitivity and low jitter, and a waveform capture rate of 400,000 frames/ sec sequence mode. The SDS1000X-E also employs a 256-level intensity grading display function and a color temperature display mode not found in other models in this class. Siglents latest oscilloscopes offering supports multiple powerful triggering modes including serial bus triggering..
Other Specifications Download Specification | |
---|---|
Type | Mixed Signal |
Operating System | Non -Windows |
Bandwidth Upgradability | No |
No. Of Analog Channels | 4 Number |
Digital Channels | Yes |
No. Of Digital Channels | 16 Number |
Record Length Per Digital Channel Simultaneously | 14M points GS/sec |
Sampling Rate Per Digital Channel Simultaneously | 1GS/s Mega Points |
Min. Detectable Pulse Width | 4 ns |
Memory Upgradability | No |
Segmented Memory Feature Availability | Yes |
Vertical Sensitivity | 1mV/Div to 5 V/Div |
Vertical Resolution | 8 bits |
Coupling | AC, DC, Ground |
Time Base Range | 1ns/div to 100s/div |
Trigger Types | Edge, Slope, Pulse, Video, Window, Interval, Dropout, Runt, Pattern |
Measurements | 38 Types of Automatic Measurements of Time, Voltage and Delay. Math Function - + , - , * , / , FFT , d/dt , ∫dt , √ |
Frequency Analysis Feature | No |
In-built Frequency Counter | Yes |
In-built Function Generator | No |
Acquisition Modes | Normal, Peak detect, Average, Enhance Resolution |
Display Type | Colour |
Display Size | 17.78 CM |
I/O Interface | USB Host, USB Device, LAN, Pass/Fail, Trigger out |
Standard Accessories To Be Supplied | 4 nos. Passive Probe, Quick start, USB Cable, Certification, Power Cord, 16 Channel Digital Pod |
Operating Temperature Range | 10 deg C to 40 deg C Degree C |
Operating Humidity (RH) | 85%RH at 40 deg C % |
Power Supply | 230V +- 10% , 50Hz |
Availability Of Test Reports From Central Govt / NABL Approved / ILAC Acredited Lab To Prove Conformity To The Specification Including Environmental Tests As Under : 1. Dry Heat Test : 45 Deg C For 16 Hours As Per IS:9000/Pt.3/sec.5/1977 (reaffirmed In 2007) 2. Cold Test : 0 Deg C For 4 Hours As Per IS:9000/Pt.2/sec.4/1977 (reaffirmed In 2007) 3. Damp Heat Test: 95% RH At 40 Deg C, Two Cycles Of 24 Hours Each Separated By A Gap Of 4 Hours As Per IS:9000/Pt.5/sec. 1/1991 (reaffirmed In 2007) The Oscilloscopes Shall Be Checked Functionally Before And After Recovery Period Of 1-2 Hours Of The The Environmental Test Sequence As Above. Functional Tests Shall Include Switching ON And Calibration | yes |
Test Report No. | 20178109 |
Test Report Date | November 02, 2017 |
Name Of The Lab | Siglent |
Warranty | 3 Year |
Real Time Bandwidth | 200 MHz |
Record Length Per Analog Channel Simultaneously | 7 Mega Point |
Sample Rate Per Analog Channel Simultaneously | 500Ms/s GS/sec |
Waveform Update Rate | 100000 Waveforms/ |
Time Base Accuracy | 25 PPM |