1-800-419-3436 / 1-800-102-3436 
Support Desk
×
All the transactions performed on 2.0 is available here. To access Market click "Home".
Drilling machine 6mm.
| Other Specifications Download Specification | |
|---|---|
| Confirmity To Standards For Purcahse Specification For Machine Tools , Part 6 Bench /Pillar Type Drill Machine | IS : 6893-6 (1985) with latest amndmt. |
| Type Of Drill Machine | Pillar |
| Drive | Gear Drive |
| Colour Of The Driiling Machine As Per IS :5:2004 With Latest Amndmnt. | OCEAN BLUE OR APPLE GREEN |
| Drilling Capacity In Steel Having 600 Mpa Tensile Strength | 40 mm |
| If Others , Please Specify The Drilling Capacity In Steel Having 600 Mpa Tensile Strength | 40 mm |
| Drilling Capacity In Cast Iron | 45 mm |
| Tapping Capacity In Steel Having 600 Mpa Tensile Strength | 25 mm |
| Tapping Capacity In Others Materials | 25 mm |
| Cutting Speed | 90-900 m per min |
| Feed | 0.1-0.4 mm per rev |
| Type Of Machine Vice | Push Type |
| Machine Vice Arrangement | Fixed Base |
| Normal Size Of Machine Vice | 160 mm |
| If Other Size Of Machine Vice Please Declare | 160 mm |
| Maximum Drilling Radius | 100 mm |
| Distance Between Work Table And Spindle , Max As Per IS :7764 With Latest Amdmnt. | 100 mm |
| Distance Between Spindle And Base Plate , Max As Per IS :7764 With Latest Amdmnt. | 200 mm |
| Distance Between Centre Of Spindle & Pillar Front | 50 mm |
| Type Of Work Table | Circular |
| Clamping Area | 380 mm x mm |
| Nominal Size Of T Slots As Per IS 2013-1985 With Latest Amndmt. | 100 mm |
| Spacing Of T Slots | 50 mm |
| Maximum Weight Of The Job ( Including Fixture ) That Can Be Loaded On The Work Table | 20 kg |
| Spindle Travel | Automatic |
| Taper In Spindle Bore As Per IS 1715:2002 | 200 mm |
| Range Of Spindle Speed (i.e. 640-1040-1600-2280) | 640-1040-1600-2280 rev/ min |
| No. Of Feed | 3 mm per min |
| Clamping Range | 200 mm |
| Travel Of Rail ( Vertical) | manual lifting mm/min mm/min |
| Travel Of Drilling Head ( Horizontal) | Fixed head mm/min mm/min |
| Type Of Lubrication | MANUAL |
| Weight Of Drill Machine With Electrical And Standards Accessories | 1.9 kg |
| Floor Space Required ( Length X Width ) | 840X470 mm x mm |
| Piller Length , If Not Put 0 (in Case Of Bench Type Drill Machine) | 200 mm |
| Pillar Diameter If Not Put 0 (in Case Of Bench Type Drill Machine) | 0 mm |
| Geometric And Practical Drilling Machine Accuracy As Per IS 2425 & IS 2426 With Latest Amndmnt. | Yes |
| List Of Standards Accessories Including Motor Pulley, Drill Drift Etc. | Chunk Wrench,Side Handle, DEpth Stopper |
| List Of Optional Accessories | NA |
| Motor Output | 0.5 hP |
| If Others Motor Output Please Specify | 1 hP |
| Power Supply ( V, Ph, Hz ) | 1 |
| Make Of Motor | Kalsi, Crompton, Siemens, Havells |
| Frame Size And Mounting For Motor As Per IS : 1231:1974 With Latests Amndmt. | Yes |
| Auxiliary Motor | yes |
| If Yes Auxiliary Motor Output, Voltage, Phase, Frequency And Make ,otherwise Put NA | NA |
| Output Of Coolant Pump | 0.5 Kw |
| Speed Of Coolant Pump | 0.5 rev /min |
| Discharge Of Pump At Max Working Height | 2700-2800 l per min |
| Noise Emitted By Machine | 85 dB |
| Mechanical Gurading As Per IS : 9474-1980 With Latest Amndmnt. | Yes |
| Angle Of Drilling Head Rotation | 10 degree |
| Angle Of Drilling Head Swivel From Horizontal Upwards And Downwards | 1 degree |
| Size Of Box Table (mm X Mm X Mm) | 2 mm3 |
| Size Of Universal Table ( Mm X Mm X Mm) | 1 mm3 |
| Availability Of Test Report As Per IS : 6893-6 (1985) Used For Purcahse Specification For Machine Tools , Part 6 Bench /Pillar Type Drill Machine With Latest Amndmt.from Central Govt./NABL/ILAC Acredited Lab To Prove Confirmity To Specification | Yes |
| Test Report No. | pal-35-11/17-18 |
| Test Report Date | 12/11/17 |
| Name Of The Lab | planet analysis |
| Address Of The Lab | kanpur |
Price Dekho Price List in india© 2018 GeM All rights reserved.
