1-800-419-3436 / 1-800-102-3436 
Support Desk
×
All the transactions performed on 2.0 is available here. To access Market click "Home".
Furnace Oil Filtration Machine with flow rate of 1000 LPH..
| Other Specifications Download Specification | |
|---|---|
| Mode Of Working | Offline |
| Type | Portable |
| Type Of Oil For Which Machine Is To Be Used For Cleaning | Others |
| Type Of Cleaning | Removal of Both Soild Contamination and Liquid Contamination |
| Nominal Flow Rate | 1000 LPH |
| Centrifuge Pump Flow Rate | 20 LPM |
| Centrifuge Motor Capacity | 1 HP |
| Centrifuge Make Of Motor | Crompton |
| Suction Pump Flow Rate | 20 LPM |
| Suction Pump Motor Capacity | 1 HP |
| Make Of Motor(Suction Pump) | Crompton |
| Discharge Pump Flow Rate | 20 LPM |
| Discharge Pump Motor Capacity | 1 HP |
| Make Of Motor( Discharge Pump) | Crompton |
| Dirt Holding Capacity | others grams |
| Dirt Holding Capacity( For Others) | 5000 grams |
| Minimum Size Of Dirt( Including Metallic ,Non Metallic ,Suspended Soild Particle ) | upto 10 micron |
| Length Of Inlet Wire Braided Hose Pipe | 5000 mm |
| Diameter Of Inlet Wire Braided Hose Pipe | 15 mm |
| Length Of Outlet Wire Braided Hose Pipe | 5000 mm |
| Diameter Of Outlet Wire Braided Hose Pipe | 15 mm |
| Vacuum Pump For First Stage | No |
| Vacuum Pump For Second Stage | No |
| Vacuum Pump Motor Capacity ( For First Stage ) | NA HP |
| Vacuum Pump Motor Capacity ( For Second Stage ) | NA HP |
| Vacuum Booster For First Stage | No |
| Vacuum Booster For Second Stage | No |
| Vacuum Booster Motor Capacity ( For First Stage ) | NA HP |
| Vacuum Booster Motor Capacity ( For Second Stage ) | NA HP |
| Vacuum Blower | No |
| Vacuum Blower Motor Capacity | Not needed hp |
| Moisture Separator | Yes |
| If Yes Then Moisture Separating Capacity (otherwise Put NA) | 150 ml |
| Moisture Seperator Capacity (for Others ) | NA ml |
| Operating Pressure ,Max | 2 Bar |
| Operating Temperature | ambient Degree Celcius |
| Heating System | Yes |
| Heater Capacity | Not needed kw |
| Degassing Chamber | Yes |
| Dimensions Of Degassing Chamber (Diameter X Height) | Not needed mm x mm |
| Capacity Of Degassing Chamber | Not needed ltrs |
| Ionic Reaction Cartridge | No |
| Oil Reclamation Cartridge | No |
| Water Adsorption Cartridge | Yes |
| Filter Cartridge ( For Solid Contamination Removal Only) | Consumable |
| Magnetic Strainer | Yes |
| Length Of The Centrifugal Oil Cleaning Machine | 1100 apx. mm |
| Width Of The CentrifugalOil Cleaning Machine | 600 apx. mm |
| Height Of The Centrifugal Oil Cleaning Machine | 900 apx. mm |
| Weight Of The Centrifugal Oil Cleaning Machine | 900 apx. Kg |
| Make Of Control Panel (All Parts) | Others Confirming to IS |
| Dimensions Of Panel Box Confirming To IS 10322/1982Reaffirmed 2005( Length X Width X Height ) | others mm x mm x mm |
| If Others Then Specify The Dimensions In LxWx H) | 500X300X550 apx. mm x mm x mm |
| Thickness Of Panel Box Confirming To IS 10322/1982Reaffirmed 2005 | 300 apx. mm |
| Online Moisture PPM Sensor | No |
| Tramp Oil Skimmer | No |
| Flowmeter | Yes |
| Voltmeter (0-500 V) With Inbuilt Selector Switch | Yes |
| Control Transformer | Yes |
| Ammeter Digital 0-20 Amps | Yes |
| Hours Counter Meter | Yes |
| Indicator Light 3-ph | Yes |
| No. Of Push Button | 6 |
| Legent Plate 3mm Thick | Yes |
| MCB TP 10-32 Amp | Yes |
| MCB SP 2- Amp For Volt/Cont | Yes |
| 12 Amp Contactor 3 Pole | Yes |
| O/L Relay 4-6.5 Amp | Yes |
| Terminal Block 2.5 Mm | Yes |
| Protection Relay Model -VSP-D1 | Yes |
| Over Load Trip Indication 22.5 Mm Dia | Yes |
| PVC Gland 13.5 /16x4x1.5 Mm | Yes |
| Cable 4Cx 1.5 Mm(5 Meter) | Yes |
| Machine Enclosure | Weather Proof |
| Machine Wheels | Castor |
| Lsit Of Standards Accessories Of Panel Box With Numbers To Be Provided | Indicator Light 3 phase - 3 Nos. Volt meter - 1 Nos. Amp. meter - 1 Nos. Hour Counter - 1 Nos. Push Button - 4 Nos. MCB TP 32 Amp - 1 Nos. MCB SP 6 Amp - 3 Nos. Contractor - 12 Amp 3 pole 2 Nos. O/L Relay - 2.5-4 Amp - 2 Nos. Protection relay - VSP- D-1 Cable Wire - 4C X 1.5mm2 |
| Availability Of Test Report From Central Govt./NABL/ILAC Acredited Lab To Prove Confirmity To Specification | Yes |
| Test Report No. | N-20912 |
| Test Report Date | 4-Feb-2015 |
| Name Of The Lab | Narang Metallurgical and Spectro Services |
| Address Of The Lab | Delhi |
Price Dekho Price List in india© 2018 GeM All rights reserved.
