Signal Generator Based DDS Signal Generator Sine Square Triangle Wave Output PSU 12v-24v DC.
Other Specifications Download Specification | |
---|---|
Type | RF Signal Generator |
Frequency Range | 9 KHz to 1 GHz |
Frequency Resolution | 0,1 Hz |
Ageing Rate For Reference Frequency (As Declared By OEM) | Less than 1 PPM/Year |
Temperature Stability For Reference Frequency | Less than 1 PPM |
SSB Phase Noise At 1GHz,on 20KHz Offset (dBc/Hz) | less than -95 dBc |
Harmonics At 3 GHz Level At 0 DBm | less than -30 dBc |
Non Harmonics (>10 KHz Carrier Offset) | less than -50 dBc |
Non Harmonics (>50 KHz Carrier Offset) | less than -55 dBc |
Reverse Power Protection | 5 Watt |
Minimum Output Level | -105 dBm |
Maximum Output Level | +5 dBm |
Output Level Resolution | 0,1 dB |
Total Accuracy Forall Specified Output Level At 25 Degree C In Continuous Wave Mode | +-0.1 dB |
VSWR On All Operating Frequencies | 1 |
Memory (Minimum Storage Settings) | 11 |
Amplitude Modulation (AM) Operating Modes | Internal & External |
Minimum Amplitude Modulation Frequency (3 DB), F > 100 KHz | 3 Hz |
Maximum Amplitude Modulation Frequency (3 DB), F > 100 KHz | 3 KHz |
Modulation Depth | 5 % |
Resolution Of AM | 5 |
AM Distortion At 1 KHz | 1 |
Frequency Modulation (FM) Operating Modes | Internal & External |
Minimum Frequency Modulation Frequency (-3 DB) Standard | 5 |
Maximum Frequency Modulation Frequency (-3 DB) Standard | 5 |
Minimum Frequency Deviation | 5 |
Maximum Frequency Deviation | 5 KHz |
Resolution Of FM | 1 |
Setting Error (at AF=1 KHz And 50% Max. Deviation) For FM | 5 |
Phase Modulation | Available |
If Available, Phase Modulation Operatinf Mode | Internal & External |
Minimum Phase Deviation | NA Radians |
Maximum Phase Deviation | NA Radians |
Resolution Of Phase Modulation | 1 % |
Setting Error (at AF=1 KHz) For Phase Modulation | 0.02 |
Internal Modulation Generator For AM/FM/PM | 0.1 |
Pulse Modulation | Available |
If Available, Pulse Modulation Operating Modes | Internal & External |
Rise And Fall Time | 1 ns |
On/Off Ratio | 80 dB |
Minimum Pulse Width | 1 ns |
Input Level | TTL |
RF Digital Sweep Range And Width | 1 |
RF Digital Sweep Time Range | 5 |
RF Analog Sweep | Available |
If Available, RF Analog Sweep Range And Width | NA |
RF Analog Sweep Time Range | 30 |
Pulse Generator | Available |
If Available, Pulse Generator Operating Mode | Automatic, externally triggered, external gate mode, single pulse, double pulse, delayed pulse(externally triggered) |
Pulse Width | 30 |
Pulse Delay | 1 |
Pulse Period | 1 |
Vector Modulation | Available |
Internal Base Band Generator Bandwidth | NA MHz |
Arbitory Waveform Memory | NA Mega samples |
Modulation | BPSK |
Error Vector Magnitude (EVM) | 2 % |
Phase Modulator | Available |
If Available, Range Of Modulating Signal (Wide Mode) | 1 |
If Available, Range Of Modulating Signal (Narrow Mode) | 8 |
Interface Available | NA |
Standard Acessories (To Be Supplied) | INCLUDED |
Power Requirements | 230 V +/-10% AC, 50 Hz +/- 3% |
Operating Temperature Range | 5 Degree C |
Operating Humidity (RH) | 30 % |
"Availability Of Test Reports From Central Govt / NABL Approved / ILAC Acredited Lab To Prove Conformity To The Specification Including Environmental Tests As Under : 1. Dry Heat Test : 45 Deg C For 16 Hours As Per IS:9000/Pt.3/sec.5/1977 (reaffirmed In 2007) 2. Cold Test : 0 Deg C For 4 Hours As Per IS:9000/Pt.2/sec.4/1977 (reaffirmed In 2007) 3. Damp Heat Test: 95% RH At 45 Deg C, Two Cycles Of 24 Hours Each Separated By A Gap Of 4 Hours As Per IS:9000/Pt.5/sec. 1/1991 (reaffirmed In 2007) All The Functional Paramteres Are To Be Verified Before And After Recovery Period Of 1 Hours Of Above Environmental Test Sequence As Above. There Shall Be No Deterioration In Functional Parameters. | Yes |
Test Report No. | 311170 |
Test Report Date | 04/08/2015 |
Name Of The Lab | SWISSCERT |
Warranty | 3 Years |