0-30V, 0-3A, 2 Channels, 0-5V,0-3A 01 Channel ,Independent, full programmable and electrically isolated output, Display and adjust Voltage and Current settings for all 3 channels, Flexible output configuration connect CH1 or CH2 channel in Parallel, Excellent stability and regulation, LVP_Low Voltage_ and OTP_Over Voltage Protection, Output On/Off Control, 27 Memory Location for instrument state storage and recall, Load Regulation plus minus percentage output plus minus offset, voltage less than equal to 0.01percent plus 3mV,Current less than equal 0.2percent plus 3mA, Line Regulation plus minus percentage of output plus offset voltage less than equal to 0.01percent plus 3mV,Current less than equal to 0.2 percent plus 3mA,Programmable Resolution Voltage 10mV Current 1mA,Programming Accuracy Voltage less than equal 0.06 percent plus 20mV Current less than equal 0.2 percent plus 10mA, Ripple and Noise Voltage less than equal 5mVpp_1mVrms Current less than equal to 6mArms..
Other Specifications Download Specification | |
---|---|
DC Voltage Output Rating | 0 to 30 Volt |
DC Current Output Rating | 0 to 4 Ampere |
Maximum Power | 120 Watt |
Load Regulation (Voltage) ± (% Of Output + Offset) | less than 0.01 + 2 mV |
Load Regulation (Current) ± (% Of Output + Offset) | less than 0.05 + 1.5 mA |
Line Regulation (Voltage) ± (% Of Output + Offset) | less than 0.01 + 1 mV |
Line Regulation (Current) ± (% Of Output + Offset) | less than 0.05 + 0.1 mA |
Over Voltage Protection Accuracy | +- 0.5 + 0.5 V |
Over Voltage Protection Response Time | less than 10 milli sec |
Ripple And Noise Voltage (20 Hz To 20 MHz) | less than 1 mVrms less than 4 mVpp |
Ripple And Noise Current (20 Hz To 20 MHz) | less than 4 mArms |
Readback Voltage Accuracy | 0.05 + 10 mV |
Readback Current Accuracy | 0.15 + 4 mA |
Readback Voltage Resolution | 1 mV |
Readback Current Resolution | 0.1 mA |
Operating Temperature | 0-40 degree C Degree C |
Gperating Humidity (RH) | 80 % |
PC Interface | USB |
Dimensions | 214.5mmW X 88.2mmH X 354.6mmD mm x mm x |
Weight | GPIB gms |
Availability Of Test Reports From Central Govt / NABL Approved / ILAC Acredited Lab To Prove Conformity To The Specification Including Environmental Tests As Under : (a) Dry Heat : For 16 Hrs. At A Temp. Of 55 Degree C In Accordance With IS:9000/part-3/section-5/1977 (reaffirmed In 2007). (b) Cold Test : For 4 Hrs. At A Temp. Of -20 Degree C In Accordance With IS:9000/part-2/section-4/1977 (reaffirmed In 2007). (c) Damp Heat (Cyclic)Test : For 2 Cycles Of 24 H Each At A Temp. Of 40 Degree C & 95% RH In Accordance With IS:9000/part-5/section-1/ 1991 (reaffirmed In 2007). After Environmental Conditioning Sequence As Above And A Recovery Period Of Two Hours, The Instrument Shall Be Checked For Complete Functional Parameters, Which Should Be With In Limits.(Test Reports Are To Be Furnished When Demanded By Buyer) | Yes |
Test Report No. | 2017 |
Test Report Date | 01.12.2017 |
Name Of The Lab | ITECH |
Warranty | 1 Year |