× All the transactions performed on 2.0 is available here. To access Market click "Home".

mi 3203 insulation tester- 5kv 1tohm 5ma pi dar function (metrel)(mi 3203)

` 81,000.00

  • MRP: `104000.00

1. High Insulation Resistance measurement up to 1 T Ohm 2. Programmable test voltage 250 V, 500 V, 1 kV, 2.5 kV, 5 kV 3. Voltage and frequency measurement up to 600 V AC/DC. 4. NiMh rechargeable batteries C Type.

  • Availability: 1 In Stock
  • Min. Qty. Per Consignee: 1
  • Measurement Range - 200 K Ohm to 1 T Ohm
  • Test Voltage - 250, 500, 1000, 2500 and 5000 Volt
  • AC/DC Voltage Measurement - 600 Volt
  • AC/DC Voltage Measurement Accuracy - 2 %
  • Pass Fail Function - Yes
Other Specifications Download Specification
Type Portable
Measurement Range 200 K Ohm to 1 T Ohm
Test Voltage 250, 500, 1000, 2500 and 5000 Volt
AC/DC Voltage Measurement 600 Volt
AC/DC Voltage Measurement Resolution 0. 1 %
AC/DC Voltage Measurement Accuracy 2 %
Auto Discharge Time Less than 0.5 Second
Live Circuit Detection NA
Pass Fail Function Yes
Data Logging NA
Software Not Available
Safety Rating Category III 600 V of IEC 61010
Leakage Current 2 milliamper
Operating Temperature Range -10 to 50 °C Degree C
Operating Humidity (RH) 90% RH (0 to 40 °C) non-condensing %
Power Requirements Battery Operated
Type Of Battery NiMH Rechargeable TYPE C
PC Interface Available
Standard Accessories Supplied With The Equipment Carrying bag Mains cable 10 kV shielded test lead set, 2 m (black, red) 10 kV alligator set (black, red) Test lead with alligator clip, 2 m (green) 6 x 1.2 V NiMH batteries Handbook "Guide to modern insulation testing" on CD Instruction manual Product verification data
Dimensions (H X W X L) 310 x 130 x 250 mm mm x mm x
Weight 3000 gms
Availability Of Test Reports From Central Govt / NABL Approved / ILAC Acredited Lab To Prove Conformity To The Specification Including Environmental Tests As Under : (a) Dry Heat : For 16 Hrs. At A Temp. Of 55 Degree C In Accordance With IS:9000/part-3/section-5/1977 (reaffirmed In 2007). (b) Cold Test : For 4 Hrs. At A Temp. Of -20 Degree C In Accordance With IS:9000/part-2/section-4/1977 (reaffirmed In 2007). (c) Damp Heat (Cyclic)Test : For 2 Cycles Of 24 H Each At A Temp. Of 40 Degree C & 95% RH In Accordance With IS:9000/part-5/section-1/ 1991 (reaffirmed In 2007). After Environmental Conditioning Sequence As Above And A Recovery Period Of Two Hours, The Instrument Shall Be Checked For Complete Functional Parameters, Which Should Be With In Limits.(Test Reports Are To Be Furnished When Demanded By Buyer) Yes
Test Report No. MI3203
Test Report Date 10-07-2014
Name Of The Lab Metrel DD
Warranty 1

Price Dekho Price Dekho Price List in india