1-800-419-3436 / 1-800-102-3436 
Support Desk
×
All the transactions performed on 2.0 is available here. To access Market click "Home".
lathe machine.
| Other Specifications Download Specification | |
|---|---|
| Lathe Machine Confirming To IS 6893-1988part 1 With Latest Amndmt. | Yes |
| Lathe Machine Confirming To IS 210 :1993 With Latest Amndmt. | Yes |
| Manually Operated Lathe | Yes |
| Geared Mechanism | Yes |
| Distance Between Centers (mm) X Swing Over Bed (mm) | 1500 x 750 |
| Type | Standard |
| Distance Between Centres | 1500 mm |
| Swing Over Bed | 750 mm |
| Center Height | 375 mm |
| Swing Over Cross Slide | 450 mm |
| Swing Over Carriage Wing | 650 mm |
| Swing In Gap | 950 mm |
| Width Of Gap In Front | 180 mm |
| Type Of Bed | 2 V 2 FLAT |
| Length Of Bed | 2400 mm |
| Width Of Bed | 375 mm |
| Gap In Bed | 180 mm |
| Rapid Transverse Of Saddle | 0 mm |
| Rapid Transverse Of Cross Slide | 0 mm |
| Maximum Feed Force | 3000 N |
| Maximum Facing Diameter | 750 mm |
| Maximum Weight Of Workpiece That Can Be Held Between Chuck And Supported By Live Centre | 1200 kg |
| Maximum Weight Of Workpiece That Can Be Held Between Chuck And Supported By Dead Centre | 1500 kg |
| Torque ,Maximum On Spindle | 6 Nm |
| Type Of Spindle | METRIC |
| Size Of Spindle | 210 mm |
| Type Of Spindle Nose | A-2-8 |
| Taper Bore In Spindle As Per IS 2582-1972 With Latest Amndmt. | METRIC |
| Taper Bore In Spindle Sleeve As Per IS1715-1986 With Latest Amndmt. | MT-6 |
| Bore In Spindle | 100 mm |
| No. Of Spindle Speed In Forward Direction | 12 |
| No. Of Spindle Speed In Reverse Direction | 12 |
| Spindle Speed Range In Forward Direction | 35-1000 |
| Spindle Speed Range In Reverse Direction | 35-1000 |
| Type Of Chuck | 3 Jaw Self Centered |
| Diameter Of Chuck ,Maximum | 250 mm |
| Diameter Of Chuck ,Minimum | 300 mm |
| Travel Of Cross Slide | 375 mm |
| Travel Of Top Slide | 180 mm |
| Type Of Tool Holder | FOUR WAY SQUARE |
| Tool Shank Size As Per IS 1983:1958 With Latest Amndmt.(mm X Mm) | 40 X 40 |
| Tail Stock Sleeve Diameter | 63 mm |
| Tail Stock Spindle Taper As Per IS 1715:1986 With Latest Amndmt. | MT-5 |
| Maximum Offset Of Tailstock On Either Side Of Center Line | 10 mm |
| Sleeve Travel Type ( Tail Stock) | Manual |
| Travel Of Sleeve | 180 mm |
| Lead Screw Diameter | 38 mm |
| Lead Screw Pitch | 6 mm |
| Lead Screw Feed Range ( Longitudnal Mm/min) | 0.040 TO 1.900 (MM/REV) |
| Lead Screw Feed Range ( Cross In Mm/min) | 0.002 TO 0.158 (MM/REV) |
| Metric Thread Range In Mm | 0.5 TO 7.5 |
| British Thread Range In TPI | 60 TO 4 TPI |
| Module Of Thread | 3.5 mm |
| Diameteral Pitch | 120 mm |
| Rapid Traverse Motor Power In Kw | 0 kw |
| Type Of Cooling | AIR COOLED |
| Coolant Pump Output As Per IS 2161 :1962 With Latest Amndmt. | 0.15 kw |
| Coolant Pump Speed In Rev/min | 2800 |
| Coolant Pump Discharge At Maximum Working Height As Per IS 2161 :1962 With Latest Amndmt.in L/min | 55-75 |
| Type Of Lubrication | OIL BATH |
| Length Of Lathe Machine | 2500 mm |
| Width Of Lathe Machine | 900 mm |
| Height Of Lathe Machine | 950 mm |
| Weight Of Lathe Machine With Electrical And Standards Accessories | 1950 kg |
| Noise Emitted By Machine As Per IS 10998:1984with Latest Amndmt. | 85 dB |
| Mechanical Guarding As Per IS 9474 :1980 With Latest Amndmt. | Yes |
| Colour Of Lathe Machine As Per IS 5 :1978with Latest Amndmt. | APPLE GREEN |
| In Possession Of Technical Evaluation Report As Per IS :11118 | Yes |
| Lead Screw -Ground Profile& Pitch Accuracy 0.03 Mm Over A Length Of 300 Mm. | Yes |
| Machine Confirming Full Power Cutting Load Test To Full Length Turning Capacity Of Machine | Yes |
| Lubrication System Requirement As Per IS:11118 | Yes |
| Cooling System Requirement As Per IS :11118 | Yes |
| Positioning Accuracy Meets The Minimum Requirement As Per IS:1878 For Cumulative Error | Yes |
| Positioning Accuracy Meets The Minimum Requirement As Per IS:1878 For Repeatibility | Yes |
| Positioning Accuracy Meets The Minimum Requirement As Per IS:1878 For Backlash | Yes |
| Positioning Accuracy Meets The Minimum Requirement As Per IS:1878 For Minimum Possible Requirement | Yes |
| Geometric Accuracy Test Of General Purpose Parallel Lathe Machines As Per IS 1878-1971 With Latest Amndmt. | Yes |
| Geometric Accuracy Test Of Precision Lathe Machines As Per IS 6040-1972 With Latest Amndmt. | Yes |
| Machine Bed & Tail Stock Casting Grade Confirming To FG-260 With Hardness 180-230BHN As Per IS 11118-1997 With Latest Amndmt. | Yes |
| Tailstock Sleeve Case Hardening Steel 15Ni7Cr4M02 ,, Hardened And Ground To A Hardness Of 58-62 HRCas Per IS 1118-1997 With Latest Amndmt. | Yes |
| Head Stock Drive Gears Confirming To Alloy Steel Material Specification 15 Ni 7 Cr 4 M02 , Hardened 58-62 HRC And Profile Ground With 0.8 Micron Surface Roughness Ra Value | Yes |
| Main Spindle Confirming To C2R Grade Forged Steel And Hardened 58-62 HRC. / Ground With 0.8 Micron Surface Roughness Ra Value | Yes |
| Main Spindle Bearing Confirming Pre-loaded GAMET/TIMKEN Make Spindle Bearing High Precision Class Double Row Taper Roller Bearings At Front & Single Row Taper Roller Bearing At Back | Yes |
| Machine Confirming Dynamically Balanced Spindle And Other Parts Rotating With Peripheral Speed Of More Than 3m/sec | Yes |
| Spindle Forward/Reverse Drive Transmission Through Hydraulic Friction Clutch | No |
| "Electric Equipment I.e. Motor And Control Gear Suitable For Operation On 415 V, 3 Phase, 50 Hz., 4 Wire, A.C.supply With Suitable Ammeter " | Yes |
| DRIVING PLATE WITH PEG | Yes |
| Coolant Equipment & Swarf Tray | Yes |
| SPLASH GAURD : | Yes |
| SPINDLE REDUCTION SLEEVE: | Yes |
| 60Deg.DEAD CENTRE-2 Nos.: | Yes |
| ROTATING CENTE-1Nos.: | Yes |
| QUICK CHANGE TOOL POST WITH TOOL HOLDERS | Yes |
| QUICK INDEXIBLE SQUARE TOOL POST | No |
| SET OPERTING INSTRUCTION MANUAL& A SET OF OPERATING TOOLS. | Yes |
| 3Jaw Self Centring Chuck | Yes |
| Precision 3 Jaw Self Centring Chuck ( Hydraulic /Pneumatic Complete Chuck ) | No |
| Chuck Gurad | Yes |
| Rear Tool Post | Yes |
| Universal Face Plate | Yes |
| Precision Face Plate | Yes |
| Cast Iron Face Plate | Yes |
| Collet Chuck & Collets. | Yes |
| Rear Tool Holder. | Yes |
| Steady Rest. | Yes |
| Roller Steady Rest | No |
| Follow Rest | Yes |
| Longitudinal Stop. | No |
| Roller Stop. | No |
| Taper Turning Attachment. | Yes |
| A Set Of Change Gear For DP Threads. | Yes |
| Multi Copying Attachment | No |
| Machine Lamp | Yes |
| Swraf Tray Complete With Coolant Equipment | Yes |
| Four Jaw Chuck | Yes |
| Availability Of Drawing For Foundation | Yes |
| Warranty | 1 Years |
| Annual Maintenance Contract For Machine | Yes |
| Period Of AMC | 0 Years |
| Availability Of Test Report From Central Govt./NABL/ILAC Acredited Lab To Prove Confirmity To Specification | Yes |
| Test Report No. | 18443 |
| Test Report Date | 15/3/2017 |
| Name Of The Lab | accurate leb |
| Address Of The Lab | amer nager rajkot 360004 |
| Purpose Classification | General Purpose |
| Lathe Machine Type | Center Lathe |
| Main Motor Power ( For Light Duty Lathe ≥ 3kw,For High Speed Precision Lathe ≥ 11kw, For Heavy Duty Lathe ≥ 18kw) | 5.59 kw |
| Erection And Commisioning Charges Included In Offered Prices Without Foundation | Yes |
| Spindle Forward/Reverse Drive Transmission Through Electro Magnetic Double Clutch | No |
| Nature Of Duty Of Operation Of Lathe | High Speed Precision Lathe |
Price Dekho Price List in india© 2018 GeM All rights reserved.
