1-800-419-3436 / 1-800-102-3436 
Support Desk
×
All the transactions performed on 2.0 is available here. To access Market click "Home".
Temperature detecting displaying and analysing equipment used at industrial and Institutional purpose and monitor a wide span of spectrum up to the full frequency range of the analyzer with stepped densitydisplay Focus on the signal of interest in a complex signal environment with effective triggering mechanism such as frequency mask trigger FMT and/or time qualified trigger TQT See small signals in the presence of large ones with up to 78 dB spurious-free dynamic range Eliminate the need for a dedicated instrument RTSA is an upgrade option for new and existing UXAs/PXAs/MXAs Go deeper and thoroughly analyze complex signals with 89600 VSA software. Calibration Options IEC 751 Class A accuracy Calibration schedule, resistance shift stabilised 1,000 hours at 400 C, 63.3 sensor response in water flowing at 3 ft/s 0.9 m/s, Insulation Resistance 500 x 106 ohms..
| Other Specifications Download Specification | |
|---|---|
| Frequency Range | 20Hz - 3 GHz |
| Display Type | LCD Backlit SCADA Enabled |
| Capture/Demodulation Bandwidth (Max.) | 25 MHz |
| I/Q Memory Depth (256 MB) | Yes |
| Trigger | Free Run, Power Trigger, External |
| Traces Types | Normal (RMS), Average, Max. Hold, Min. Hold |
| Sample Rate | 100 Ms/s |
| Ref. Frequency Aging (1 X 10 ^ -7) | 1 X 10 ^ -7 |
| Measurement Range (DANL To Max. Safe Input Level) | 20 dBm/Hz - dBm |
| Max. Safe Input Level (Should Be Less Than Or Equal To +30 DBm ) | Yes |
| Displayed Average Noise Level ( 10 MHz To 3/6/13/26.5 GHz, DANL Should Be Less Than Or Equal To -130 DBm/Hz ) | Yes |
| Modulation Analysis | AM, FM, PM, BPSK, QPSK, Pi/4 DQPSK, 8PSK, 16SQAM, 32QAM, 64QAM, 128QAM, 256QAM, GMSK,GFSK |
| "Multi Domain Analysis With Stand Alone Software" | Time, Frequency, Modulation, Spectrogram |
| Automatic Measurement (Time Mode) | IQ vs Time, Power vs Time, Frequency vs Time, CCDF, crest factor, Pulse Measurements: Pulse Width, Pulse Peak Power, On/Off Ratio, Pulse Ripple, Pulse Repetition Interval, Duty Cycle Pulse-Pulse, Phase, Channel Power, Occupied BW, Frequency Deviation |
| Interface | USB, LAN/GPIB |
| Operating Temperature | 5 to 40 degree C and 80 % RH at 40 degree C |
| Power Requirements (230 +/- 10% VAC, 50 Hz) | Yes |
| Rack Mount Kit For Signal Analyzer | Yes |
| Availability Of The Test Report From Central Govt./ NABL/ ILAC Accredited Lab As Per Doc Correction Slip No. 38 Dtd 18/1/12 To Be Read In Conjunction With P&C Circular No. 71 Dtd 29/10/14 For Each Model Of Signal Analyzer. | Yes |
| TTC No. & Date | FFS9011 |
| Name Of The Lab | Ascon Labs |
| Address Of The Lab | Indore |
| Type Test Reports Shall Consist Of Verification Of All The Features & Functional Parameters & Environmental Tests. | Yes |
| Dry Heat Test: For 16 Hrs At A Temp. Of 55 Degree C In Accordance With IS: 9000/part-3/section-5/1977 (reaffirmed 2004). The Analyzer Shall Be Checked For All The Functional Requirements Before And After 1-2 Hours Of Recovery Period After The Completion Of The Above Environmental Test. During The Last Half An Hour Of Conditioning Frequency Stability Shall Be Checked. And,the Result Shall Be Satisfactory. | Yes |
| Cold Test: For 4 Hrs At A Temp. Of (-)10 Degree C In Accordance With IS: 9000/part-2/section-4/1977(reaffirmed 2004). The Analyzer Shall Be Checked For All The Functional Requirements Before And After 1-2 Hours Of Recovery Period After The Completion Of The Above Environmental Test. During The Last Half An Hour Of Conditioning Frequency Stability Shall Be Checked. And,the Result Shall Be Satisfactory. | Yes |
| Damp Heat Test: For 2 Cycles Of 24 Hrs (12 + 12h) Each At A Temp. 40 Degree C & 95% RH In Accordance With IS: 9000/part-5/section-1/1981 (reaffirmed 2004). The Analyzer Shall Be Checked For All The Functional Requirements Before And After 1-2 Hours Of Recovery Period After The Completion Of The Above Environmental Test. During The Last Half An Hour Of Conditioning Frequency Stability Shall Be Checked. And,the Result Shall Be Satisfactory. | Yes |
| The Scope Of Supply Shall Include One Set Of Operation And Maintenance Manual For Each Equipment. | Yes |
Price Dekho Price List in india© 2018 GeM All rights reserved.
