Microtek Micro-Controller Based High-Efficiency Solar Charge Controller Is Best Suited For Low-Power Solar Applications.The Micro-Controller In Microtek Solar Charge Controller, Senses The Battery Full-Charge Voltage And It Cuts Off The Battery From Charging, When It Reaches Full Charge Status. It Reconnects The Battery If The Battery Charge Drops To A Preset Level.Microtek Solar Charge Controller Also Disconnects The Solar Panel From The Battery To Avoid The Reverse Current Flow From The Battery To Panel During Night.This Product As Been Specially Designed To Upgrade Any Conventional Ups/Inverter In To Solar Ups/Inverter With Setting Of First Priority Given To Solar While Charging. The Charge Has Been Programmed To Connect And Disconnect The Ac Mains To Ups/Inverter Depending Upon The Battery Voltage Levels To Ensure Use Of Solar As Primary Power And Mains Only For The Emergency.Technical SpecificationsModel No Mtk3012 ScSystem Voltage 12Maximum Solar Panel Watts 360 WpMax.
Other Specifications Download Specification | |
---|---|
Rating In KVA & Min. VAH Capacity Of Battery | 0.8 KVA/3456 VAH |
Technology | MOSFET-PWM |
Inverter Governing Specification | Generally conforming to IS:13314 |
Input | Single Phase sine wave(120 to 260 V) |
Output | Single Phase sine wave 230 V |
Inverter Efficiency | 87 % |
Energy Star Rating | 3 |
Total Harmonic Distortion | 3 |
Overload Of Rated Load | 10 |
Overload Time | 10 Minutes |
Battery Cut-off Voltage To Protect From Overdischarge | 10.5 Volt |
Degree Of Protection | IP 21 |
Climatic Test Report As Per Clause 7.10.1 Of IS 13314 | yes |
Availability Of The Type Test Report From Central Govt. /NABL/ILAC Accredited Lab | Yes |
Type Test Certificate No. | NA |
Type Test Certificate Date | NA |
Name Of Lab | NA |
Address Of Lab | NA |
Type Of Battery | Tubular battery confirming to IS:13369 |
Backup Time | 180 Minutes |
Type Of Enclosure | CRCA Steel |
Thickness Of Sheet For Enclosure | 1.2 mm |
Trolley | without trolley |
Trolley Material | CRCA Steel |
Thickness Of Sheet For Trolley | 1.2 mm |