solar PCU 25 KW MPPT Maximum Power Point Tracking designDSP based technologyPFC based IGBT grid charger up to 100AMP capacity parallel configuration is possible for higher ratings grid charger MPPT controller concord/atlasPure sine wave output with low THDPulse by pulse current limiting with auto reset resulting in efficient overload short circuit protectionDC reverse polarity battery deep discharge protectionInbuilt galvanic isolation transformerAdvanced remote monitoring softwareoptionalLCD display for metering input output parametersLCD Metering- PV voltage, current, KW, KWH, Grid voltage, current, frequency, battery voltage, status Buffer for battery backup in emergencyPower quality Audit / Scheduled shutdown / digital graphical representation of parameter optional.
Other Specifications Download Specification | |
---|---|
Rating Of Inverter | 25 KVA |
ISI Marked | YES |
If ISI Marked Yes, CM/L No. | IS 6942:1984 |
Mode Of Operation | To be used in conjunction with AC mains |
Nos. Of Phase | Three |
Inverter's Output Wave Form | Pure sine wave |
Inverter Efficiency | 93 |
Switching Device | IGBT |
Total Harmonic Distortion | 3 % |
Operating AC Voltage Range | 290-400 Volts |
Operating Frequency Range | 0-50 Hz |
Operating Temperature | 0-50 degree cel |
Operating Relative Humidity | 95 % |
Load Power Factor | 0.8 |
Maximum Power Point Tracking(MPPT) | yes |
Galvanic Isolation Between Input DC & Output AC | yes |
Ingress Protection Rating Of Inverter | IP 65 for outdoor use |
Built In Protection For AC High/low Voltage & Frequency If Connected To AC Mains | IP 65 for outdoor use |
Output Regulation At Rated Voltage | Yes |
By-pass Facility If Connected To AC Mains | IP 65 for outdoor use |
Over Load Protection 110% For 60 Seconds ,125% For 30 Seconds And 150% For 5 Seconds | yes |
Display Type | LCD |
Display Parameters Like DC Voltage(V),DC Current (A), AC Voltage (V) | YES |
Conformity Of Inverter To Environmental Testing Conditions As Per IEC 600688-2 (1,2,14,30) Or Equivalent BIS Standard | YES |
Sequence Of Power Drawing | 1. SPV 2. AC Mains( if connected with AC power) 3. Battery bank |
Nos. Of Modules In An Array | 100 NOS. |
Rating Of Individual PV Module | 250 Wp |
Efficiency Of Solar Panel | 15.4 % |
Reverse Polarity Protection For PV Modules | yes |
90% Performance Warranty For SPV | 10 years |
80% Performance Warranty For SPV | 25 years |
Salt Mist Corrosion Resistant Material For Body & Frame Of SPV Module | Aluminium |
Area Required For Installation Of Solar Pannels With Mounting Structure | 250 sq. mt |
TTC For PV Module From Any MNRE Lab As Per MNRE 2015-2016 | yes |
Test Report Number | KIP0001136 |
Date Of Test Report | 04/28/2016 |
Name And Address Of Laboratory | KIWA |
OEM Test Report For Indigenously Produced PV Module(s) | yes |
Provision For Solar Generation Meter | yes |
Provision For Bidirectional Meter(Net Meter) | yes |
Provision Of Anti Rusting/ Non Corrosive Mounting Structure | yes |
Material Of Mounting Structure | Galvanised steel |
Sustainability Of Wind Speed. | 200 KM/Hr |
Type Of Battery | Tubular Gel KM/Hr |
Battery Backup Time At Rated Load | 3 Hour |
Battery Bank Voltage | 240 Volt |
Capacity Of Battery Bank | 75000 VAH |
3 Stage Battey Charging ( Float, Boost & Equalize Stage ) For Long Life Of The Battery | yes |
Reverse Polarity Protection | yes |
Complete Installation Work To Be Done By Supplier | yes |
Gross Weight Of The Inverter | 350 kg |
Availability Of Type Test Report For Inverter Including Environmental Tests From Central Government/NABL/ILAC Accridiated Laboratory To Prove Conformity To The Specification | yes |
Test Report Number | 201605126 |
Date Of Test Report | 06/15/2016 |
Name And Address Of Laboratory | ENERTECH UPS PUNE |
Type Test Report To Be Furnished On Buyers Demand | yes |