Features and advantage of our products Polyethylene material Using imported polyethylene material, the material is impact resistance, high density, and uv protection. The boat is light weight, high safety, maintenance free, long service life, etc.2.Rust-proof and anti corrosion Boat Size LxWxH 520x210x206 cm Weight 450kg, Colorgray or blueload-bearing, 8-10 person or 550kg Speed 30km/h Engine 60 HP Yamaha, 2.Other accessories Stainless Steel Arch With One Light, Front Locker With Removable Cushion, One Pair of Paddles, Separate Console With Windshield, Outer Side Safety Aluminum Railing, One First Aid Box. 4.Rescue Line. 5.Personal Lighting System, WITH Boat Trailer Over Length 5660 mm, Total Width 2100 mm, Max Load 750kgs. Note Please Ignore Below Specification.
Other Specifications Download Specification | |
---|---|
Confirmity To Standards For 4.7 M Rubberised Inflated Boat (RIB) As Per ISO 6185-3 /IMO/ LSA | Yes |
Confirmity To Standards For Boat Hull Design Accordance With Classification Society (IRS/ABS/LR/BV/GL/NK/DNV/RINA) Rules And Norms Issued By NCD 4003 Issue 6, 2015 | Yes |
Hull Construction Material As Per Class Approved((IRS/ABS/LR/BV/GL/NK/DNV/RINA) | Multiaxial Non Crimp Fabric with Vinyl EsterEpoxy Resin Meeting Fire Standards of Class |
Functions Performed At Sea And In Harbour | Life Boat , Search and Rescue Boat Transport Boarding and landing party on to own or enemy ships and shoreFor carrying of working parties Passengers |
Make Of 4.7 Meters Rubberised Inflated Boat (RIB) | sunny water sport pvt ltd |
Model No. Of 4.7 Meters Rubberised Inflated Boat (RIB) | SW5.45 |
Exterior Size Of Boat , Min | 4200 x 1800 |
If Others Than Specify The Exterior Size Of Boat | 4501mm x 1961mm |
Interior Size Of Boat , Min ( Mm X Mm) | 2925 x 1000 mm x mm |
If Others Than Specify The Interior Size Of Boat ( Mm X Mm) | 3200x1000xmm mm x mm |
Deflated Size Of Hull (mm X Mm X Mm) | 1150 x 650 x 350 mm3 |
If Others Than Specify The Deflated Size Of Hull, (mm X Mm X Mm) | 4200 mm x 1800 mm mm3 mm3 |
Floor Board Size Of Boat | Others as per ISO 6185-3 mm3 |
If Others Than Specify The Floor Board Size Of Boat(mm X Mm Xmm) | 775 x 1000 x 150 mm3 mm3 |
Maximum Draught Including Appendages | 0.35 m for Hull and 0.45 m at OBM meters |
Weight Of Boat Suitable For 10 Persons , Max( Including Members Too) | 980 Kg |
Total Inflatable Chambers | 5 |
Inflatable Chamber In Main Hull | 3 |
Inflatable Chamber In Keel | 1 |
Diameter Of Tube , Min | 48 cms |
Boat Must Provide Suffucient Buyoncy That It Does Not Sink And Satisfactorly Clear Swamp Test | Yes |
Max Speed At 85% MCR Of OBM In Light Load Conditions | 30 Knot |
Economical Speed Under Full Load Condiotion | 6 Knot |
Endurance At Economical Speed And At Full Load Condition | 8 Hrs |
Inflatable Mechanism Of Boat | Foot Pump |
The Hull, Air Tuber ( Chambers) , Keels Must Made From Hyplon With 1670 Denier | Yes |
The Fabric Must Have Approval Of BSMA/IMO/LSA Or ISO 6185-3 | Yes |
Plastic Coated Transom To Form Waterproof Cocoon As Per ISO 6185-3 | Yes |
Overlapping Of Seam Of Boat | Quadruple |
5/8" Grab Line For Safety | Yes |
Weight Of Boat Without OBM And Floor Board | 90 Kg |
Inflatable Keel Diameter 18 Cm For Stability And Swift Water Rescue | Yes |
Type Of Air Valve | One way Type Confirming to International Standards like C7 or equivalent |
Make Of OutBoard Motor Engine (OBM) | Yamaha |
Model No.of OutBoard Motor Engine (OBM) | 60 |
Fuel | Petrol |
No. Of Strokes | 2 |
No . Of Cylinders | 3 |
Fuel Capacity | 50 Ltrs |
Power HP @ Rpm | 60 HP at RPM |
Engine Starting | Remote Starting |
Engine Stopping | Fuel Supply Shut Off Valve |
Fuel Injection System | Electronics Fuel Injection System |
Engine Cooling System | Watercooled with Thermostat |
Engine Lubrication | Wet Sump with Pressure |
Engine Exhaust | Propeller Type |
Trim System | Manual Type |
Type Of Steering System | yes |
Type Of Bilge System | yes |
Length Of Engine Shaft | 50 Meter |
The Engine And Drive Line Shall Be Fitted In Enclosed Housing To Protect From Sea Water | Yes |
Dry Weight ( Excluding Fittment And Accessories) | 75 Kg |
Colour Of The Boat | Others |
2 Paddle For Emergency Rowing | Yes |
Floor Board Shall Be Interlocking Type Of Ployethene Material/marine Plywood With Fibre Glass Reinforced Plastic Coating With Carry Bag | Yes |
Baot Shall Have Round/ Conical Pantoons For Rapid Planning | Yes |
Built In Oarlocks For Easy Rowing | Yes |
Two Stainless Steel "D " Rings For Towing | Yes |
Two Layer Of Material On Lower Tubes For Better Puncture Resistance And Abrasion | Yes |
Standard Tool Kit Including Open Spanner, Socket, T Handle,Extension For Socket, Screw Driver , Feeder Gauge, Box Spanner, And Torque Spanner Of Required Numbers And Sizes. | Yes |
Rating For All Electrical Fitting / Switches | IP66 |
Electric Horn Fitted On Console | 5 meters |
Suitable For Continuous Operation Up To 50 Deg Cel, Relative Humidity Of 95 % At 35 Deg Cel And Roll Of 25 Deg Cel And Pitch Of 8 Degree | Yes |
The Anchor Shall Be Connected To 27 M Long 16/20 Mm Dia Terylene Rope, Stowed On Special Hinged Horns | Yes |
Fire Extinguishers, SOLAS Aaproved | Yes |
Four Removable Rescue Patch Of 20 X 40 Cm Made Of Retro Reflecting Tape | Yes |
Mast And Navigation Lights | Yes |
Mandatory Fittment On Collar Including Rubbing Stakeof Vinyl/urethane/EPDM/Neoprene, D Rings,Anti Sid Coating Etc.as Per Standards | Yes |
Additional Fittment On Collar Including 2 Paddle Blade Pocket,1 Drought Type Fair Lead, 2 Rope Stowage Pocket,4 Securing Rings,1 Bow Rings Etc | Yes |
Life Saving Equipments In A Wooden Box Carrying First Aid Kits , One Aldi's Lamp One Throwing Quoits With Buyont Line , Distress Signal Box | Yes |
Strong Points For Towing , Anchoring, Mooring As Per ISO15084 | Yes |
Jason Cradle | Yes |
Warranty In Years | 1 Years |
Avaialbility Of Drwaing | Yes |
Instruction Manual | Yes |
No. Of Life Jackets | 9 |
No. Of Life Buoys | 3 |
Availability Of Test Report Including Environmental Testas Per ISO 6185-3 /LSA/IMO Latest Amndmt.from Central Govt./NABL/ILAC Acredited Lab To Prove Confirmity To Specification | Yes |
Test Report No. | pne/sunny/070652 |
Test Report Date | 29-06-2007 |
Name Of The Lab | indian register of shipping |
Address Of The Lab | 52A, Adi Shankaracharya Marg, Opp. Powai Lake, Powai, Mumbai, Maharashtra 400072 |