1-800-419-3436 / 1-800-102-3436 
Support Desk
×
All the transactions performed on 2.0 is available here. To access Market click "Home".
The Inflatable Boat Consists of Heavy duty Nylon 1500 Denier, Hypalon Rubber on Outer side and Polychloroprene on Inner side Use for Buoyancy tube, floor and Inflatable Keel.Rubberized fabric conforming/approval to British Standard Manufacturer Association BSMA 16 or IMO International Maritime organization LSA Life Saving Appliances regulation or equivalent.An inflatable keel of min 7 diameter is provided for keeping the boat straight while in use.A rubberized floor bonded to the bottom part of buoyancy. Inflatable Boat Valves as per Halkey Roberts Valve.Double Buoyancy tube. Boat will be IRS/DNV/BV Certified. Construction The fiberglass rigid hull is made from good quality marine grade resin and glass fibers. Adequate longitudinal and transverse fiberglass stiffeners are provided for good structural strength. Air-tight buoyancy chambers below the floor make the boat unsinkable.The inflatable collars provided around the boat is made of hypalon fabric and is abrasion resistant...
| Other Specifications Download Specification | |
|---|---|
| Confirmity To Standards For 4.7 M Rubberised Inflated Boat (RIB) As Per ISO 6185-3 /IMO/ LSA | Yes |
| Confirmity To Standards For Boat Hull Design Accordance With Classification Society (IRS/ABS/LR/BV/GL/NK/DNV/RINA) Rules And Norms Issued By NCD 4003 Issue 6, 2015 | Yes |
| Hull Construction Material As Per Class Approved((IRS/ABS/LR/BV/GL/NK/DNV/RINA) | Multiaxial Non Crimp Fabric with Vinyl EsterEpoxy Resin Meeting Fire Standards of Class |
| Functions Performed At Sea And In Harbour | Life Boat , Search and Rescue Boat Transport Boarding and landing party on to own or enemy ships and shoreFor carrying of working parties Passengers |
| Make Of 4.7 Meters Rubberised Inflated Boat (RIB) | markwel - brand of Rubberised Inflated Boat (RIB) |
| Model No. Of 4.7 Meters Rubberised Inflated Boat (RIB) | markwel 470 |
| Exterior Size Of Boat , Min | Others as per ISO 6185-3 |
| If Others Than Specify The Exterior Size Of Boat | 4501mm x 1961mm |
| Interior Size Of Boat , Min ( Mm X Mm) | 2925 x 1000 mm x mm |
| If Others Than Specify The Interior Size Of Boat ( Mm X Mm) | 3200x1000xmm mm x mm |
| Deflated Size Of Hull (mm X Mm X Mm) | 1150 x 650 x 350 mm3 |
| If Others Than Specify The Deflated Size Of Hull, (mm X Mm X Mm) | 4200 mm x 1800 mm mm3 |
| Floor Board Size Of Boat | 775 x 1000 x 150 mm3 |
| If Others Than Specify The Floor Board Size Of Boat(mm X Mm Xmm) | 780 x 1000 x 150 mm3 |
| Maximum Draught Including Appendages | 0.35 m for Hull and 0.45 m at OBM meters |
| Weight Of Boat Suitable For 10 Persons , Max( Including Members Too) | 900 Kg |
| Total Inflatable Chambers | 4 |
| Inflatable Chamber In Main Hull | 3 |
| Inflatable Chamber In Keel | 1 |
| Diameter Of Tube , Min | 48 cms |
| Boat Must Provide Suffucient Buyoncy That It Does Not Sink And Satisfactorly Clear Swamp Test | Yes |
| Max Speed At 85% MCR Of OBM In Light Load Conditions | 12 Knot Knot |
| Economical Speed Under Full Load Condiotion | 6 Knot Knot |
| Endurance At Economical Speed And At Full Load Condition | 8 Hrs |
| Inflatable Mechanism Of Boat | Foot Pump |
| The Hull, Air Tuber ( Chambers) , Keels Must Made From Hyplon With 1670 Denier | Yes |
| The Fabric Must Have Approval Of BSMA/IMO/LSA Or ISO 6185-3 | Yes |
| Plastic Coated Transom To Form Waterproof Cocoon As Per ISO 6185-3 | Yes |
| Overlapping Of Seam Of Boat | Quadruple |
| 5/8" Grab Line For Safety | Yes |
| Weight Of Boat Without OBM And Floor Board | 80 Kg |
| Inflatable Keel Diameter 18 Cm For Stability And Swift Water Rescue | Yes |
| Type Of Air Valve | One way Type Confirming to International Standards like C7 or equivalent |
| Make Of OutBoard Motor Engine (OBM) | Yamaha |
| Model No.of OutBoard Motor Engine (OBM) | inf25obm |
| Fuel | Petrol |
| No. Of Strokes | 2 |
| No . Of Cylinders | 3 |
| Fuel Capacity | 20 Ltrs |
| Power HP @ Rpm | 25 hp @ 5250RPM HP at RPM |
| Engine Starting | Remote Starting |
| Engine Stopping | Fuel Supply Shut Off Valve |
| Fuel Injection System | Electronics Fuel Injection System |
| Engine Cooling System | Watercooled with Thermostat |
| Engine Lubrication | Wet Sump with Pressure |
| Engine Exhaust | Propeller Type |
| Trim System | Manual Type |
| Type Of Steering System | manual |
| Type Of Bilge System | TILLER HANDLE |
| Length Of Engine Shaft | 45 Meter |
| The Engine And Drive Line Shall Be Fitted In Enclosed Housing To Protect From Sea Water | Yes |
| Dry Weight ( Excluding Fittment And Accessories) | 75 Kg |
| Colour Of The Boat | Orange |
| 2 Paddle For Emergency Rowing | Yes |
| Floor Board Shall Be Interlocking Type Of Ployethene Material/marine Plywood With Fibre Glass Reinforced Plastic Coating With Carry Bag | Yes |
| Baot Shall Have Round/ Conical Pantoons For Rapid Planning | Yes |
| Built In Oarlocks For Easy Rowing | Yes |
| Two Stainless Steel "D " Rings For Towing | Yes |
| Two Layer Of Material On Lower Tubes For Better Puncture Resistance And Abrasion | Yes |
| Standard Tool Kit Including Open Spanner, Socket, T Handle,Extension For Socket, Screw Driver , Feeder Gauge, Box Spanner, And Torque Spanner Of Required Numbers And Sizes. | Yes |
| Rating For All Electrical Fitting / Switches | IP66 |
| Electric Horn Fitted On Console | 5 meters |
| Suitable For Continuous Operation Up To 50 Deg Cel, Relative Humidity Of 95 % At 35 Deg Cel And Roll Of 25 Deg Cel And Pitch Of 8 Degree | Yes |
| The Anchor Shall Be Connected To 27 M Long 16/20 Mm Dia Terylene Rope, Stowed On Special Hinged Horns | Yes |
| Fire Extinguishers, SOLAS Aaproved | Yes |
| Four Removable Rescue Patch Of 20 X 40 Cm Made Of Retro Reflecting Tape | Yes |
| Mast And Navigation Lights | Yes |
| Mandatory Fittment On Collar Including Rubbing Stakeof Vinyl/urethane/EPDM/Neoprene, D Rings,Anti Sid Coating Etc.as Per Standards | Yes |
| Additional Fittment On Collar Including 2 Paddle Blade Pocket,1 Drought Type Fair Lead, 2 Rope Stowage Pocket,4 Securing Rings,1 Bow Rings Etc | Yes |
| Life Saving Equipments In A Wooden Box Carrying First Aid Kits , One Aldi's Lamp One Throwing Quoits With Buyont Line , Distress Signal Box | Yes |
| Strong Points For Towing , Anchoring, Mooring As Per ISO15084 | Yes |
| Jason Cradle | Yes |
| Warranty In Years | 1 Years |
| Avaialbility Of Drwaing | Yes |
| Instruction Manual | Yes |
| No. Of Life Jackets | 8 |
| No. Of Life Buoys | 2 |
| Availability Of Test Report Including Environmental Testas Per ISO 6185-3 /LSA/IMO Latest Amndmt.from Central Govt./NABL/ILAC Acredited Lab To Prove Confirmity To Specification | Yes |
| Test Report No. | 2016Wac027 |
| Test Report Date | 24/oct/2016 |
| Name Of The Lab | indian register of shipping |
| Address Of The Lab | 52A, Adi Shankaracharya Marg, Opp. Powai Lake, Powai, Mumbai, Maharashtra 400072 |
Price Dekho Price List in india© 2018 GeM All rights reserved.
