PRESTIGE 3335 PRISON VAN BSIV.
Other Specifications Download Specification | |
---|---|
Engine Capacity | 3.45 Litres |
Conformity To G.S.R.287(E),Central Motor Vehicles(4th Amend)Rules,2015 And Prison Van As Per New BUS BODY CODE AIS-052(Revision-2008)with All Amendments Till Date. | Yes |
Vehicle Certification ARAI/VRDE/ICAT No. | VAMN0009 |
Make Of Chassis | SML |
Type Of Chassis | Full Frame chassis |
Chassis Model No. | PRESTIGE |
Category Of Vehicle For Which Chassis To Be Used | Light Capacity Commercial Vehicles |
Body Style | PRISON VAN |
Body Options | Fixed Side Deck |
Type Of Fuel | Diesel |
Vehicle Emission Complaince | BS-IV |
Vehicle Mileage ( Declared By OEM As Certified By Test Agency Under Rule 115of CMVR 1989) | 8 Km/Litres |
Speed, Max | 80 Km/Hr |
Engine Power BHP@rpm | 100 HP @ 2800 RPM BHP@rpm |
Engine Torque Max,@ Rpm | 310 NM @ 1500 RPM N-M@rpm |
Engine Aspiration | Turbocharged |
No. Of Cylinder In Engine | 4 Nos |
Fuel Tank Capacity | 90 Litres |
Length Of Chassis | 5954 mm |
Width Of Chassis | 2200 mm |
Height Of Chassis | 2845 mm |
Gradeability Of Chassis( %) | 18 % |
Ground Clearance | 206 mm |
Wheel Base | 3335 mm |
Kerb Weight | 2970 Kg |
Gross Vehicle Weight | 6440 Kg |
No Of Axle | 2 Nos |
Axle Configuration ( No. Of Outside Tyre X No. Of Driving Tyre) | 4X2 |
Type Of Front Axle And Suspension System | REVERSE ELLIOT I SECTION FRONT AXLE SEMI ELLIPTICAL LAMINATED LEAF SPRING WITH SHOCK ABSORBER |
Type Of Rear Axle And Suspension System | FULL FLOATED BENJO TYPE REAR AXLE SEMI ELLIPTICAL LAMINATED LEAF SPRING |
BIS Marked Pneumatic Tyres And Tubes For Both Front And Rear | Yes |
Size Of Front Tyres | 7.50X16-16 PR mm |
Size Of Rear Tyres | 7.50X16-16 PR mm |
Size Of Wheel | 7.50X16-16 PR mm |
Chassis Transmission System | Manual |
No. Of Speed/ Forward Gears | 5 |
Type Of Steering | Power |
Turning Radius | 7000MM mm |
Speed Governers | No |
ABS Fitted | Yes |
Front Vehicle Brake | DUAL CIRCUIT VACCUM ASSISTED |
Rear Vehicle Brake | DUAL CIRCUIT VACCUM ASSISTED |
Type Of Clutch | DRY SINGLE PLATED DIPHRAGM HYDRAULICALLY OPERATED |
Side View Mirror | Yes |
Low Fuel Warning Light | Yes |
Fog Lights | Yes |
Standard Sparewheel And Tool Kit | Yes |
Seating Capacity Rear Compartment For Prisoners | 18 Nos |
Seating Capacity Rear Compartment For Guards | 2 Nos |
Seating Capacity Cabin | 2+1 Nos |
Seating Capacity Layout | Yes |
Flooring Made Out Corrugated Sheet | Cold Rolled Drawn steel as per IS 513 |
Thickness Of Flooring Sheet | 1.6MM |
Frame Type | LADDER TYPE |
No Of Side Runner/vertical Structral Member | 8 |
Side Paneling | 1.2 mm thick Corrugated Section (15mm wide CS ) and 1 mm thick Panel starting from window to Roof |
No. Of Cross Members Floor | 9 Nos |
Super Structure Constuction Details As Per New BUS BODY CODE AIS-052(Revision-2008)with All Amendments Till Date, Material Type/grade/thickness | This is CMVR approved |
Body Height Inside | 1900MM mm |
Front Wall Thickness | 15mm wide corrugated section of 1.2 mm thick mm |
Rear Wall Thickness | 55MM mm |
Door For Unloading/loading | Full |
Door Wall Thickness | 55 mm |
Prisoner Compartment Door | Steel with wire Mesh |
Prisoner Compartment Door Wall Thickness | 40 mm |
All Windows In Prisoner Compartment Wire Mesh With Foldable Tarapaulin Curtain | YES |
Front Bumper Hook | Yes |
Rear Hook | Yes |
Fire Extinguisher | Yes |
Warranty Time | 12 Month |
Warranty Distance | 24000 Km |
Battery Warranty | 12 Months |
No. Of Free Service | 7 Nos |
Transportation Charge In Rupees Per Km | 13.5 Rs/Km |