1-800-419-3436 / 1-800-102-3436 
Support Desk
×
All the transactions performed on 2.0 is available here. To access Market click "Home".
4.5 Digit 20000 count True RMS Industrial Multimeter with Motor Drive Measurement Function,EN 61010-1 CAT-III 1000V / CAT - IV 600V safety rating, Accuracy - 0.05 percent, Voltage measurement - 1000V AC/DC, 10A continuous_20A for 30 sec_AC/DC Current measurement with Peak Transient capture upto 250us and 20kHz bandwidth, Special Low Pass Filter to accurately measure output at VFD,With Resistance - 50Mohm, Temperature - 1090 Deg C, Frequency - 200kHz and Capacitance - 10000 micro F, Conductance - 50nS measurement, Min, Max, Avg recording, Duty cycle and pulse width measurement, Data hold, Continuity and Diode test, Relative mode, Large backlit display with bar graph,Supplied with TL75 test leads, Statement of Calibration, Lifetime Year warranty...
| Other Specifications Download Specification | |
|---|---|
| Type | Hand Held |
| Display | 4.5 Digit |
| Measurement Type | True RMS |
| Count | 50000 |
| AC Voltage Measurement | 600 Volt |
| AC Voltage Measurement Accuracy | 0.5 % |
| DC Voltage Measurement | 600 Volt |
| DC Voltage Measurement Accuracy | .05 % |
| AC Current Measurement | 10 Ampere |
| AC Current Measurement Accuracy | 0.5 % |
| DC Current Measurement | 10 Ampere |
| DC Current Measurement Accuracy | 0.5 % |
| Resistance Measurement | 100 Mega Ohm |
| Resistance Measurement Accuracy | 1.5 % |
| Frequency Measurement | 300 Kilo Hertz |
| Frequency Measurement Accuracy | 0.1 % |
| Capacitance Mreasurement Range | .01 to 1000 Micro Fara |
| Capacitance Measurement Accuracy | 1.5 % |
| Temperature Measurement | -50 to 1000 Degree C |
| Temperature Measurement Accuracy | 1.5 % |
| Feature Of Continuity Test And Diode Test | Available |
| Feature Of Data Logging | Available |
| If Data Logging Feature Is Available, Internal Memory | min. 5000 points 200 readings |
| Computer Interface Alongwith Software | Not Available |
| True RMS AC Voltage Band Width | 100 |
| Safety Rating | Category IV 600 V of IEC 61010 |
| Overload Protection | Through Fuse |
| Operating Temperature Range | -20 C to +55 C |
| Operating Humidity (RH) | 0 - 90 (0C - 35C),0 - 70 (35C - 55C) |
| Power Requirements | 230 V +-10 AC, 50 Hz +- 3 through Adaptor |
| Safety Certification (Certificate To Be Furnished When Demanded By Buyer) | UL |
| If Battery Operated, Type And No. Of Battery | 9 volt, 01 no. |
| Total Voltage Of Battery | 9 V |
| Standard Accessories Supplied With The Equipment | TL75 test leads,AC175 Alligator Clips, Holster,9V battery (installed),80BK temperature probe |
| Dimensions (H X W X L) | 203.5 mm x 94.4 mm x 59.0 mm mm x mm x mm x mm x |
| Weight | 527±5 g with battery gms gms |
| Availability Of Test Reports From Central Govt / NABL Approved / ILAC Acredited Lab To Prove Conformity To The Specification Including Environmental Tests As Under : (a) Dry Heat : For 16 Hrs. At A Temp. Of 55 Degree C In Accordance With IS:9000/part-3/section-5/1977 (reaffirmed In 2007). (b) Cold Test : For 4 Hrs. At A Temp. Of -20 Degree C In Accordance With IS:9000/part-2/section-4/1977 (reaffirmed In 2007). (c) Damp Heat (Cyclic)Test : For 2 Cycles Of 24 H Each At A Temp. Of 40 Degree C & 95% RH In Accordance With IS:9000/part-5/section-1/ 1991 (reaffirmed In 2007). After Environmental Conditioning Sequence As Above And A Recovery Period Of Two Hours, The Instrument Shall Be Checked For Complete Functional Parameters, Which Should Be With In Limits.(Test Reports Are To Be Furnished When Demanded By Buyer) | Yes |
| Test Report No. | 397542 |
| Test Report Date | 27-09-2017 |
| Name Of The Lab | FLUKE |
| Warranty | 5 Year |
Price Dekho Price List in india© 2018 GeM All rights reserved.
