1-800-419-3436 / 1-800-102-3436 
Support Desk
×
All the transactions performed on 2.0 is available here. To access Market click "Home".
True RMS multimeter 3100 counts, 0.1 basic DC accuracy.
| Other Specifications Download Specification | |
|---|---|
| Type | Hand Held |
| Display | 3.5 Digit |
| Measurement Type | True RMS |
| Count | 4000 |
| AC Voltage Measurement | 600 Volt |
| AC Voltage Measurement Accuracy | 0.5 % |
| DC Voltage Measurement | 600 Volt |
| DC Voltage Measurement Accuracy | 0.1 % |
| AC Current Measurement | 10 Ampere |
| AC Current Measurement Accuracy | 1.5 % |
| DC Current Measurement | 10 Ampere |
| DC Current Measurement Accuracy | 1.5 % |
| Resistance Measurement | 40 Mega Ohm |
| Resistance Measurement Accuracy | 1 % |
| Frequency Measurement | 100 Kilo Hertz |
| Frequency Measurement Accuracy | 0.1 % |
| Capacitance Mreasurement Range | 1 to 100 Micro Fara |
| Capacitance Measurement Accuracy | 1.5 % |
| Temperature Measurement | -50 to 1000 Degree C |
| Temperature Measurement Accuracy | 1.5 % |
| Feature Of Continuity Test And Diode Test | Available |
| Feature Of Data Logging | Not Available |
| If Data Logging Feature Is Available, Internal Memory | NA |
| Computer Interface Alongwith Software | Not Available |
| True RMS AC Voltage Band Width | NA |
| Safety Rating | Category IV 600 V of IEC 61010 |
| Overload Protection | Through Fuse |
| Operating Temperature Range | -10 to 50 Deg C |
| Operating Humidity (RH) | 75 |
| Power Requirements | 230 V +-10 AC, 50 Hz +- 3 through Adaptor |
| Safety Certification (Certificate To Be Furnished When Demanded By Buyer) | CSA |
| If Battery Operated, Type And No. Of Battery | Rectangular battery |
| Total Voltage Of Battery | 9V |
| Standard Accessories Supplied With The Equipment | 1 multimeter 1 Probe Set 1 copy of operating instructions 1 test certificate 1 rubber holster with tilt stand and carrying strap warranty card 1 set of extra fuses. |
| Dimensions (H X W X L) | 84 mm x 195 mm x 35 mm mm x mm x |
| Weight | 350 gms |
| Availability Of Test Reports From Central Govt / NABL Approved / ILAC Acredited Lab To Prove Conformity To The Specification Including Environmental Tests As Under : (a) Dry Heat : For 16 Hrs. At A Temp. Of 55 Degree C In Accordance With IS:9000/part-3/section-5/1977 (reaffirmed In 2007). (b) Cold Test : For 4 Hrs. At A Temp. Of -20 Degree C In Accordance With IS:9000/part-2/section-4/1977 (reaffirmed In 2007). (c) Damp Heat (Cyclic)Test : For 2 Cycles Of 24 H Each At A Temp. Of 40 Degree C & 95% RH In Accordance With IS:9000/part-5/section-1/ 1991 (reaffirmed In 2007). After Environmental Conditioning Sequence As Above And A Recovery Period Of Two Hours, The Instrument Shall Be Checked For Complete Functional Parameters, Which Should Be With In Limits.(Test Reports Are To Be Furnished When Demanded By Buyer) | Yes |
| Test Report No. | QAS/05-06/DMMcatIV |
| Test Report Date | 8/2/2006 |
| Name Of The Lab | Rishabh Instruments Private Limited |
| Warranty | 3 Year |
Price Dekho Price List in india© 2018 GeM All rights reserved.
